TL;DR:
We have new enclosures and mounting plates:
- Mounting Plate 22x22 (12x12cm),
- Mounting Plate 22x22 (12x12cm) with cable lead-through,
- Mounting Plate 46x22 (24x12cm) and
- Mounting Plate 46x22 (24x12cm) with cable lead-through.
Rail Mounting Case
To use Tinkerforge on a DIN rail you can use the Rail Mounting Kit. This has been available for a while, but it can only mount one stack of Bricks.
Our new Rail Mounting Case has enough space for lots of different Bricks and Bricklets. Fully equipped it has enough space for 8 Industrial Bricklets and additionally up to 4 4x4cm modules (Bricks / Master Extension / Step-Down Power Suply). Additionally the new enclosure has a top lid that can be opened. If closed it protects the Bricks and Bricklets against dust and accidental contact of the electronics.
The enclosure is highly customizable. The side walls are compatible to each other and they can be put into different places. Because of this you can mount Bricks and Bricklets freely and the enclosure can easily be customized for your individuel project.
The second floor of the enclosure has a mounting plate that can mount any Bricklet. It is for example possible to mount an OLED display including a push button. As an example you could show status information about your control cabinet on the display and use the button to switch between different measured values.
Tinkerforge Workbench with 34x20cm
The Tinkerforge Workbench is perfect for everybody that wants to experiment with Tinkerforge components and wants to present the project in a tidy way. The Tinkerforge Workbench is also the best-selling product that we produce with our laser cutter. Since we often got inquiries about a bigger version, we want to offer one now.
Alongside the old Workbench with a size of 20x14cm we will now have an additional Workbench with a size of 34x20cm. It can be used to mount a huge assortment of different Bricks and Bricklets.
Four new Mounting Plates: 12x12cm and 24x12cm each with and without cable lead-through
For many years have been selling a Mounting Plate with a size of 12x6cm. The plate has a 5mm pitch pattern of 3mm holes. We would like to add four additional new Mounting Plates with different sizes.
The new Mounting Plates are:
- Mounting Plate 22x22 (12x12cm),
- Mounting Plate 22x22 (12x12cm) with cable lead-through,
- Mounting Plate 46x22 (24x12cm) and
- Mounting Plate 46x22 (24x12cm) with cable lead-through.
A cable lead-through in the Mounting Plate was often wished for. With the new bigger sized Mounting Plates there is now enough space to add it. The cable lead-through is big enough to fit one of our 8-pole connectors of the Industrial Bricklets (which means that it is also big enough for a USB cable or Bricklet cable).