Bricklets (Legacy)
The legacy Bricklets are old Bricklets with 10 pole connector. They are sold with a discount and they are only available as long as there is stock left. All of these Bricklets have a 7 pole replacement in the Bricklet category.
-
Incl. 19% Tax, excl. Shipping Cost€0.99
- Detects inclination of Bricklet (tilt switch open/closed)
- Detects if Bricklet is vibrating
-
Incl. 19% Tax, excl. Shipping Cost€4.99
- Measures ambient temperature with 0.5°C accuracy
- Temperature range from -40°C to 125°C
- Output in 0.1°C steps (12bit resolution)
-
Incl. 19% Tax, excl. Shipping Cost€8.98
- Four 7-segment displays with switchable colon
- Brightness of segments configurable
- Configurable counter functionality
-
Incl. 19% Tax, excl. Shipping Cost€17.99
- Sends and receives serial data
- Provides RS-232 and UART-TTL interface
- Configurable baudrate, parity, stop bits, word length and flow control
-
Incl. 19% Tax, excl. Shipping Cost€6.99
- 300° rotary potentiometer
- Outputs position from -150° to 150° in 1° steps
-
Incl. 19% Tax, excl. Shipping Cost€6.99
- 1x RGB LED
- 24 bit color resolution
-
Incl. 19% Tax, excl. Shipping Cost€21.99
- Battery-backed real-time clock
- Hundredth of a second time resolution
- Low power consumption in battery mode
-
Incl. 19% Tax, excl. Shipping Cost€10.98
- Creates beeps with configurable frequency of 585Hz to 7100Hz
- Configurable beep duration
- Morse code output supported
-
Incl. 19% Tax, excl. Shipping Cost€19.99
- Black/white OLED
- Size of 1.68cm (0.66") with a resolution of 64x48
-
Incl. 19% Tax, excl. Shipping Cost€9.98
- Capacitive Touch Sensor
- Can handle up to 12 electrodes used as touch locations
- Touch can be detected through a thin layer of glass/plastic/paper
- Size and placement of touch area can be user defined
- Can be used to build custom touch panel
-
Incl. 19% Tax, excl. Shipping Cost€7.49
- 59mm linear potentiometer
- Outputs position from 0% to 100% in 1% steps
-
Incl. 19% Tax, excl. Shipping Cost€7.98
- Measures the reflectivity of a surface
- Can be used to detect/follow lines
- Can be used to measure distances of ca. 0-10mm
-
Incl. 19% Tax, excl. Shipping Cost€22.99
- 20x4 character alphanumeric display
- Switchable blue backlight
- 4 push-buttons
-
Incl. 19% Tax, excl. Shipping Cost€7.98
- 2-axis joystick with push-button
-
Incl. 19% Tax, excl. Shipping Cost€8.98
- 16-channel digital input/output
- Switchable logic voltage 3.3V or 5V*
- Configurable pull-ups and interrupts
-
Incl. 19% Tax, excl. Shipping Cost€14.99
- Precision current sensor, measures currents between 0 and 22.5mA
- Can read out any IEC 60381-1 type 2 and type 3 sensor
- High accuracy (0.15%), resolution (up to 0.172µA) and sample rate (up to 240 SPS)
- It is possible to detect if a sensor is connected/faulty
-
Incl. 19% Tax, excl. Shipping Cost€9.98
- 4 channel digital output
- Input voltages up to 36V
- Galvanically isolated
- Groupable
-
Incl. 19% Tax, excl. Shipping Cost€7.98
- Detects presence of magnetic field
- Counts (dis-)appearances of magnetic fields
- Can be used to read out water/electricity meter
-
Incl. 19% Tax, excl. Shipping Cost€34.99
- Measures dust density between 0 and 500µg/m³
-
Incl. 19% Tax, excl. Shipping Cost€12.99
- Measures color (RGB), color temperature and illuminance (16bit resolution each)
- Equipped with switchable LED for defined illumination and color temperature
-
Incl. 19% Tax, excl. Shipping Cost€12.99
- Sends and receives data through CAN bus
- Configurable baudrate, modes and filters
-
Incl. 19% Tax, excl. Shipping Cost€2.99
- Makes all Bricklet signals available
- Not detected by Bricks
-
Incl. 19% Tax, excl. Shipping Cost€14.99
- Measures air pressure and altitude changes
- Resolution 0.012hPa / 0.1m
- Range 10 to 1200hPa