- Description
- Description
-
Details
The LED Strip Bricklet 2.0 can be used to control LED strips and LED pixels that are equipped with the WS2801, WS2811, WS2812/SK6812 (NeoPixel RGB), SK6812RGBW (NeoPixel RGBW), LPD8806 or APA102 (DotStar) LED driver. It is possible to independently control 2048 RGB or 1536 RGBW LEDs (6144 individual LEDs) over the connected Brick.
The API allows to change all LEDs at the same time with a fixed update rate of up to 100Hz. A possible application can be found in the Starter Kit: Blinkenlights: Video
Note: The maximum update rate depends on type and number of attached LEDs (see here).
Technical Specifications
Property Value Supported LED Drivers WS2801, WS2811, WS2812/SK6812 (NeoPixel RGB), WS2813, WS2815,SK6812RGBW (NeoPixel RGBW), LPD8806 and APA102 (DotStar)Current Consumption 64mW (12.8mA at 5V) Resolution 8bit per LED Maximum Number of LEDs 6144 (2048 RGB or 1536 RGBW LEDs) Maximum Update Rate 100 updates per second Dimensions (W x D x H) 30 x 30 x 12mm (1.18 x 1.18 x 0.47") Weight 8.1g Comes Packaged With
- LED Strip Bricklet 2.0
- Chosen Bricklet Cable
- Chosen Mounting Kit / Case
You may also be interested in the following product(s)
-
RGB LED Strip, 5m, WS2812B (NeoPixel)
€29.99Incl. 19% Tax, excl. Shipping Cost -
RGB LED Button Bricklet
€14.99
-
RGB LED Bricklet 2.0
€7.98
-
Master Brick 3.2
€34.99