Sensors

• Measure power, voltage and current up to 720W/36V/20A
• 1mW, 1mV, 1mA resolution over the whole range
• Bidirectional current measurement (e.g. charge/discharge)
• Configurable averaging and ADC conversion time

Measures UV-A, UV-B and UV index

• Measures temperature with a thermocouple
• Supports B, E, J, K, N, R and T type

• 80x60 pixel thermal imaging camera
• Measurement range -10°C to 450°C
• Uses FLIR Lepton with radiometry and shutter
• High Contrast Image with 8.6Hz and 8 bit resolution (for display)
• Temperature Image with 4.5Hz and 16 bit resolution (for scientific calculations)
• Definable spotmeter with min, max, mean temperature measurement
• Automatic shutter control

• Measures contactless object temperature from -70°C to 380°C
• Configurable emissivity
• Measures ambient temperature from -40°C to 85°C
• Output in 0.1°C steps (16bit resolution)

• Measures ambient temperature with 0.2°C accuracy
• Temperature range from -40°C to 125°C
• Output in 0.01°C steps

• Measures sound pressure level in dB(A/B/C/D/Z) and ITU-R 468
• Measures spectrum with up to 512 bins and up to 80 samples per second
• Frequency range 40Hz to 40960Hz
• Noise floor 30dB, maximum 120dB

• Battery-backed real-time clock
• Hundredth of a second time resolution
• Low power consumption in battery mode

• Measures Particulate Matter concentration
• Measures in µg/m³ for differenz sizes
• Distinguishable particle sizes: PM1.0, PM2.5 and PM10
• Integrated fan for air flow

• Receives data from outdoor weather station and indoor sensors
• Measures Temperature, Humidity, Wind/Gust speed, Wind direction and Rainfall
• Can use up to 255 weather stations/sensors simultaneously

• Can read and write NFC Forum Type 1, 2, 3, 4, 5 and Mifare Classic tags.
• NDEF definitions can be directly read/written with API.
• Supports NFC P2P mode
• Supports card emulation mode
• Range is restricted to 10cm (3.94")

• Capacitive touch sensor
• Can handle up to 12 electrodes used as touch locations
• Touch can be detected through a thin layer of glass/plastic/paper
• Size and placement of touch area can be user defined
• Can be used to build custom touch panels

• Passive Infrared Motion Sensor
• Detects motion in distances of up to 12m (sensitivity configurable)
• High sensing angle (120°)
• Fresnel lens has controllable backlight

• Measures output of load cells
• 24bit ADC for high resolution
• Up to 80 weight measurements per second

• Controls up to 2048 RGB or 1536 RGBW LEDs
• All LEDs can be switched independently
• Update rate of up to 100Hz for each LED possible

• Measures distance and velocity with laser pulses
• Distance range 0-40m, resolution 1cm
• Measurement frequency up to 500Hz

• Supports Pt100 and Pt1000 sensors
• Supports 2-wire, 3-wire and 4-wire type
• Measures temperature with 0.05% accuracy at the full scale of -246 to 849°C
• Resolution of 0.03125°C (15bit), output in 0.01°C steps

• Two inputs that can detect the presence of 230VAC mains voltage
• State LED per input

• Full fledged IMU/AHRS with 9 degrees of freedom (3-axis each: accelerometer, compass, gyroscope)
• No accumulating errors, no gimbal lock!
• Factory calibrated, automatic continuous self-calibration during operation
• Calculates quaternions, linear acceleration, gravity vector as well as independent heading, roll and pitch angles

• Measures relative humidity and temperature
• Output in 0.01%RH / 0.01°C steps (14 bit resolution)
• Internal heater and internal compensation

• Measures magnetic flux density between -7mT and 7mT
• Counter with configurable thresholds, bipolar and unipolar
• Can count with a frequency of up to 10kHz

• Supports GPS, GLONASS and Galileo simultaneously
• Receives movement-, position-, altitude, time data and PPS signal
• Elevation, azimuth and SNR for each GPS/GLONASS/Galileo satellite accessible
• 99 channels, 10Hz update rate
• High sensitivity and accuracy, interference canceller

• Supports GPS and GLONASS simultaneously
• Receives movement-, position-, altitude, time data and PPS signal
• Elevation, azimuth and SNR for each GPS/GLONASS satellite accessible
• 99 channels, 10Hz update rate
• High sensitivity and accuracy, interference canceller

• Enables energy monitoring of mains voltage (120V/230V AC)
• Measures voltage (V), current (A) and energy (Wh)
• Measures real/apparent/reactive power (W/VA/VAR)
• Measures power factor and frequency (Hz)
• Voltage and current waveform are provided

• Measures distances from 30cm to 500cm with ultrasound
• Resolution of 1mm

• Measures distances with IR light
• Sensor can be changed
• Supported range: 4-30cm

• Measures distances with IR light
• Sensor can be changed
• Supported range: 20-150cm

• Measures distances with IR light
• Sensor can be changed
• Supported range: 10-80cm

• 3-axis compass
• Measures heading with resolution of 0.1° and accuracy up to 1°
• Measures magnetic flux density with 0.01µT (Microtesla) resolution
• Update rate of up to 600Hz

• Measures color (RGB), color temperature and illuminance (16bit resolution each)
• Equipped with switchable LED for defined illumination and color temperature

• Measures CO2 concentration from 400 to 10000ppm (parts per million)
• High accuracy of ±30ppm (full-scale) and ±3% (of reading)
• Measures temperature and humidity for compensation
• Ambient air pressure can be applied for additional compensation

• Measures air pressure, temperature and altitude
• Resolution 0.0075hPa / 6.25cm
• Range 260 to 1260hPa

• Measures ambient light up to 64000lux
• Full dynamic range from 0.01lux to 64000lux
• Output in 0.01lux steps (16bit effective resolution)

• Measures IAQ (indoor air quality) index, air pressure, humidity and temperature
• IAQ index and humidity values are temperature compensated
• Configurable temperature compensation for use cases in enclosures