Home /
GPS Bricklet 2.0

GPS Bricklet 2.0

More Views

GPS Bricklet 2.0

€0.00

Incl. 19% Tax, excl. Shipping Cost

Availability: In stock

Supports GPS and GLONASS simultaneously
Receives movement-, position-, altitude, time data and PPS signal
Elevation, azimuth and SNR for each GPS/GLONASS satellite accessible
99 channels, 10Hz update rate
High sensitivity and accuracy, interference canceller

Bricklet*: GPS Bricklet 2.0 +€36.99
Qty:
Bricklet Cable 7p-7p
for Master Brick 3.1, HAT (Zero) Brick and Isolator Bricklet [help?]: Qty:
Mounting Kit / Case: Qty:

* Required Fields

Qty:

Description

Details

The GPS Bricklet 2.0 can be used to extend Bricks by the possibility to determine their position via GPS. Additionally it is possible to receive movement (direction and velocity), altitude (altitude and geodial separation), as well as high precise time/date information and PPS signal.

Current values for elevation, azimuth and SNR for each of the GPS and GLONASS satellites can be read out.

The GPS module is optimized to get a fast fix, has a high input sensitivity (-165dBm) and a update rate of 10Hz suitable for drones or the like. Internal interference canceller rejects RF interference from other devices like Bluetooth or Wi-Fi.

A 25mmx25mm active patch antenna with high gain is permanently attached to the bottom side of the Bricklet and connected by a U.FL connector. You can remove the connector and connect your own external antenna.

A CR1025 coin cell battery is also included. It is used as a battery backup for the last satellite position data. With this information a fix can be obtained faster if the power was lost.

Technical Specifications

Property	Value
GPS Module Chipset	GlobalTop Firefly X1

Sensitivity	-148dBm (Acquisition), -165dBm (Tracking)*
Position Accuracy	3.0m (50% CEP)*
Time to first Fix	< 35s (without battery), < 1s (with battery)*
Update Rate	10Hz

Dimensions (W x D x H)	40 x 35 x 12mm (1.57 x 1.38 x 0.47”)
Weight	20g (with battery and antenna)
Current Consumption	73mA