Software / API Bindings / Ruby / API Reference and Examples / Bricks / RED Brick

Ruby - RED Brick¶

This is the description of the Ruby API bindings for the RED Brick. General information and technical specifications for the RED Brick are summarized in its hardware description.

An installation guide for the Ruby API bindings is part of their general description.

API¶

All functions listed below are thread-safe.

Note

The API documentation for the RED Brick is currently incomplete.

The RED Brick API is meant to be used by the Brick Viewer to implement the offered functionality (getting status information, managing programs etc.). Normal users will not need to use this API, it may only be interesting for power users.

FIXME: explain sessions

The RED Brick API operates on reference counted objects (strings, lists, files, directories, processes and programs) that are identified by their 16bit object ID. Functions that allocate or return an object ID (e.g. #allocate_string and #get_next_directory_entry) increase the reference count of the returned object. If the object is no longer needed then #release_object has to be called to decrease the reference count of the object again. In contrast to allocation and getter functions, the reference count for an object returned by a callback is not increased and #release_object must not be called for such an object in response to a callback.

There are functions (e.g. #get_file_info) that only return valid objects under certain conditions. This conditions are documented for the specific functions. For invalid objects #release_object must not be called.

There are also function (e.g. #set_program_stdio_redirection) that have conditionally unused object parameters. Under which conditions an object parameter is unused is documented for the specific functions. For unused object parameters 0 has to be passed as object ID.

The RED Brick API is more complex then the typical Brick API and requires more elaborate error reporting than the TCP/IP protocol can provide with its 2bit error code. Therefore, almost all functions of the RED Brick API return an 8bit error code. Possible error codes are:

Success = 0
UnknownError = 1
InvalidOperation = 2
OperationAborted = 3
InternalError = 4
UnknownSessionID = 5
NoFreeSessionID = 6
UnknownObjectID = 7
NoFreeObjectID = 8
ObjectIsLocked = 9
NoMoreData = 10
WrongListItemType = 11
ProgramIsPurged = 12
InvalidParameter = 128 (EINVAL)
NoFreeMemory = 129 (ENOMEM)
NoFreeSpace = 130 (ENOSPC)
AccessDenied = 131 (EACCES)
AlreadyExists = 132 (EEXIST)
DoesNotExist = 133 (ENOENT)
Interrupted = 134 (EINTR)
IsDirectory = 135 (EISDIR)
NotADirectory = 136 (ENOTDIR)
WouldBlock = 137 (EWOULDBLOCK)
Overflow = 138 (EOVERFLOW)
BadFileDescriptor = 139 (EBADF)
OutOfRange = 140 (ERANGE)
NameTooLong = 141 (ENAMETOOLONG)
InvalidSeek = 142 (ESPIPE)
NotSupported = 143 (ENOTSUP)
TooManyOpenFiles = 144 (EMFILE)

If a function returns an error code other than Success then its other return values (if any) are invalid and must not be used.

The error code InvalidOperation is returned if the requested operation cannot be performed because the current state of the object does not allow it. For example, trying to append an item to a full list object or trying to undefine an already undefined program.

The error code NotSupported is returned if the requested operation can never be performed. For example, trying to append a list object to itself, trying to get the name of a file object with type Pipe or trying to create a directory non-recursively with more than the last part of the directory name referring to non-existing directories.

String objects store UTF-8 encoded data.

Advanced Functions¶

BrickRED#create_session(lifetime) → [int, int]¶

Parameters:	lifetime – Type: int, Range: [0 to 2³² - 1]
Return Array:	0: error_code – Type: int, Range: See constants 1: session_id – Type: int, Range: [0 to 2¹⁶ - 1]

The following constants are available for this function:

For error_code:

BrickRED::ERROR_CODE_SUCCESS = 0
BrickRED::ERROR_CODE_UNKNOWN_ERROR = 1
BrickRED::ERROR_CODE_INVALID_OPERATION = 2
BrickRED::ERROR_CODE_OPERATION_ABORTED = 3
BrickRED::ERROR_CODE_INTERNAL_ERROR = 4
BrickRED::ERROR_CODE_UNKNOWN_SESSION_ID = 5
BrickRED::ERROR_CODE_NO_FREE_SESSION_ID = 6
BrickRED::ERROR_CODE_UNKNOWN_OBJECT_ID = 7
BrickRED::ERROR_CODE_NO_FREE_OBJECT_ID = 8
BrickRED::ERROR_CODE_OBJECT_IS_LOCKED = 9
BrickRED::ERROR_CODE_NO_MORE_DATA = 10
BrickRED::ERROR_CODE_WRONG_LIST_ITEM_TYPE = 11
BrickRED::ERROR_CODE_PROGRAM_IS_PURGED = 12
BrickRED::ERROR_CODE_INVALID_PARAMETER = 128
BrickRED::ERROR_CODE_NO_FREE_MEMORY = 129
BrickRED::ERROR_CODE_NO_FREE_SPACE = 130
BrickRED::ERROR_CODE_ACCESS_DENIED = 121
BrickRED::ERROR_CODE_ALREADY_EXISTS = 132
BrickRED::ERROR_CODE_DOES_NOT_EXIST = 133
BrickRED::ERROR_CODE_INTERRUPTED = 134
BrickRED::ERROR_CODE_IS_DIRECTORY = 135
BrickRED::ERROR_CODE_NOT_A_DIRECTORY = 136
BrickRED::ERROR_CODE_WOULD_BLOCK = 137
BrickRED::ERROR_CODE_OVERFLOW = 138
BrickRED::ERROR_CODE_BAD_FILE_DESCRIPTOR = 139
BrickRED::ERROR_CODE_OUT_OF_RANGE = 140
BrickRED::ERROR_CODE_NAME_TOO_LONG = 141
BrickRED::ERROR_CODE_INVALID_SEEK = 142
BrickRED::ERROR_CODE_NOT_SUPPORTED = 143
BrickRED::ERROR_CODE_TOO_MANY_OPEN_FILES = 144

BrickRED#expire_session(session_id) → int¶

Parameters:	session_id – Type: int, Range: [0 to 2¹⁶ - 1]
Returns:	error_code – Type: int, Range: See constants

The following constants are available for this function:

For error_code:

BrickRED::ERROR_CODE_SUCCESS = 0
BrickRED::ERROR_CODE_UNKNOWN_ERROR = 1
BrickRED::ERROR_CODE_INVALID_OPERATION = 2
BrickRED::ERROR_CODE_OPERATION_ABORTED = 3
BrickRED::ERROR_CODE_INTERNAL_ERROR = 4
BrickRED::ERROR_CODE_UNKNOWN_SESSION_ID = 5
BrickRED::ERROR_CODE_NO_FREE_SESSION_ID = 6
BrickRED::ERROR_CODE_UNKNOWN_OBJECT_ID = 7
BrickRED::ERROR_CODE_NO_FREE_OBJECT_ID = 8
BrickRED::ERROR_CODE_OBJECT_IS_LOCKED = 9
BrickRED::ERROR_CODE_NO_MORE_DATA = 10
BrickRED::ERROR_CODE_WRONG_LIST_ITEM_TYPE = 11
BrickRED::ERROR_CODE_PROGRAM_IS_PURGED = 12
BrickRED::ERROR_CODE_INVALID_PARAMETER = 128
BrickRED::ERROR_CODE_NO_FREE_MEMORY = 129
BrickRED::ERROR_CODE_NO_FREE_SPACE = 130
BrickRED::ERROR_CODE_ACCESS_DENIED = 121
BrickRED::ERROR_CODE_ALREADY_EXISTS = 132
BrickRED::ERROR_CODE_DOES_NOT_EXIST = 133
BrickRED::ERROR_CODE_INTERRUPTED = 134
BrickRED::ERROR_CODE_IS_DIRECTORY = 135
BrickRED::ERROR_CODE_NOT_A_DIRECTORY = 136
BrickRED::ERROR_CODE_WOULD_BLOCK = 137
BrickRED::ERROR_CODE_OVERFLOW = 138
BrickRED::ERROR_CODE_BAD_FILE_DESCRIPTOR = 139
BrickRED::ERROR_CODE_OUT_OF_RANGE = 140
BrickRED::ERROR_CODE_NAME_TOO_LONG = 141
BrickRED::ERROR_CODE_INVALID_SEEK = 142
BrickRED::ERROR_CODE_NOT_SUPPORTED = 143
BrickRED::ERROR_CODE_TOO_MANY_OPEN_FILES = 144

BrickRED#expire_session_unchecked(session_id) → nil¶

Parameters:	session_id – Type: int, Range: [0 to 2¹⁶ - 1]

BrickRED#keep_session_alive(session_id, lifetime) → int¶

Parameters:	session_id – Type: int, Range: [0 to 2¹⁶ - 1] lifetime – Type: int, Range: [0 to 2³² - 1]
Returns:	error_code – Type: int, Range: See constants

The following constants are available for this function:

For error_code:

BrickRED::ERROR_CODE_SUCCESS = 0
BrickRED::ERROR_CODE_UNKNOWN_ERROR = 1
BrickRED::ERROR_CODE_INVALID_OPERATION = 2
BrickRED::ERROR_CODE_OPERATION_ABORTED = 3
BrickRED::ERROR_CODE_INTERNAL_ERROR = 4
BrickRED::ERROR_CODE_UNKNOWN_SESSION_ID = 5
BrickRED::ERROR_CODE_NO_FREE_SESSION_ID = 6
BrickRED::ERROR_CODE_UNKNOWN_OBJECT_ID = 7
BrickRED::ERROR_CODE_NO_FREE_OBJECT_ID = 8
BrickRED::ERROR_CODE_OBJECT_IS_LOCKED = 9
BrickRED::ERROR_CODE_NO_MORE_DATA = 10
BrickRED::ERROR_CODE_WRONG_LIST_ITEM_TYPE = 11
BrickRED::ERROR_CODE_PROGRAM_IS_PURGED = 12
BrickRED::ERROR_CODE_INVALID_PARAMETER = 128
BrickRED::ERROR_CODE_NO_FREE_MEMORY = 129
BrickRED::ERROR_CODE_NO_FREE_SPACE = 130
BrickRED::ERROR_CODE_ACCESS_DENIED = 121
BrickRED::ERROR_CODE_ALREADY_EXISTS = 132
BrickRED::ERROR_CODE_DOES_NOT_EXIST = 133
BrickRED::ERROR_CODE_INTERRUPTED = 134
BrickRED::ERROR_CODE_IS_DIRECTORY = 135
BrickRED::ERROR_CODE_NOT_A_DIRECTORY = 136
BrickRED::ERROR_CODE_WOULD_BLOCK = 137
BrickRED::ERROR_CODE_OVERFLOW = 138
BrickRED::ERROR_CODE_BAD_FILE_DESCRIPTOR = 139
BrickRED::ERROR_CODE_OUT_OF_RANGE = 140
BrickRED::ERROR_CODE_NAME_TOO_LONG = 141
BrickRED::ERROR_CODE_INVALID_SEEK = 142
BrickRED::ERROR_CODE_NOT_SUPPORTED = 143
BrickRED::ERROR_CODE_TOO_MANY_OPEN_FILES = 144

BrickRED#release_object(object_id, session_id) → int¶

Parameters:	object_id – Type: int, Range: [0 to 2¹⁶ - 1] session_id – Type: int, Range: [0 to 2¹⁶ - 1]
Returns:	error_code – Type: int, Range: See constants

Decreases the reference count of an object by one and returns the resulting error code. If the reference count reaches zero the object gets destroyed.

The following constants are available for this function:

For error_code:

BrickRED::ERROR_CODE_SUCCESS = 0
BrickRED::ERROR_CODE_UNKNOWN_ERROR = 1
BrickRED::ERROR_CODE_INVALID_OPERATION = 2
BrickRED::ERROR_CODE_OPERATION_ABORTED = 3
BrickRED::ERROR_CODE_INTERNAL_ERROR = 4
BrickRED::ERROR_CODE_UNKNOWN_SESSION_ID = 5
BrickRED::ERROR_CODE_NO_FREE_SESSION_ID = 6
BrickRED::ERROR_CODE_UNKNOWN_OBJECT_ID = 7
BrickRED::ERROR_CODE_NO_FREE_OBJECT_ID = 8
BrickRED::ERROR_CODE_OBJECT_IS_LOCKED = 9
BrickRED::ERROR_CODE_NO_MORE_DATA = 10
BrickRED::ERROR_CODE_WRONG_LIST_ITEM_TYPE = 11
BrickRED::ERROR_CODE_PROGRAM_IS_PURGED = 12
BrickRED::ERROR_CODE_INVALID_PARAMETER = 128
BrickRED::ERROR_CODE_NO_FREE_MEMORY = 129
BrickRED::ERROR_CODE_NO_FREE_SPACE = 130
BrickRED::ERROR_CODE_ACCESS_DENIED = 121
BrickRED::ERROR_CODE_ALREADY_EXISTS = 132
BrickRED::ERROR_CODE_DOES_NOT_EXIST = 133
BrickRED::ERROR_CODE_INTERRUPTED = 134
BrickRED::ERROR_CODE_IS_DIRECTORY = 135
BrickRED::ERROR_CODE_NOT_A_DIRECTORY = 136
BrickRED::ERROR_CODE_WOULD_BLOCK = 137
BrickRED::ERROR_CODE_OVERFLOW = 138
BrickRED::ERROR_CODE_BAD_FILE_DESCRIPTOR = 139
BrickRED::ERROR_CODE_OUT_OF_RANGE = 140
BrickRED::ERROR_CODE_NAME_TOO_LONG = 141
BrickRED::ERROR_CODE_INVALID_SEEK = 142
BrickRED::ERROR_CODE_NOT_SUPPORTED = 143
BrickRED::ERROR_CODE_TOO_MANY_OPEN_FILES = 144

BrickRED#release_object_unchecked(object_id, session_id) → nil¶

Parameters:	object_id – Type: int, Range: [0 to 2¹⁶ - 1] session_id – Type: int, Range: [0 to 2¹⁶ - 1]

BrickRED#allocate_string(length_to_reserve, buffer, session_id) → [int, int]¶

Parameters:	length_to_reserve – Type: int, Unit: 1 B, Range: [0 to 2³² - 1] buffer – Type: str, Length: up to 58 session_id – Type: int, Range: [0 to 2¹⁶ - 1]
Return Array:	0: error_code – Type: int, Range: See constants 1: string_id – Type: int, Range: [0 to 2¹⁶ - 1]

Allocates a new string object, reserves length_to_reserve bytes memory for it and sets up to the first 60 bytes. Set length_to_reserve to the length of the string that should be stored in the string object.

Returns the object ID of the new string object and the resulting error code.

The following constants are available for this function:

For error_code:

BrickRED::ERROR_CODE_SUCCESS = 0
BrickRED::ERROR_CODE_UNKNOWN_ERROR = 1
BrickRED::ERROR_CODE_INVALID_OPERATION = 2
BrickRED::ERROR_CODE_OPERATION_ABORTED = 3
BrickRED::ERROR_CODE_INTERNAL_ERROR = 4
BrickRED::ERROR_CODE_UNKNOWN_SESSION_ID = 5
BrickRED::ERROR_CODE_NO_FREE_SESSION_ID = 6
BrickRED::ERROR_CODE_UNKNOWN_OBJECT_ID = 7
BrickRED::ERROR_CODE_NO_FREE_OBJECT_ID = 8
BrickRED::ERROR_CODE_OBJECT_IS_LOCKED = 9
BrickRED::ERROR_CODE_NO_MORE_DATA = 10
BrickRED::ERROR_CODE_WRONG_LIST_ITEM_TYPE = 11
BrickRED::ERROR_CODE_PROGRAM_IS_PURGED = 12
BrickRED::ERROR_CODE_INVALID_PARAMETER = 128
BrickRED::ERROR_CODE_NO_FREE_MEMORY = 129
BrickRED::ERROR_CODE_NO_FREE_SPACE = 130
BrickRED::ERROR_CODE_ACCESS_DENIED = 121
BrickRED::ERROR_CODE_ALREADY_EXISTS = 132
BrickRED::ERROR_CODE_DOES_NOT_EXIST = 133
BrickRED::ERROR_CODE_INTERRUPTED = 134
BrickRED::ERROR_CODE_IS_DIRECTORY = 135
BrickRED::ERROR_CODE_NOT_A_DIRECTORY = 136
BrickRED::ERROR_CODE_WOULD_BLOCK = 137
BrickRED::ERROR_CODE_OVERFLOW = 138
BrickRED::ERROR_CODE_BAD_FILE_DESCRIPTOR = 139
BrickRED::ERROR_CODE_OUT_OF_RANGE = 140
BrickRED::ERROR_CODE_NAME_TOO_LONG = 141
BrickRED::ERROR_CODE_INVALID_SEEK = 142
BrickRED::ERROR_CODE_NOT_SUPPORTED = 143
BrickRED::ERROR_CODE_TOO_MANY_OPEN_FILES = 144

BrickRED#truncate_string(string_id, length) → int¶

Parameters:	string_id – Type: int, Range: [0 to 2¹⁶ - 1] length – Type: int, Unit: 1 B, Range: [0 to 2³² - 1]
Returns:	error_code – Type: int, Range: See constants

Truncates a string object to length bytes and returns the resulting error code.

The following constants are available for this function:

For error_code:

BrickRED::ERROR_CODE_SUCCESS = 0
BrickRED::ERROR_CODE_UNKNOWN_ERROR = 1
BrickRED::ERROR_CODE_INVALID_OPERATION = 2
BrickRED::ERROR_CODE_OPERATION_ABORTED = 3
BrickRED::ERROR_CODE_INTERNAL_ERROR = 4
BrickRED::ERROR_CODE_UNKNOWN_SESSION_ID = 5
BrickRED::ERROR_CODE_NO_FREE_SESSION_ID = 6
BrickRED::ERROR_CODE_UNKNOWN_OBJECT_ID = 7
BrickRED::ERROR_CODE_NO_FREE_OBJECT_ID = 8
BrickRED::ERROR_CODE_OBJECT_IS_LOCKED = 9
BrickRED::ERROR_CODE_NO_MORE_DATA = 10
BrickRED::ERROR_CODE_WRONG_LIST_ITEM_TYPE = 11
BrickRED::ERROR_CODE_PROGRAM_IS_PURGED = 12
BrickRED::ERROR_CODE_INVALID_PARAMETER = 128
BrickRED::ERROR_CODE_NO_FREE_MEMORY = 129
BrickRED::ERROR_CODE_NO_FREE_SPACE = 130
BrickRED::ERROR_CODE_ACCESS_DENIED = 121
BrickRED::ERROR_CODE_ALREADY_EXISTS = 132
BrickRED::ERROR_CODE_DOES_NOT_EXIST = 133
BrickRED::ERROR_CODE_INTERRUPTED = 134
BrickRED::ERROR_CODE_IS_DIRECTORY = 135
BrickRED::ERROR_CODE_NOT_A_DIRECTORY = 136
BrickRED::ERROR_CODE_WOULD_BLOCK = 137
BrickRED::ERROR_CODE_OVERFLOW = 138
BrickRED::ERROR_CODE_BAD_FILE_DESCRIPTOR = 139
BrickRED::ERROR_CODE_OUT_OF_RANGE = 140
BrickRED::ERROR_CODE_NAME_TOO_LONG = 141
BrickRED::ERROR_CODE_INVALID_SEEK = 142
BrickRED::ERROR_CODE_NOT_SUPPORTED = 143
BrickRED::ERROR_CODE_TOO_MANY_OPEN_FILES = 144

BrickRED#get_string_length(string_id) → [int, int]¶

Parameters:	string_id – Type: int, Range: [0 to 2¹⁶ - 1]
Return Array:	0: error_code – Type: int, Range: See constants 1: length – Type: int, Unit: 1 B, Range: [0 to 2³² - 1]

Returns the length of a string object and the resulting error code.

The following constants are available for this function:

For error_code:

BrickRED::ERROR_CODE_SUCCESS = 0
BrickRED::ERROR_CODE_UNKNOWN_ERROR = 1
BrickRED::ERROR_CODE_INVALID_OPERATION = 2
BrickRED::ERROR_CODE_OPERATION_ABORTED = 3
BrickRED::ERROR_CODE_INTERNAL_ERROR = 4
BrickRED::ERROR_CODE_UNKNOWN_SESSION_ID = 5
BrickRED::ERROR_CODE_NO_FREE_SESSION_ID = 6
BrickRED::ERROR_CODE_UNKNOWN_OBJECT_ID = 7
BrickRED::ERROR_CODE_NO_FREE_OBJECT_ID = 8
BrickRED::ERROR_CODE_OBJECT_IS_LOCKED = 9
BrickRED::ERROR_CODE_NO_MORE_DATA = 10
BrickRED::ERROR_CODE_WRONG_LIST_ITEM_TYPE = 11
BrickRED::ERROR_CODE_PROGRAM_IS_PURGED = 12
BrickRED::ERROR_CODE_INVALID_PARAMETER = 128
BrickRED::ERROR_CODE_NO_FREE_MEMORY = 129
BrickRED::ERROR_CODE_NO_FREE_SPACE = 130
BrickRED::ERROR_CODE_ACCESS_DENIED = 121
BrickRED::ERROR_CODE_ALREADY_EXISTS = 132
BrickRED::ERROR_CODE_DOES_NOT_EXIST = 133
BrickRED::ERROR_CODE_INTERRUPTED = 134
BrickRED::ERROR_CODE_IS_DIRECTORY = 135
BrickRED::ERROR_CODE_NOT_A_DIRECTORY = 136
BrickRED::ERROR_CODE_WOULD_BLOCK = 137
BrickRED::ERROR_CODE_OVERFLOW = 138
BrickRED::ERROR_CODE_BAD_FILE_DESCRIPTOR = 139
BrickRED::ERROR_CODE_OUT_OF_RANGE = 140
BrickRED::ERROR_CODE_NAME_TOO_LONG = 141
BrickRED::ERROR_CODE_INVALID_SEEK = 142
BrickRED::ERROR_CODE_NOT_SUPPORTED = 143
BrickRED::ERROR_CODE_TOO_MANY_OPEN_FILES = 144

BrickRED#set_string_chunk(string_id, offset, buffer) → int¶

Parameters:	string_id – Type: int, Range: [0 to 2¹⁶ - 1] offset – Type: int, Unit: 1 B, Range: [0 to 2³² - 1] buffer – Type: str, Length: up to 58
Returns:	error_code – Type: int, Range: See constants

Sets a chunk of up to 58 bytes in a string object beginning at offset.

Returns the resulting error code.

The following constants are available for this function:

For error_code:

BrickRED::ERROR_CODE_SUCCESS = 0
BrickRED::ERROR_CODE_UNKNOWN_ERROR = 1
BrickRED::ERROR_CODE_INVALID_OPERATION = 2
BrickRED::ERROR_CODE_OPERATION_ABORTED = 3
BrickRED::ERROR_CODE_INTERNAL_ERROR = 4
BrickRED::ERROR_CODE_UNKNOWN_SESSION_ID = 5
BrickRED::ERROR_CODE_NO_FREE_SESSION_ID = 6
BrickRED::ERROR_CODE_UNKNOWN_OBJECT_ID = 7
BrickRED::ERROR_CODE_NO_FREE_OBJECT_ID = 8
BrickRED::ERROR_CODE_OBJECT_IS_LOCKED = 9
BrickRED::ERROR_CODE_NO_MORE_DATA = 10
BrickRED::ERROR_CODE_WRONG_LIST_ITEM_TYPE = 11
BrickRED::ERROR_CODE_PROGRAM_IS_PURGED = 12
BrickRED::ERROR_CODE_INVALID_PARAMETER = 128
BrickRED::ERROR_CODE_NO_FREE_MEMORY = 129
BrickRED::ERROR_CODE_NO_FREE_SPACE = 130
BrickRED::ERROR_CODE_ACCESS_DENIED = 121
BrickRED::ERROR_CODE_ALREADY_EXISTS = 132
BrickRED::ERROR_CODE_DOES_NOT_EXIST = 133
BrickRED::ERROR_CODE_INTERRUPTED = 134
BrickRED::ERROR_CODE_IS_DIRECTORY = 135
BrickRED::ERROR_CODE_NOT_A_DIRECTORY = 136
BrickRED::ERROR_CODE_WOULD_BLOCK = 137
BrickRED::ERROR_CODE_OVERFLOW = 138
BrickRED::ERROR_CODE_BAD_FILE_DESCRIPTOR = 139
BrickRED::ERROR_CODE_OUT_OF_RANGE = 140
BrickRED::ERROR_CODE_NAME_TOO_LONG = 141
BrickRED::ERROR_CODE_INVALID_SEEK = 142
BrickRED::ERROR_CODE_NOT_SUPPORTED = 143
BrickRED::ERROR_CODE_TOO_MANY_OPEN_FILES = 144

BrickRED#get_string_chunk(string_id, offset) → [int, str]¶

Parameters:	string_id – Type: int, Range: [0 to 2¹⁶ - 1] offset – Type: int, Unit: 1 B, Range: [0 to 2³² - 1]
Return Array:	0: error_code – Type: int, Range: See constants 1: buffer – Type: str, Length: up to 63

Returns a chunk up to 63 bytes from a string object beginning at offset and returns the resulting error code.

The following constants are available for this function:

For error_code:

BrickRED::ERROR_CODE_SUCCESS = 0
BrickRED::ERROR_CODE_UNKNOWN_ERROR = 1
BrickRED::ERROR_CODE_INVALID_OPERATION = 2
BrickRED::ERROR_CODE_OPERATION_ABORTED = 3
BrickRED::ERROR_CODE_INTERNAL_ERROR = 4
BrickRED::ERROR_CODE_UNKNOWN_SESSION_ID = 5
BrickRED::ERROR_CODE_NO_FREE_SESSION_ID = 6
BrickRED::ERROR_CODE_UNKNOWN_OBJECT_ID = 7
BrickRED::ERROR_CODE_NO_FREE_OBJECT_ID = 8
BrickRED::ERROR_CODE_OBJECT_IS_LOCKED = 9
BrickRED::ERROR_CODE_NO_MORE_DATA = 10
BrickRED::ERROR_CODE_WRONG_LIST_ITEM_TYPE = 11
BrickRED::ERROR_CODE_PROGRAM_IS_PURGED = 12
BrickRED::ERROR_CODE_INVALID_PARAMETER = 128
BrickRED::ERROR_CODE_NO_FREE_MEMORY = 129
BrickRED::ERROR_CODE_NO_FREE_SPACE = 130
BrickRED::ERROR_CODE_ACCESS_DENIED = 121
BrickRED::ERROR_CODE_ALREADY_EXISTS = 132
BrickRED::ERROR_CODE_DOES_NOT_EXIST = 133
BrickRED::ERROR_CODE_INTERRUPTED = 134
BrickRED::ERROR_CODE_IS_DIRECTORY = 135
BrickRED::ERROR_CODE_NOT_A_DIRECTORY = 136
BrickRED::ERROR_CODE_WOULD_BLOCK = 137
BrickRED::ERROR_CODE_OVERFLOW = 138
BrickRED::ERROR_CODE_BAD_FILE_DESCRIPTOR = 139
BrickRED::ERROR_CODE_OUT_OF_RANGE = 140
BrickRED::ERROR_CODE_NAME_TOO_LONG = 141
BrickRED::ERROR_CODE_INVALID_SEEK = 142
BrickRED::ERROR_CODE_NOT_SUPPORTED = 143
BrickRED::ERROR_CODE_TOO_MANY_OPEN_FILES = 144

BrickRED#allocate_list(length_to_reserve, session_id) → [int, int]¶

Parameters:	length_to_reserve – Type: int, Range: [0 to 2¹⁶ - 1] session_id – Type: int, Range: [0 to 2¹⁶ - 1]
Return Array:	0: error_code – Type: int, Range: See constants 1: list_id – Type: int, Range: [0 to 2¹⁶ - 1]

Allocates a new list object and reserves memory for length_to_reserve items. Set length_to_reserve to the number of items that should be stored in the list object.

Returns the object ID of the new list object and the resulting error code.

When a list object gets destroyed then the reference count of each object in the list object is decreased by one.

The following constants are available for this function:

For error_code:

BrickRED::ERROR_CODE_SUCCESS = 0
BrickRED::ERROR_CODE_UNKNOWN_ERROR = 1
BrickRED::ERROR_CODE_INVALID_OPERATION = 2
BrickRED::ERROR_CODE_OPERATION_ABORTED = 3
BrickRED::ERROR_CODE_INTERNAL_ERROR = 4
BrickRED::ERROR_CODE_UNKNOWN_SESSION_ID = 5
BrickRED::ERROR_CODE_NO_FREE_SESSION_ID = 6
BrickRED::ERROR_CODE_UNKNOWN_OBJECT_ID = 7
BrickRED::ERROR_CODE_NO_FREE_OBJECT_ID = 8
BrickRED::ERROR_CODE_OBJECT_IS_LOCKED = 9
BrickRED::ERROR_CODE_NO_MORE_DATA = 10
BrickRED::ERROR_CODE_WRONG_LIST_ITEM_TYPE = 11
BrickRED::ERROR_CODE_PROGRAM_IS_PURGED = 12
BrickRED::ERROR_CODE_INVALID_PARAMETER = 128
BrickRED::ERROR_CODE_NO_FREE_MEMORY = 129
BrickRED::ERROR_CODE_NO_FREE_SPACE = 130
BrickRED::ERROR_CODE_ACCESS_DENIED = 121
BrickRED::ERROR_CODE_ALREADY_EXISTS = 132
BrickRED::ERROR_CODE_DOES_NOT_EXIST = 133
BrickRED::ERROR_CODE_INTERRUPTED = 134
BrickRED::ERROR_CODE_IS_DIRECTORY = 135
BrickRED::ERROR_CODE_NOT_A_DIRECTORY = 136
BrickRED::ERROR_CODE_WOULD_BLOCK = 137
BrickRED::ERROR_CODE_OVERFLOW = 138
BrickRED::ERROR_CODE_BAD_FILE_DESCRIPTOR = 139
BrickRED::ERROR_CODE_OUT_OF_RANGE = 140
BrickRED::ERROR_CODE_NAME_TOO_LONG = 141
BrickRED::ERROR_CODE_INVALID_SEEK = 142
BrickRED::ERROR_CODE_NOT_SUPPORTED = 143
BrickRED::ERROR_CODE_TOO_MANY_OPEN_FILES = 144

BrickRED#get_list_length(list_id) → [int, int]¶

Parameters:	list_id – Type: int, Range: [0 to 2¹⁶ - 1]
Return Array:	0: error_code – Type: int, Range: See constants 1: length – Type: int, Range: [0 to 2¹⁶ - 1]

Returns the length of a list object in items and the resulting error code.

The following constants are available for this function:

For error_code:

BrickRED::ERROR_CODE_SUCCESS = 0
BrickRED::ERROR_CODE_UNKNOWN_ERROR = 1
BrickRED::ERROR_CODE_INVALID_OPERATION = 2
BrickRED::ERROR_CODE_OPERATION_ABORTED = 3
BrickRED::ERROR_CODE_INTERNAL_ERROR = 4
BrickRED::ERROR_CODE_UNKNOWN_SESSION_ID = 5
BrickRED::ERROR_CODE_NO_FREE_SESSION_ID = 6
BrickRED::ERROR_CODE_UNKNOWN_OBJECT_ID = 7
BrickRED::ERROR_CODE_NO_FREE_OBJECT_ID = 8
BrickRED::ERROR_CODE_OBJECT_IS_LOCKED = 9
BrickRED::ERROR_CODE_NO_MORE_DATA = 10
BrickRED::ERROR_CODE_WRONG_LIST_ITEM_TYPE = 11
BrickRED::ERROR_CODE_PROGRAM_IS_PURGED = 12
BrickRED::ERROR_CODE_INVALID_PARAMETER = 128
BrickRED::ERROR_CODE_NO_FREE_MEMORY = 129
BrickRED::ERROR_CODE_NO_FREE_SPACE = 130
BrickRED::ERROR_CODE_ACCESS_DENIED = 121
BrickRED::ERROR_CODE_ALREADY_EXISTS = 132
BrickRED::ERROR_CODE_DOES_NOT_EXIST = 133
BrickRED::ERROR_CODE_INTERRUPTED = 134
BrickRED::ERROR_CODE_IS_DIRECTORY = 135
BrickRED::ERROR_CODE_NOT_A_DIRECTORY = 136
BrickRED::ERROR_CODE_WOULD_BLOCK = 137
BrickRED::ERROR_CODE_OVERFLOW = 138
BrickRED::ERROR_CODE_BAD_FILE_DESCRIPTOR = 139
BrickRED::ERROR_CODE_OUT_OF_RANGE = 140
BrickRED::ERROR_CODE_NAME_TOO_LONG = 141
BrickRED::ERROR_CODE_INVALID_SEEK = 142
BrickRED::ERROR_CODE_NOT_SUPPORTED = 143
BrickRED::ERROR_CODE_TOO_MANY_OPEN_FILES = 144

BrickRED#get_list_item(list_id, index, session_id) → [int, int, int]¶

Parameters:	list_id – Type: int, Range: [0 to 2¹⁶ - 1] index – Type: int, Range: [0 to 2¹⁶ - 1] session_id – Type: int, Range: [0 to 2¹⁶ - 1]
Return Array:	0: error_code – Type: int, Range: See constants 1: item_object_id – Type: int, Range: [0 to 2¹⁶ - 1] 2: type – Type: int, Range: See constants

Returns the object ID and type of the object stored at index in a list object and returns the resulting error code.

Possible object types are:

String = 0
List = 1
File = 2
Directory = 3
Process = 4
Program = 5

The following constants are available for this function:

For error_code:

BrickRED::ERROR_CODE_SUCCESS = 0
BrickRED::ERROR_CODE_UNKNOWN_ERROR = 1
BrickRED::ERROR_CODE_INVALID_OPERATION = 2
BrickRED::ERROR_CODE_OPERATION_ABORTED = 3
BrickRED::ERROR_CODE_INTERNAL_ERROR = 4
BrickRED::ERROR_CODE_UNKNOWN_SESSION_ID = 5
BrickRED::ERROR_CODE_NO_FREE_SESSION_ID = 6
BrickRED::ERROR_CODE_UNKNOWN_OBJECT_ID = 7
BrickRED::ERROR_CODE_NO_FREE_OBJECT_ID = 8
BrickRED::ERROR_CODE_OBJECT_IS_LOCKED = 9
BrickRED::ERROR_CODE_NO_MORE_DATA = 10
BrickRED::ERROR_CODE_WRONG_LIST_ITEM_TYPE = 11
BrickRED::ERROR_CODE_PROGRAM_IS_PURGED = 12
BrickRED::ERROR_CODE_INVALID_PARAMETER = 128
BrickRED::ERROR_CODE_NO_FREE_MEMORY = 129
BrickRED::ERROR_CODE_NO_FREE_SPACE = 130
BrickRED::ERROR_CODE_ACCESS_DENIED = 121
BrickRED::ERROR_CODE_ALREADY_EXISTS = 132
BrickRED::ERROR_CODE_DOES_NOT_EXIST = 133
BrickRED::ERROR_CODE_INTERRUPTED = 134
BrickRED::ERROR_CODE_IS_DIRECTORY = 135
BrickRED::ERROR_CODE_NOT_A_DIRECTORY = 136
BrickRED::ERROR_CODE_WOULD_BLOCK = 137
BrickRED::ERROR_CODE_OVERFLOW = 138
BrickRED::ERROR_CODE_BAD_FILE_DESCRIPTOR = 139
BrickRED::ERROR_CODE_OUT_OF_RANGE = 140
BrickRED::ERROR_CODE_NAME_TOO_LONG = 141
BrickRED::ERROR_CODE_INVALID_SEEK = 142
BrickRED::ERROR_CODE_NOT_SUPPORTED = 143
BrickRED::ERROR_CODE_TOO_MANY_OPEN_FILES = 144

For type:

BrickRED::OBJECT_TYPE_STRING = 0
BrickRED::OBJECT_TYPE_LIST = 1
BrickRED::OBJECT_TYPE_FILE = 2
BrickRED::OBJECT_TYPE_DIRECTORY = 3
BrickRED::OBJECT_TYPE_PROCESS = 4
BrickRED::OBJECT_TYPE_PROGRAM = 5

BrickRED#append_to_list(list_id, item_object_id) → int¶

Parameters:	list_id – Type: int, Range: [0 to 2¹⁶ - 1] item_object_id – Type: int, Range: [0 to 2¹⁶ - 1]
Returns:	error_code – Type: int, Range: See constants

Appends an object to a list object and increases the reference count of the appended object by one.

Returns the resulting error code.

The following constants are available for this function:

For error_code:

BrickRED::ERROR_CODE_SUCCESS = 0
BrickRED::ERROR_CODE_UNKNOWN_ERROR = 1
BrickRED::ERROR_CODE_INVALID_OPERATION = 2
BrickRED::ERROR_CODE_OPERATION_ABORTED = 3
BrickRED::ERROR_CODE_INTERNAL_ERROR = 4
BrickRED::ERROR_CODE_UNKNOWN_SESSION_ID = 5
BrickRED::ERROR_CODE_NO_FREE_SESSION_ID = 6
BrickRED::ERROR_CODE_UNKNOWN_OBJECT_ID = 7
BrickRED::ERROR_CODE_NO_FREE_OBJECT_ID = 8
BrickRED::ERROR_CODE_OBJECT_IS_LOCKED = 9
BrickRED::ERROR_CODE_NO_MORE_DATA = 10
BrickRED::ERROR_CODE_WRONG_LIST_ITEM_TYPE = 11
BrickRED::ERROR_CODE_PROGRAM_IS_PURGED = 12
BrickRED::ERROR_CODE_INVALID_PARAMETER = 128
BrickRED::ERROR_CODE_NO_FREE_MEMORY = 129
BrickRED::ERROR_CODE_NO_FREE_SPACE = 130
BrickRED::ERROR_CODE_ACCESS_DENIED = 121
BrickRED::ERROR_CODE_ALREADY_EXISTS = 132
BrickRED::ERROR_CODE_DOES_NOT_EXIST = 133
BrickRED::ERROR_CODE_INTERRUPTED = 134
BrickRED::ERROR_CODE_IS_DIRECTORY = 135
BrickRED::ERROR_CODE_NOT_A_DIRECTORY = 136
BrickRED::ERROR_CODE_WOULD_BLOCK = 137
BrickRED::ERROR_CODE_OVERFLOW = 138
BrickRED::ERROR_CODE_BAD_FILE_DESCRIPTOR = 139
BrickRED::ERROR_CODE_OUT_OF_RANGE = 140
BrickRED::ERROR_CODE_NAME_TOO_LONG = 141
BrickRED::ERROR_CODE_INVALID_SEEK = 142
BrickRED::ERROR_CODE_NOT_SUPPORTED = 143
BrickRED::ERROR_CODE_TOO_MANY_OPEN_FILES = 144

BrickRED#remove_from_list(list_id, index) → int¶

Parameters:	list_id – Type: int, Range: [0 to 2¹⁶ - 1] index – Type: int, Range: [0 to 2¹⁶ - 1]
Returns:	error_code – Type: int, Range: See constants

Removes the object stored at index from a list object and decreases the reference count of the removed object by one.

Returns the resulting error code.

The following constants are available for this function:

For error_code:

BrickRED::ERROR_CODE_SUCCESS = 0
BrickRED::ERROR_CODE_UNKNOWN_ERROR = 1
BrickRED::ERROR_CODE_INVALID_OPERATION = 2
BrickRED::ERROR_CODE_OPERATION_ABORTED = 3
BrickRED::ERROR_CODE_INTERNAL_ERROR = 4
BrickRED::ERROR_CODE_UNKNOWN_SESSION_ID = 5
BrickRED::ERROR_CODE_NO_FREE_SESSION_ID = 6
BrickRED::ERROR_CODE_UNKNOWN_OBJECT_ID = 7
BrickRED::ERROR_CODE_NO_FREE_OBJECT_ID = 8
BrickRED::ERROR_CODE_OBJECT_IS_LOCKED = 9
BrickRED::ERROR_CODE_NO_MORE_DATA = 10
BrickRED::ERROR_CODE_WRONG_LIST_ITEM_TYPE = 11
BrickRED::ERROR_CODE_PROGRAM_IS_PURGED = 12
BrickRED::ERROR_CODE_INVALID_PARAMETER = 128
BrickRED::ERROR_CODE_NO_FREE_MEMORY = 129
BrickRED::ERROR_CODE_NO_FREE_SPACE = 130
BrickRED::ERROR_CODE_ACCESS_DENIED = 121
BrickRED::ERROR_CODE_ALREADY_EXISTS = 132
BrickRED::ERROR_CODE_DOES_NOT_EXIST = 133
BrickRED::ERROR_CODE_INTERRUPTED = 134
BrickRED::ERROR_CODE_IS_DIRECTORY = 135
BrickRED::ERROR_CODE_NOT_A_DIRECTORY = 136
BrickRED::ERROR_CODE_WOULD_BLOCK = 137
BrickRED::ERROR_CODE_OVERFLOW = 138
BrickRED::ERROR_CODE_BAD_FILE_DESCRIPTOR = 139
BrickRED::ERROR_CODE_OUT_OF_RANGE = 140
BrickRED::ERROR_CODE_NAME_TOO_LONG = 141
BrickRED::ERROR_CODE_INVALID_SEEK = 142
BrickRED::ERROR_CODE_NOT_SUPPORTED = 143
BrickRED::ERROR_CODE_TOO_MANY_OPEN_FILES = 144

BrickRED#open_file(name_string_id, flags, permissions, uid, gid, session_id) → [int, int]¶

Parameters:	name_string_id – Type: int, Range: [0 to 2¹⁶ - 1] flags – Type: int, Range: See constants permissions – Type: int, Range: See constants uid – Type: int, Range: [0 to 2³² - 1] gid – Type: int, Range: [0 to 2³² - 1] session_id – Type: int, Range: [0 to 2¹⁶ - 1]
Return Array:	0: error_code – Type: int, Range: See constants 1: file_id – Type: int, Range: [0 to 2¹⁶ - 1]

Opens an existing file or creates a new file and allocates a new file object for it.

FIXME: name has to be absolute

The reference count of the name string object is increased by one. When the file object gets destroyed then the reference count of the name string object is decreased by one. Also the name string object is locked and cannot be modified while the file object holds a reference to it.

The flags parameter takes a ORed combination of the following possible file flags (in hexadecimal notation):

ReadOnly = 0x0001 (O_RDONLY)
WriteOnly = 0x0002 (O_WRONLY)
ReadWrite = 0x0004 (O_RDWR)
Append = 0x0008 (O_APPEND)
Create = 0x0010 (O_CREAT)
Exclusive = 0x0020 (O_EXCL)
NonBlocking = 0x0040 (O_NONBLOCK)
Truncate = 0x0080 (O_TRUNC)
Temporary = 0x0100
Replace = 0x0200

FIXME: explain Temporary and Replace flag

The permissions parameter takes a ORed combination of the following possible file permissions (in octal notation) that match the common UNIX permission bits:

UserRead = 00400
UserWrite = 00200
UserExecute = 00100
GroupRead = 00040
GroupWrite = 00020
GroupExecute = 00010
OthersRead = 00004
OthersWrite = 00002
OthersExecute = 00001

Returns the object ID of the new file object and the resulting error code.

The following constants are available for this function:

For flags:

BrickRED::FILE_FLAG_READ_ONLY = 1
BrickRED::FILE_FLAG_WRITE_ONLY = 2
BrickRED::FILE_FLAG_READ_WRITE = 4
BrickRED::FILE_FLAG_APPEND = 8
BrickRED::FILE_FLAG_CREATE = 16
BrickRED::FILE_FLAG_EXCLUSIVE = 32
BrickRED::FILE_FLAG_NON_BLOCKING = 64
BrickRED::FILE_FLAG_TRUNCATE = 128
BrickRED::FILE_FLAG_TEMPORARY = 256
BrickRED::FILE_FLAG_REPLACE = 512

For permissions:

BrickRED::FILE_PERMISSION_USER_ALL = 448
BrickRED::FILE_PERMISSION_USER_READ = 256
BrickRED::FILE_PERMISSION_USER_WRITE = 128
BrickRED::FILE_PERMISSION_USER_EXECUTE = 64
BrickRED::FILE_PERMISSION_GROUP_ALL = 56
BrickRED::FILE_PERMISSION_GROUP_READ = 32
BrickRED::FILE_PERMISSION_GROUP_WRITE = 16
BrickRED::FILE_PERMISSION_GROUP_EXECUTE = 8
BrickRED::FILE_PERMISSION_OTHERS_ALL = 7
BrickRED::FILE_PERMISSION_OTHERS_READ = 4
BrickRED::FILE_PERMISSION_OTHERS_WRITE = 2
BrickRED::FILE_PERMISSION_OTHERS_EXECUTE = 1

For error_code:

BrickRED::ERROR_CODE_SUCCESS = 0
BrickRED::ERROR_CODE_UNKNOWN_ERROR = 1
BrickRED::ERROR_CODE_INVALID_OPERATION = 2
BrickRED::ERROR_CODE_OPERATION_ABORTED = 3
BrickRED::ERROR_CODE_INTERNAL_ERROR = 4
BrickRED::ERROR_CODE_UNKNOWN_SESSION_ID = 5
BrickRED::ERROR_CODE_NO_FREE_SESSION_ID = 6
BrickRED::ERROR_CODE_UNKNOWN_OBJECT_ID = 7
BrickRED::ERROR_CODE_NO_FREE_OBJECT_ID = 8
BrickRED::ERROR_CODE_OBJECT_IS_LOCKED = 9
BrickRED::ERROR_CODE_NO_MORE_DATA = 10
BrickRED::ERROR_CODE_WRONG_LIST_ITEM_TYPE = 11
BrickRED::ERROR_CODE_PROGRAM_IS_PURGED = 12
BrickRED::ERROR_CODE_INVALID_PARAMETER = 128
BrickRED::ERROR_CODE_NO_FREE_MEMORY = 129
BrickRED::ERROR_CODE_NO_FREE_SPACE = 130
BrickRED::ERROR_CODE_ACCESS_DENIED = 121
BrickRED::ERROR_CODE_ALREADY_EXISTS = 132
BrickRED::ERROR_CODE_DOES_NOT_EXIST = 133
BrickRED::ERROR_CODE_INTERRUPTED = 134
BrickRED::ERROR_CODE_IS_DIRECTORY = 135
BrickRED::ERROR_CODE_NOT_A_DIRECTORY = 136
BrickRED::ERROR_CODE_WOULD_BLOCK = 137
BrickRED::ERROR_CODE_OVERFLOW = 138
BrickRED::ERROR_CODE_BAD_FILE_DESCRIPTOR = 139
BrickRED::ERROR_CODE_OUT_OF_RANGE = 140
BrickRED::ERROR_CODE_NAME_TOO_LONG = 141
BrickRED::ERROR_CODE_INVALID_SEEK = 142
BrickRED::ERROR_CODE_NOT_SUPPORTED = 143
BrickRED::ERROR_CODE_TOO_MANY_OPEN_FILES = 144

BrickRED#create_pipe(flags, length, session_id) → [int, int]¶

Parameters:	flags – Type: int, Range: See constants length – Type: int, Unit: 1 B, Range: [0 to 2⁶⁴ - 1] session_id – Type: int, Range: [0 to 2¹⁶ - 1]
Return Array:	0: error_code – Type: int, Range: See constants 1: file_id – Type: int, Range: [0 to 2¹⁶ - 1]

Creates a new pipe and allocates a new file object for it.

The flags parameter takes a ORed combination of the following possible pipe flags (in hexadecimal notation):

NonBlockingRead = 0x0001
NonBlockingWrite = 0x0002

The length of the pipe buffer can be specified with the length parameter in bytes. If length is set to zero, then the default pipe buffer length is used.

Returns the object ID of the new file object and the resulting error code.

The following constants are available for this function:

For flags:

BrickRED::PIPE_FLAG_NON_BLOCKING_READ = 1
BrickRED::PIPE_FLAG_NON_BLOCKING_WRITE = 2

For error_code:

BrickRED::ERROR_CODE_SUCCESS = 0
BrickRED::ERROR_CODE_UNKNOWN_ERROR = 1
BrickRED::ERROR_CODE_INVALID_OPERATION = 2
BrickRED::ERROR_CODE_OPERATION_ABORTED = 3
BrickRED::ERROR_CODE_INTERNAL_ERROR = 4
BrickRED::ERROR_CODE_UNKNOWN_SESSION_ID = 5
BrickRED::ERROR_CODE_NO_FREE_SESSION_ID = 6
BrickRED::ERROR_CODE_UNKNOWN_OBJECT_ID = 7
BrickRED::ERROR_CODE_NO_FREE_OBJECT_ID = 8
BrickRED::ERROR_CODE_OBJECT_IS_LOCKED = 9
BrickRED::ERROR_CODE_NO_MORE_DATA = 10
BrickRED::ERROR_CODE_WRONG_LIST_ITEM_TYPE = 11
BrickRED::ERROR_CODE_PROGRAM_IS_PURGED = 12
BrickRED::ERROR_CODE_INVALID_PARAMETER = 128
BrickRED::ERROR_CODE_NO_FREE_MEMORY = 129
BrickRED::ERROR_CODE_NO_FREE_SPACE = 130
BrickRED::ERROR_CODE_ACCESS_DENIED = 121
BrickRED::ERROR_CODE_ALREADY_EXISTS = 132
BrickRED::ERROR_CODE_DOES_NOT_EXIST = 133
BrickRED::ERROR_CODE_INTERRUPTED = 134
BrickRED::ERROR_CODE_IS_DIRECTORY = 135
BrickRED::ERROR_CODE_NOT_A_DIRECTORY = 136
BrickRED::ERROR_CODE_WOULD_BLOCK = 137
BrickRED::ERROR_CODE_OVERFLOW = 138
BrickRED::ERROR_CODE_BAD_FILE_DESCRIPTOR = 139
BrickRED::ERROR_CODE_OUT_OF_RANGE = 140
BrickRED::ERROR_CODE_NAME_TOO_LONG = 141
BrickRED::ERROR_CODE_INVALID_SEEK = 142
BrickRED::ERROR_CODE_NOT_SUPPORTED = 143
BrickRED::ERROR_CODE_TOO_MANY_OPEN_FILES = 144

BrickRED#get_file_info(file_id, session_id) → [int, int, int, int, int, int, int, int, int, int, int]¶

Parameters:

Parameters:	file_id – Type: int, Range: [0 to 2¹⁶ - 1] session_id – Type: int, Range: [0 to 2¹⁶ - 1]
Return Array:	0: error_code – Type: int, Range: See constants 1: type – Type: int, Range: See constants 2: name_string_id – Type: int, Range: [0 to 2¹⁶ - 1] 3: flags – Type: int, Range: See constants 4: permissions – Type: int, Range: See constants 5: uid – Type: int, Range: [0 to 2³² - 1] 6: gid – Type: int, Range: [0 to 2³² - 1] 7: length – Type: int, Unit: 1 B, Range: [0 to 2⁶⁴ - 1] 8: access_timestamp – Type: int, Range: [0 to 2⁶⁴ - 1] 9: modification_timestamp – Type: int, Range: [0 to 2⁶⁴ - 1] 10: status_change_timestamp – Type: int, Range: [0 to 2⁶⁴ - 1]

file_id – Type: int, Range: [0 to 2¹⁶ - 1]
session_id – Type: int, Range: [0 to 2¹⁶ - 1]

Return Array:

0: error_code – Type: int, Range: See constants
1: type – Type: int, Range: See constants
2: name_string_id – Type: int, Range: [0 to 2¹⁶ - 1]
3: flags – Type: int, Range: See constants
4: permissions – Type: int, Range: See constants
5: uid – Type: int, Range: [0 to 2³² - 1]
6: gid – Type: int, Range: [0 to 2³² - 1]
7: length – Type: int, Unit: 1 B, Range: [0 to 2⁶⁴ - 1]
8: access_timestamp – Type: int, Range: [0 to 2⁶⁴ - 1]
9: modification_timestamp – Type: int, Range: [0 to 2⁶⁴ - 1]
10: status_change_timestamp – Type: int, Range: [0 to 2⁶⁴ - 1]

Returns various information about a file and the resulting error code.

Possible file types are:

Unknown = 0
Regular = 1
Directory = 2
Character = 3
Block = 4
FIFO = 5
Symlink = 6
Socket = 7
Pipe = 8

If the file type is Pipe then the returned name string object is invalid, because a pipe has no name. Otherwise the returned name string object was used to open or create the file object, as passed to #open_file.

The returned flags were used to open or create the file object, as passed to #open_file or #create_pipe. See the respective function for a list of possible file and pipe flags.

FIXME: everything except flags and length is invalid if file type is Pipe

The following constants are available for this function:

For error_code:

BrickRED::ERROR_CODE_SUCCESS = 0
BrickRED::ERROR_CODE_UNKNOWN_ERROR = 1
BrickRED::ERROR_CODE_INVALID_OPERATION = 2
BrickRED::ERROR_CODE_OPERATION_ABORTED = 3
BrickRED::ERROR_CODE_INTERNAL_ERROR = 4
BrickRED::ERROR_CODE_UNKNOWN_SESSION_ID = 5
BrickRED::ERROR_CODE_NO_FREE_SESSION_ID = 6
BrickRED::ERROR_CODE_UNKNOWN_OBJECT_ID = 7
BrickRED::ERROR_CODE_NO_FREE_OBJECT_ID = 8
BrickRED::ERROR_CODE_OBJECT_IS_LOCKED = 9
BrickRED::ERROR_CODE_NO_MORE_DATA = 10
BrickRED::ERROR_CODE_WRONG_LIST_ITEM_TYPE = 11
BrickRED::ERROR_CODE_PROGRAM_IS_PURGED = 12
BrickRED::ERROR_CODE_INVALID_PARAMETER = 128
BrickRED::ERROR_CODE_NO_FREE_MEMORY = 129
BrickRED::ERROR_CODE_NO_FREE_SPACE = 130
BrickRED::ERROR_CODE_ACCESS_DENIED = 121
BrickRED::ERROR_CODE_ALREADY_EXISTS = 132
BrickRED::ERROR_CODE_DOES_NOT_EXIST = 133
BrickRED::ERROR_CODE_INTERRUPTED = 134
BrickRED::ERROR_CODE_IS_DIRECTORY = 135
BrickRED::ERROR_CODE_NOT_A_DIRECTORY = 136
BrickRED::ERROR_CODE_WOULD_BLOCK = 137
BrickRED::ERROR_CODE_OVERFLOW = 138
BrickRED::ERROR_CODE_BAD_FILE_DESCRIPTOR = 139
BrickRED::ERROR_CODE_OUT_OF_RANGE = 140
BrickRED::ERROR_CODE_NAME_TOO_LONG = 141
BrickRED::ERROR_CODE_INVALID_SEEK = 142
BrickRED::ERROR_CODE_NOT_SUPPORTED = 143
BrickRED::ERROR_CODE_TOO_MANY_OPEN_FILES = 144

For type:

BrickRED::FILE_TYPE_UNKNOWN = 0
BrickRED::FILE_TYPE_REGULAR = 1
BrickRED::FILE_TYPE_DIRECTORY = 2
BrickRED::FILE_TYPE_CHARACTER = 3
BrickRED::FILE_TYPE_BLOCK = 4
BrickRED::FILE_TYPE_FIFO = 5
BrickRED::FILE_TYPE_SYMLINK = 6
BrickRED::FILE_TYPE_SOCKET = 7
BrickRED::FILE_TYPE_PIPE = 8

For flags:

BrickRED::FILE_FLAG_READ_ONLY = 1
BrickRED::FILE_FLAG_WRITE_ONLY = 2
BrickRED::FILE_FLAG_READ_WRITE = 4
BrickRED::FILE_FLAG_APPEND = 8
BrickRED::FILE_FLAG_CREATE = 16
BrickRED::FILE_FLAG_EXCLUSIVE = 32
BrickRED::FILE_FLAG_NON_BLOCKING = 64
BrickRED::FILE_FLAG_TRUNCATE = 128
BrickRED::FILE_FLAG_TEMPORARY = 256
BrickRED::FILE_FLAG_REPLACE = 512

For permissions:

BrickRED::FILE_PERMISSION_USER_ALL = 448
BrickRED::FILE_PERMISSION_USER_READ = 256
BrickRED::FILE_PERMISSION_USER_WRITE = 128
BrickRED::FILE_PERMISSION_USER_EXECUTE = 64
BrickRED::FILE_PERMISSION_GROUP_ALL = 56
BrickRED::FILE_PERMISSION_GROUP_READ = 32
BrickRED::FILE_PERMISSION_GROUP_WRITE = 16
BrickRED::FILE_PERMISSION_GROUP_EXECUTE = 8
BrickRED::FILE_PERMISSION_OTHERS_ALL = 7
BrickRED::FILE_PERMISSION_OTHERS_READ = 4
BrickRED::FILE_PERMISSION_OTHERS_WRITE = 2
BrickRED::FILE_PERMISSION_OTHERS_EXECUTE = 1

BrickRED#read_file(file_id, length_to_read) → [int, [int, ...], int]¶

Parameters:	file_id – Type: int, Range: [0 to 2¹⁶ - 1] length_to_read – Type: int, Unit: 1 B, Range: [0 to 255]
Return Array:	0: error_code – Type: int, Range: See constants 1: buffer – Type: [int, ...], Length: 62, Range: [0 to 255] 2: length_read – Type: int, Unit: 1 B, Range: [0 to 255]

Reads up to 62 bytes from a file object.

Returns the bytes read, the actual number of bytes read and the resulting error code.

If there is not data to be read, either because the file position reached end-of-file or because there is not data in the pipe, then zero bytes are returned.

If the file object was created by #open_file without the NonBlocking flag or by #create_pipe without the NonBlockingRead flag then the error code NotSupported is returned.

The following constants are available for this function:

For error_code:

BrickRED::ERROR_CODE_SUCCESS = 0
BrickRED::ERROR_CODE_UNKNOWN_ERROR = 1
BrickRED::ERROR_CODE_INVALID_OPERATION = 2
BrickRED::ERROR_CODE_OPERATION_ABORTED = 3
BrickRED::ERROR_CODE_INTERNAL_ERROR = 4
BrickRED::ERROR_CODE_UNKNOWN_SESSION_ID = 5
BrickRED::ERROR_CODE_NO_FREE_SESSION_ID = 6
BrickRED::ERROR_CODE_UNKNOWN_OBJECT_ID = 7
BrickRED::ERROR_CODE_NO_FREE_OBJECT_ID = 8
BrickRED::ERROR_CODE_OBJECT_IS_LOCKED = 9
BrickRED::ERROR_CODE_NO_MORE_DATA = 10
BrickRED::ERROR_CODE_WRONG_LIST_ITEM_TYPE = 11
BrickRED::ERROR_CODE_PROGRAM_IS_PURGED = 12
BrickRED::ERROR_CODE_INVALID_PARAMETER = 128
BrickRED::ERROR_CODE_NO_FREE_MEMORY = 129
BrickRED::ERROR_CODE_NO_FREE_SPACE = 130
BrickRED::ERROR_CODE_ACCESS_DENIED = 121
BrickRED::ERROR_CODE_ALREADY_EXISTS = 132
BrickRED::ERROR_CODE_DOES_NOT_EXIST = 133
BrickRED::ERROR_CODE_INTERRUPTED = 134
BrickRED::ERROR_CODE_IS_DIRECTORY = 135
BrickRED::ERROR_CODE_NOT_A_DIRECTORY = 136
BrickRED::ERROR_CODE_WOULD_BLOCK = 137
BrickRED::ERROR_CODE_OVERFLOW = 138
BrickRED::ERROR_CODE_BAD_FILE_DESCRIPTOR = 139
BrickRED::ERROR_CODE_OUT_OF_RANGE = 140
BrickRED::ERROR_CODE_NAME_TOO_LONG = 141
BrickRED::ERROR_CODE_INVALID_SEEK = 142
BrickRED::ERROR_CODE_NOT_SUPPORTED = 143
BrickRED::ERROR_CODE_TOO_MANY_OPEN_FILES = 144

BrickRED#read_file_async(file_id, length_to_read) → nil¶

Parameters:	file_id – Type: int, Range: [0 to 2¹⁶ - 1] length_to_read – Type: int, Unit: 1 B, Range: [0 to 2⁶⁴ - 1]

Reads up to 2⁶³ - 1 bytes from a file object asynchronously.

Reports the bytes read (in 60 byte chunks), the actual number of bytes read and the resulting error code via the ::CALLBACK_ASYNC_FILE_READ callback.

If there is not data to be read, either because the file position reached end-of-file or because there is not data in the pipe, then zero bytes are reported.

If the file object was created by #open_file without the NonBlocking flag or by #create_pipe without the NonBlockingRead flag then the error code NotSupported is reported via the ::CALLBACK_ASYNC_FILE_READ callback.

BrickRED#abort_async_file_read(file_id) → int¶

Parameters:	file_id – Type: int, Range: [0 to 2¹⁶ - 1]
Returns:	error_code – Type: int, Range: See constants

Aborts a #read_file_async operation in progress.

Returns the resulting error code.

On success the ::CALLBACK_ASYNC_FILE_READ callback will report OperationAborted.

The following constants are available for this function:

For error_code:

BrickRED::ERROR_CODE_SUCCESS = 0
BrickRED::ERROR_CODE_UNKNOWN_ERROR = 1
BrickRED::ERROR_CODE_INVALID_OPERATION = 2
BrickRED::ERROR_CODE_OPERATION_ABORTED = 3
BrickRED::ERROR_CODE_INTERNAL_ERROR = 4
BrickRED::ERROR_CODE_UNKNOWN_SESSION_ID = 5
BrickRED::ERROR_CODE_NO_FREE_SESSION_ID = 6
BrickRED::ERROR_CODE_UNKNOWN_OBJECT_ID = 7
BrickRED::ERROR_CODE_NO_FREE_OBJECT_ID = 8
BrickRED::ERROR_CODE_OBJECT_IS_LOCKED = 9
BrickRED::ERROR_CODE_NO_MORE_DATA = 10
BrickRED::ERROR_CODE_WRONG_LIST_ITEM_TYPE = 11
BrickRED::ERROR_CODE_PROGRAM_IS_PURGED = 12
BrickRED::ERROR_CODE_INVALID_PARAMETER = 128
BrickRED::ERROR_CODE_NO_FREE_MEMORY = 129
BrickRED::ERROR_CODE_NO_FREE_SPACE = 130
BrickRED::ERROR_CODE_ACCESS_DENIED = 121
BrickRED::ERROR_CODE_ALREADY_EXISTS = 132
BrickRED::ERROR_CODE_DOES_NOT_EXIST = 133
BrickRED::ERROR_CODE_INTERRUPTED = 134
BrickRED::ERROR_CODE_IS_DIRECTORY = 135
BrickRED::ERROR_CODE_NOT_A_DIRECTORY = 136
BrickRED::ERROR_CODE_WOULD_BLOCK = 137
BrickRED::ERROR_CODE_OVERFLOW = 138
BrickRED::ERROR_CODE_BAD_FILE_DESCRIPTOR = 139
BrickRED::ERROR_CODE_OUT_OF_RANGE = 140
BrickRED::ERROR_CODE_NAME_TOO_LONG = 141
BrickRED::ERROR_CODE_INVALID_SEEK = 142
BrickRED::ERROR_CODE_NOT_SUPPORTED = 143
BrickRED::ERROR_CODE_TOO_MANY_OPEN_FILES = 144

BrickRED#write_file(file_id, buffer, length_to_write) → [int, int]¶

Parameters:	file_id – Type: int, Range: [0 to 2¹⁶ - 1] buffer – Type: [int, ...], Length: 61, Range: [0 to 255] length_to_write – Type: int, Unit: 1 B, Range: [0 to 255]
Return Array:	0: error_code – Type: int, Range: See constants 1: length_written – Type: int, Unit: 1 B, Range: [0 to 255]

Writes up to 61 bytes to a file object.

Returns the actual number of bytes written and the resulting error code.

If the file object was created by #open_file without the NonBlocking flag or by #create_pipe without the NonBlockingWrite flag then the error code NotSupported is returned.

The following constants are available for this function:

For error_code:

BrickRED::ERROR_CODE_SUCCESS = 0
BrickRED::ERROR_CODE_UNKNOWN_ERROR = 1
BrickRED::ERROR_CODE_INVALID_OPERATION = 2
BrickRED::ERROR_CODE_OPERATION_ABORTED = 3
BrickRED::ERROR_CODE_INTERNAL_ERROR = 4
BrickRED::ERROR_CODE_UNKNOWN_SESSION_ID = 5
BrickRED::ERROR_CODE_NO_FREE_SESSION_ID = 6
BrickRED::ERROR_CODE_UNKNOWN_OBJECT_ID = 7
BrickRED::ERROR_CODE_NO_FREE_OBJECT_ID = 8
BrickRED::ERROR_CODE_OBJECT_IS_LOCKED = 9
BrickRED::ERROR_CODE_NO_MORE_DATA = 10
BrickRED::ERROR_CODE_WRONG_LIST_ITEM_TYPE = 11
BrickRED::ERROR_CODE_PROGRAM_IS_PURGED = 12
BrickRED::ERROR_CODE_INVALID_PARAMETER = 128
BrickRED::ERROR_CODE_NO_FREE_MEMORY = 129
BrickRED::ERROR_CODE_NO_FREE_SPACE = 130
BrickRED::ERROR_CODE_ACCESS_DENIED = 121
BrickRED::ERROR_CODE_ALREADY_EXISTS = 132
BrickRED::ERROR_CODE_DOES_NOT_EXIST = 133
BrickRED::ERROR_CODE_INTERRUPTED = 134
BrickRED::ERROR_CODE_IS_DIRECTORY = 135
BrickRED::ERROR_CODE_NOT_A_DIRECTORY = 136
BrickRED::ERROR_CODE_WOULD_BLOCK = 137
BrickRED::ERROR_CODE_OVERFLOW = 138
BrickRED::ERROR_CODE_BAD_FILE_DESCRIPTOR = 139
BrickRED::ERROR_CODE_OUT_OF_RANGE = 140
BrickRED::ERROR_CODE_NAME_TOO_LONG = 141
BrickRED::ERROR_CODE_INVALID_SEEK = 142
BrickRED::ERROR_CODE_NOT_SUPPORTED = 143
BrickRED::ERROR_CODE_TOO_MANY_OPEN_FILES = 144

BrickRED#write_file_unchecked(file_id, buffer, length_to_write) → nil¶

Parameters:	file_id – Type: int, Range: [0 to 2¹⁶ - 1] buffer – Type: [int, ...], Length: 61, Range: [0 to 255] length_to_write – Type: int, Unit: 1 B, Range: [0 to 255]

Writes up to 61 bytes to a file object.

Does neither report the actual number of bytes written nor the resulting error code.

If the file object was created by #open_file without the NonBlocking flag or by #create_pipe without the NonBlockingWrite flag then the write operation will fail silently.

BrickRED#write_file_async(file_id, buffer, length_to_write) → nil¶

Parameters:	file_id – Type: int, Range: [0 to 2¹⁶ - 1] buffer – Type: [int, ...], Length: 61, Range: [0 to 255] length_to_write – Type: int, Unit: 1 B, Range: [0 to 255]

Writes up to 61 bytes to a file object.

Reports the actual number of bytes written and the resulting error code via the ::CALLBACK_ASYNC_FILE_WRITE callback.

If the file object was created by #open_file without the NonBlocking flag or by #create_pipe without the NonBlockingWrite flag then the error code NotSupported is reported via the ::CALLBACK_ASYNC_FILE_WRITE callback.

BrickRED#set_file_position(file_id, offset, origin) → [int, int]¶

Parameters:	file_id – Type: int, Range: [0 to 2¹⁶ - 1] offset – Type: int, Unit: 1 B, Range: [-2⁶³ to 2⁶³ - 1] origin – Type: int, Range: See constants
Return Array:	0: error_code – Type: int, Range: See constants 1: position – Type: int, Unit: 1 B, Range: [0 to 2⁶⁴ - 1]

Set the current seek position of a file object relative to origin.

Possible file origins are:

Beginning = 0
Current = 1
End = 2

Returns the resulting absolute seek position and error code.

If the file object was created by #create_pipe then it has no seek position and the error code InvalidSeek is returned.

The following constants are available for this function:

For origin:

BrickRED::FILE_ORIGIN_BEGINNING = 0
BrickRED::FILE_ORIGIN_CURRENT = 1
BrickRED::FILE_ORIGIN_END = 2

For error_code:

BrickRED::ERROR_CODE_SUCCESS = 0
BrickRED::ERROR_CODE_UNKNOWN_ERROR = 1
BrickRED::ERROR_CODE_INVALID_OPERATION = 2
BrickRED::ERROR_CODE_OPERATION_ABORTED = 3
BrickRED::ERROR_CODE_INTERNAL_ERROR = 4
BrickRED::ERROR_CODE_UNKNOWN_SESSION_ID = 5
BrickRED::ERROR_CODE_NO_FREE_SESSION_ID = 6
BrickRED::ERROR_CODE_UNKNOWN_OBJECT_ID = 7
BrickRED::ERROR_CODE_NO_FREE_OBJECT_ID = 8
BrickRED::ERROR_CODE_OBJECT_IS_LOCKED = 9
BrickRED::ERROR_CODE_NO_MORE_DATA = 10
BrickRED::ERROR_CODE_WRONG_LIST_ITEM_TYPE = 11
BrickRED::ERROR_CODE_PROGRAM_IS_PURGED = 12
BrickRED::ERROR_CODE_INVALID_PARAMETER = 128
BrickRED::ERROR_CODE_NO_FREE_MEMORY = 129
BrickRED::ERROR_CODE_NO_FREE_SPACE = 130
BrickRED::ERROR_CODE_ACCESS_DENIED = 121
BrickRED::ERROR_CODE_ALREADY_EXISTS = 132
BrickRED::ERROR_CODE_DOES_NOT_EXIST = 133
BrickRED::ERROR_CODE_INTERRUPTED = 134
BrickRED::ERROR_CODE_IS_DIRECTORY = 135
BrickRED::ERROR_CODE_NOT_A_DIRECTORY = 136
BrickRED::ERROR_CODE_WOULD_BLOCK = 137
BrickRED::ERROR_CODE_OVERFLOW = 138
BrickRED::ERROR_CODE_BAD_FILE_DESCRIPTOR = 139
BrickRED::ERROR_CODE_OUT_OF_RANGE = 140
BrickRED::ERROR_CODE_NAME_TOO_LONG = 141
BrickRED::ERROR_CODE_INVALID_SEEK = 142
BrickRED::ERROR_CODE_NOT_SUPPORTED = 143
BrickRED::ERROR_CODE_TOO_MANY_OPEN_FILES = 144

BrickRED#get_file_position(file_id) → [int, int]¶

Parameters:	file_id – Type: int, Range: [0 to 2¹⁶ - 1]
Return Array:	0: error_code – Type: int, Range: See constants 1: position – Type: int, Unit: 1 B, Range: [0 to 2⁶⁴ - 1]

Returns the current seek position of a file object and returns the resulting error code.

If the file object was created by #create_pipe then it has no seek position and the error code InvalidSeek is returned.

The following constants are available for this function:

For error_code:

BrickRED::ERROR_CODE_SUCCESS = 0
BrickRED::ERROR_CODE_UNKNOWN_ERROR = 1
BrickRED::ERROR_CODE_INVALID_OPERATION = 2
BrickRED::ERROR_CODE_OPERATION_ABORTED = 3
BrickRED::ERROR_CODE_INTERNAL_ERROR = 4
BrickRED::ERROR_CODE_UNKNOWN_SESSION_ID = 5
BrickRED::ERROR_CODE_NO_FREE_SESSION_ID = 6
BrickRED::ERROR_CODE_UNKNOWN_OBJECT_ID = 7
BrickRED::ERROR_CODE_NO_FREE_OBJECT_ID = 8
BrickRED::ERROR_CODE_OBJECT_IS_LOCKED = 9
BrickRED::ERROR_CODE_NO_MORE_DATA = 10
BrickRED::ERROR_CODE_WRONG_LIST_ITEM_TYPE = 11
BrickRED::ERROR_CODE_PROGRAM_IS_PURGED = 12
BrickRED::ERROR_CODE_INVALID_PARAMETER = 128
BrickRED::ERROR_CODE_NO_FREE_MEMORY = 129
BrickRED::ERROR_CODE_NO_FREE_SPACE = 130
BrickRED::ERROR_CODE_ACCESS_DENIED = 121
BrickRED::ERROR_CODE_ALREADY_EXISTS = 132
BrickRED::ERROR_CODE_DOES_NOT_EXIST = 133
BrickRED::ERROR_CODE_INTERRUPTED = 134
BrickRED::ERROR_CODE_IS_DIRECTORY = 135
BrickRED::ERROR_CODE_NOT_A_DIRECTORY = 136
BrickRED::ERROR_CODE_WOULD_BLOCK = 137
BrickRED::ERROR_CODE_OVERFLOW = 138
BrickRED::ERROR_CODE_BAD_FILE_DESCRIPTOR = 139
BrickRED::ERROR_CODE_OUT_OF_RANGE = 140
BrickRED::ERROR_CODE_NAME_TOO_LONG = 141
BrickRED::ERROR_CODE_INVALID_SEEK = 142
BrickRED::ERROR_CODE_NOT_SUPPORTED = 143
BrickRED::ERROR_CODE_TOO_MANY_OPEN_FILES = 144

BrickRED#set_file_events(file_id, events) → int¶

Parameters:	file_id – Type: int, Range: [0 to 2¹⁶ - 1] events – Type: int, Range: See constants
Returns:	error_code – Type: int, Range: See constants

The following constants are available for this function:

For events:

BrickRED::FILE_EVENT_READABLE = 1
BrickRED::FILE_EVENT_WRITABLE = 2

For error_code:

BrickRED::ERROR_CODE_SUCCESS = 0
BrickRED::ERROR_CODE_UNKNOWN_ERROR = 1
BrickRED::ERROR_CODE_INVALID_OPERATION = 2
BrickRED::ERROR_CODE_OPERATION_ABORTED = 3
BrickRED::ERROR_CODE_INTERNAL_ERROR = 4
BrickRED::ERROR_CODE_UNKNOWN_SESSION_ID = 5
BrickRED::ERROR_CODE_NO_FREE_SESSION_ID = 6
BrickRED::ERROR_CODE_UNKNOWN_OBJECT_ID = 7
BrickRED::ERROR_CODE_NO_FREE_OBJECT_ID = 8
BrickRED::ERROR_CODE_OBJECT_IS_LOCKED = 9
BrickRED::ERROR_CODE_NO_MORE_DATA = 10
BrickRED::ERROR_CODE_WRONG_LIST_ITEM_TYPE = 11
BrickRED::ERROR_CODE_PROGRAM_IS_PURGED = 12
BrickRED::ERROR_CODE_INVALID_PARAMETER = 128
BrickRED::ERROR_CODE_NO_FREE_MEMORY = 129
BrickRED::ERROR_CODE_NO_FREE_SPACE = 130
BrickRED::ERROR_CODE_ACCESS_DENIED = 121
BrickRED::ERROR_CODE_ALREADY_EXISTS = 132
BrickRED::ERROR_CODE_DOES_NOT_EXIST = 133
BrickRED::ERROR_CODE_INTERRUPTED = 134
BrickRED::ERROR_CODE_IS_DIRECTORY = 135
BrickRED::ERROR_CODE_NOT_A_DIRECTORY = 136
BrickRED::ERROR_CODE_WOULD_BLOCK = 137
BrickRED::ERROR_CODE_OVERFLOW = 138
BrickRED::ERROR_CODE_BAD_FILE_DESCRIPTOR = 139
BrickRED::ERROR_CODE_OUT_OF_RANGE = 140
BrickRED::ERROR_CODE_NAME_TOO_LONG = 141
BrickRED::ERROR_CODE_INVALID_SEEK = 142
BrickRED::ERROR_CODE_NOT_SUPPORTED = 143
BrickRED::ERROR_CODE_TOO_MANY_OPEN_FILES = 144

BrickRED#get_file_events(file_id) → [int, int]¶

Parameters:	file_id – Type: int, Range: [0 to 2¹⁶ - 1]
Return Array:	0: error_code – Type: int, Range: See constants 1: events – Type: int, Range: See constants

The following constants are available for this function:

For error_code:

BrickRED::ERROR_CODE_SUCCESS = 0
BrickRED::ERROR_CODE_UNKNOWN_ERROR = 1
BrickRED::ERROR_CODE_INVALID_OPERATION = 2
BrickRED::ERROR_CODE_OPERATION_ABORTED = 3
BrickRED::ERROR_CODE_INTERNAL_ERROR = 4
BrickRED::ERROR_CODE_UNKNOWN_SESSION_ID = 5
BrickRED::ERROR_CODE_NO_FREE_SESSION_ID = 6
BrickRED::ERROR_CODE_UNKNOWN_OBJECT_ID = 7
BrickRED::ERROR_CODE_NO_FREE_OBJECT_ID = 8
BrickRED::ERROR_CODE_OBJECT_IS_LOCKED = 9
BrickRED::ERROR_CODE_NO_MORE_DATA = 10
BrickRED::ERROR_CODE_WRONG_LIST_ITEM_TYPE = 11
BrickRED::ERROR_CODE_PROGRAM_IS_PURGED = 12
BrickRED::ERROR_CODE_INVALID_PARAMETER = 128
BrickRED::ERROR_CODE_NO_FREE_MEMORY = 129
BrickRED::ERROR_CODE_NO_FREE_SPACE = 130
BrickRED::ERROR_CODE_ACCESS_DENIED = 121
BrickRED::ERROR_CODE_ALREADY_EXISTS = 132
BrickRED::ERROR_CODE_DOES_NOT_EXIST = 133
BrickRED::ERROR_CODE_INTERRUPTED = 134
BrickRED::ERROR_CODE_IS_DIRECTORY = 135
BrickRED::ERROR_CODE_NOT_A_DIRECTORY = 136
BrickRED::ERROR_CODE_WOULD_BLOCK = 137
BrickRED::ERROR_CODE_OVERFLOW = 138
BrickRED::ERROR_CODE_BAD_FILE_DESCRIPTOR = 139
BrickRED::ERROR_CODE_OUT_OF_RANGE = 140
BrickRED::ERROR_CODE_NAME_TOO_LONG = 141
BrickRED::ERROR_CODE_INVALID_SEEK = 142
BrickRED::ERROR_CODE_NOT_SUPPORTED = 143
BrickRED::ERROR_CODE_TOO_MANY_OPEN_FILES = 144

For events:

BrickRED::FILE_EVENT_READABLE = 1
BrickRED::FILE_EVENT_WRITABLE = 2

BrickRED#open_directory(name_string_id, session_id) → [int, int]¶

Parameters:	name_string_id – Type: int, Range: [0 to 2¹⁶ - 1] session_id – Type: int, Range: [0 to 2¹⁶ - 1]
Return Array:	0: error_code – Type: int, Range: See constants 1: directory_id – Type: int, Range: [0 to 2¹⁶ - 1]

Opens an existing directory and allocates a new directory object for it.

FIXME: name has to be absolute

The reference count of the name string object is increased by one. When the directory object is destroyed then the reference count of the name string object is decreased by one. Also the name string object is locked and cannot be modified while the directory object holds a reference to it.

Returns the object ID of the new directory object and the resulting error code.

The following constants are available for this function:

For error_code:

BrickRED::ERROR_CODE_SUCCESS = 0
BrickRED::ERROR_CODE_UNKNOWN_ERROR = 1
BrickRED::ERROR_CODE_INVALID_OPERATION = 2
BrickRED::ERROR_CODE_OPERATION_ABORTED = 3
BrickRED::ERROR_CODE_INTERNAL_ERROR = 4
BrickRED::ERROR_CODE_UNKNOWN_SESSION_ID = 5
BrickRED::ERROR_CODE_NO_FREE_SESSION_ID = 6
BrickRED::ERROR_CODE_UNKNOWN_OBJECT_ID = 7
BrickRED::ERROR_CODE_NO_FREE_OBJECT_ID = 8
BrickRED::ERROR_CODE_OBJECT_IS_LOCKED = 9
BrickRED::ERROR_CODE_NO_MORE_DATA = 10
BrickRED::ERROR_CODE_WRONG_LIST_ITEM_TYPE = 11
BrickRED::ERROR_CODE_PROGRAM_IS_PURGED = 12
BrickRED::ERROR_CODE_INVALID_PARAMETER = 128
BrickRED::ERROR_CODE_NO_FREE_MEMORY = 129
BrickRED::ERROR_CODE_NO_FREE_SPACE = 130
BrickRED::ERROR_CODE_ACCESS_DENIED = 121
BrickRED::ERROR_CODE_ALREADY_EXISTS = 132
BrickRED::ERROR_CODE_DOES_NOT_EXIST = 133
BrickRED::ERROR_CODE_INTERRUPTED = 134
BrickRED::ERROR_CODE_IS_DIRECTORY = 135
BrickRED::ERROR_CODE_NOT_A_DIRECTORY = 136
BrickRED::ERROR_CODE_WOULD_BLOCK = 137
BrickRED::ERROR_CODE_OVERFLOW = 138
BrickRED::ERROR_CODE_BAD_FILE_DESCRIPTOR = 139
BrickRED::ERROR_CODE_OUT_OF_RANGE = 140
BrickRED::ERROR_CODE_NAME_TOO_LONG = 141
BrickRED::ERROR_CODE_INVALID_SEEK = 142
BrickRED::ERROR_CODE_NOT_SUPPORTED = 143
BrickRED::ERROR_CODE_TOO_MANY_OPEN_FILES = 144

BrickRED#get_directory_name(directory_id, session_id) → [int, int]¶

Parameters:	directory_id – Type: int, Range: [0 to 2¹⁶ - 1] session_id – Type: int, Range: [0 to 2¹⁶ - 1]
Return Array:	0: error_code – Type: int, Range: See constants 1: name_string_id – Type: int, Range: [0 to 2¹⁶ - 1]

Returns the name of a directory object, as passed to #open_directory, and the resulting error code.

The following constants are available for this function:

For error_code:

BrickRED::ERROR_CODE_SUCCESS = 0
BrickRED::ERROR_CODE_UNKNOWN_ERROR = 1
BrickRED::ERROR_CODE_INVALID_OPERATION = 2
BrickRED::ERROR_CODE_OPERATION_ABORTED = 3
BrickRED::ERROR_CODE_INTERNAL_ERROR = 4
BrickRED::ERROR_CODE_UNKNOWN_SESSION_ID = 5
BrickRED::ERROR_CODE_NO_FREE_SESSION_ID = 6
BrickRED::ERROR_CODE_UNKNOWN_OBJECT_ID = 7
BrickRED::ERROR_CODE_NO_FREE_OBJECT_ID = 8
BrickRED::ERROR_CODE_OBJECT_IS_LOCKED = 9
BrickRED::ERROR_CODE_NO_MORE_DATA = 10
BrickRED::ERROR_CODE_WRONG_LIST_ITEM_TYPE = 11
BrickRED::ERROR_CODE_PROGRAM_IS_PURGED = 12
BrickRED::ERROR_CODE_INVALID_PARAMETER = 128
BrickRED::ERROR_CODE_NO_FREE_MEMORY = 129
BrickRED::ERROR_CODE_NO_FREE_SPACE = 130
BrickRED::ERROR_CODE_ACCESS_DENIED = 121
BrickRED::ERROR_CODE_ALREADY_EXISTS = 132
BrickRED::ERROR_CODE_DOES_NOT_EXIST = 133
BrickRED::ERROR_CODE_INTERRUPTED = 134
BrickRED::ERROR_CODE_IS_DIRECTORY = 135
BrickRED::ERROR_CODE_NOT_A_DIRECTORY = 136
BrickRED::ERROR_CODE_WOULD_BLOCK = 137
BrickRED::ERROR_CODE_OVERFLOW = 138
BrickRED::ERROR_CODE_BAD_FILE_DESCRIPTOR = 139
BrickRED::ERROR_CODE_OUT_OF_RANGE = 140
BrickRED::ERROR_CODE_NAME_TOO_LONG = 141
BrickRED::ERROR_CODE_INVALID_SEEK = 142
BrickRED::ERROR_CODE_NOT_SUPPORTED = 143
BrickRED::ERROR_CODE_TOO_MANY_OPEN_FILES = 144

BrickRED#get_next_directory_entry(directory_id, session_id) → [int, int, int]¶

Parameters:	directory_id – Type: int, Range: [0 to 2¹⁶ - 1] session_id – Type: int, Range: [0 to 2¹⁶ - 1]
Return Array:	0: error_code – Type: int, Range: See constants 1: name_string_id – Type: int, Range: [0 to 2¹⁶ - 1] 2: type – Type: int, Range: See constants

Returns the next entry in a directory object and the resulting error code.

If there is not next entry then error code NoMoreData is returned. To rewind a directory object call #rewind_directory.

Possible directory entry types are:

Unknown = 0
Regular = 1
Directory = 2
Character = 3
Block = 4
FIFO = 5
Symlink = 6
Socket = 7

The following constants are available for this function:

For error_code:

BrickRED::ERROR_CODE_SUCCESS = 0
BrickRED::ERROR_CODE_UNKNOWN_ERROR = 1
BrickRED::ERROR_CODE_INVALID_OPERATION = 2
BrickRED::ERROR_CODE_OPERATION_ABORTED = 3
BrickRED::ERROR_CODE_INTERNAL_ERROR = 4
BrickRED::ERROR_CODE_UNKNOWN_SESSION_ID = 5
BrickRED::ERROR_CODE_NO_FREE_SESSION_ID = 6
BrickRED::ERROR_CODE_UNKNOWN_OBJECT_ID = 7
BrickRED::ERROR_CODE_NO_FREE_OBJECT_ID = 8
BrickRED::ERROR_CODE_OBJECT_IS_LOCKED = 9
BrickRED::ERROR_CODE_NO_MORE_DATA = 10
BrickRED::ERROR_CODE_WRONG_LIST_ITEM_TYPE = 11
BrickRED::ERROR_CODE_PROGRAM_IS_PURGED = 12
BrickRED::ERROR_CODE_INVALID_PARAMETER = 128
BrickRED::ERROR_CODE_NO_FREE_MEMORY = 129
BrickRED::ERROR_CODE_NO_FREE_SPACE = 130
BrickRED::ERROR_CODE_ACCESS_DENIED = 121
BrickRED::ERROR_CODE_ALREADY_EXISTS = 132
BrickRED::ERROR_CODE_DOES_NOT_EXIST = 133
BrickRED::ERROR_CODE_INTERRUPTED = 134
BrickRED::ERROR_CODE_IS_DIRECTORY = 135
BrickRED::ERROR_CODE_NOT_A_DIRECTORY = 136
BrickRED::ERROR_CODE_WOULD_BLOCK = 137
BrickRED::ERROR_CODE_OVERFLOW = 138
BrickRED::ERROR_CODE_BAD_FILE_DESCRIPTOR = 139
BrickRED::ERROR_CODE_OUT_OF_RANGE = 140
BrickRED::ERROR_CODE_NAME_TOO_LONG = 141
BrickRED::ERROR_CODE_INVALID_SEEK = 142
BrickRED::ERROR_CODE_NOT_SUPPORTED = 143
BrickRED::ERROR_CODE_TOO_MANY_OPEN_FILES = 144

For type:

BrickRED::DIRECTORY_ENTRY_TYPE_UNKNOWN = 0
BrickRED::DIRECTORY_ENTRY_TYPE_REGULAR = 1
BrickRED::DIRECTORY_ENTRY_TYPE_DIRECTORY = 2
BrickRED::DIRECTORY_ENTRY_TYPE_CHARACTER = 3
BrickRED::DIRECTORY_ENTRY_TYPE_BLOCK = 4
BrickRED::DIRECTORY_ENTRY_TYPE_FIFO = 5
BrickRED::DIRECTORY_ENTRY_TYPE_SYMLINK = 6
BrickRED::DIRECTORY_ENTRY_TYPE_SOCKET = 7

BrickRED#rewind_directory(directory_id) → int¶

Parameters:	directory_id – Type: int, Range: [0 to 2¹⁶ - 1]
Returns:	error_code – Type: int, Range: See constants

Rewinds a directory object and returns the resulting error code.

The following constants are available for this function:

For error_code:

BrickRED::ERROR_CODE_SUCCESS = 0
BrickRED::ERROR_CODE_UNKNOWN_ERROR = 1
BrickRED::ERROR_CODE_INVALID_OPERATION = 2
BrickRED::ERROR_CODE_OPERATION_ABORTED = 3
BrickRED::ERROR_CODE_INTERNAL_ERROR = 4
BrickRED::ERROR_CODE_UNKNOWN_SESSION_ID = 5
BrickRED::ERROR_CODE_NO_FREE_SESSION_ID = 6
BrickRED::ERROR_CODE_UNKNOWN_OBJECT_ID = 7
BrickRED::ERROR_CODE_NO_FREE_OBJECT_ID = 8
BrickRED::ERROR_CODE_OBJECT_IS_LOCKED = 9
BrickRED::ERROR_CODE_NO_MORE_DATA = 10
BrickRED::ERROR_CODE_WRONG_LIST_ITEM_TYPE = 11
BrickRED::ERROR_CODE_PROGRAM_IS_PURGED = 12
BrickRED::ERROR_CODE_INVALID_PARAMETER = 128
BrickRED::ERROR_CODE_NO_FREE_MEMORY = 129
BrickRED::ERROR_CODE_NO_FREE_SPACE = 130
BrickRED::ERROR_CODE_ACCESS_DENIED = 121
BrickRED::ERROR_CODE_ALREADY_EXISTS = 132
BrickRED::ERROR_CODE_DOES_NOT_EXIST = 133
BrickRED::ERROR_CODE_INTERRUPTED = 134
BrickRED::ERROR_CODE_IS_DIRECTORY = 135
BrickRED::ERROR_CODE_NOT_A_DIRECTORY = 136
BrickRED::ERROR_CODE_WOULD_BLOCK = 137
BrickRED::ERROR_CODE_OVERFLOW = 138
BrickRED::ERROR_CODE_BAD_FILE_DESCRIPTOR = 139
BrickRED::ERROR_CODE_OUT_OF_RANGE = 140
BrickRED::ERROR_CODE_NAME_TOO_LONG = 141
BrickRED::ERROR_CODE_INVALID_SEEK = 142
BrickRED::ERROR_CODE_NOT_SUPPORTED = 143
BrickRED::ERROR_CODE_TOO_MANY_OPEN_FILES = 144

BrickRED#create_directory(name_string_id, flags, permissions, uid, gid) → int¶

Parameters:	name_string_id – Type: int, Range: [0 to 2¹⁶ - 1] flags – Type: int, Range: See constants permissions – Type: int, Range: See constants uid – Type: int, Range: [0 to 2³² - 1] gid – Type: int, Range: [0 to 2³² - 1]
Returns:	error_code – Type: int, Range: See constants

FIXME: name has to be absolute

The following constants are available for this function:

For flags:

BrickRED::DIRECTORY_FLAG_RECURSIVE = 1
BrickRED::DIRECTORY_FLAG_EXCLUSIVE = 2

For permissions:

BrickRED::FILE_PERMISSION_USER_ALL = 448
BrickRED::FILE_PERMISSION_USER_READ = 256
BrickRED::FILE_PERMISSION_USER_WRITE = 128
BrickRED::FILE_PERMISSION_USER_EXECUTE = 64
BrickRED::FILE_PERMISSION_GROUP_ALL = 56
BrickRED::FILE_PERMISSION_GROUP_READ = 32
BrickRED::FILE_PERMISSION_GROUP_WRITE = 16
BrickRED::FILE_PERMISSION_GROUP_EXECUTE = 8
BrickRED::FILE_PERMISSION_OTHERS_ALL = 7
BrickRED::FILE_PERMISSION_OTHERS_READ = 4
BrickRED::FILE_PERMISSION_OTHERS_WRITE = 2
BrickRED::FILE_PERMISSION_OTHERS_EXECUTE = 1

For error_code:

BrickRED::ERROR_CODE_SUCCESS = 0
BrickRED::ERROR_CODE_UNKNOWN_ERROR = 1
BrickRED::ERROR_CODE_INVALID_OPERATION = 2
BrickRED::ERROR_CODE_OPERATION_ABORTED = 3
BrickRED::ERROR_CODE_INTERNAL_ERROR = 4
BrickRED::ERROR_CODE_UNKNOWN_SESSION_ID = 5
BrickRED::ERROR_CODE_NO_FREE_SESSION_ID = 6
BrickRED::ERROR_CODE_UNKNOWN_OBJECT_ID = 7
BrickRED::ERROR_CODE_NO_FREE_OBJECT_ID = 8
BrickRED::ERROR_CODE_OBJECT_IS_LOCKED = 9
BrickRED::ERROR_CODE_NO_MORE_DATA = 10
BrickRED::ERROR_CODE_WRONG_LIST_ITEM_TYPE = 11
BrickRED::ERROR_CODE_PROGRAM_IS_PURGED = 12
BrickRED::ERROR_CODE_INVALID_PARAMETER = 128
BrickRED::ERROR_CODE_NO_FREE_MEMORY = 129
BrickRED::ERROR_CODE_NO_FREE_SPACE = 130
BrickRED::ERROR_CODE_ACCESS_DENIED = 121
BrickRED::ERROR_CODE_ALREADY_EXISTS = 132
BrickRED::ERROR_CODE_DOES_NOT_EXIST = 133
BrickRED::ERROR_CODE_INTERRUPTED = 134
BrickRED::ERROR_CODE_IS_DIRECTORY = 135
BrickRED::ERROR_CODE_NOT_A_DIRECTORY = 136
BrickRED::ERROR_CODE_WOULD_BLOCK = 137
BrickRED::ERROR_CODE_OVERFLOW = 138
BrickRED::ERROR_CODE_BAD_FILE_DESCRIPTOR = 139
BrickRED::ERROR_CODE_OUT_OF_RANGE = 140
BrickRED::ERROR_CODE_NAME_TOO_LONG = 141
BrickRED::ERROR_CODE_INVALID_SEEK = 142
BrickRED::ERROR_CODE_NOT_SUPPORTED = 143
BrickRED::ERROR_CODE_TOO_MANY_OPEN_FILES = 144

BrickRED#get_processes(session_id) → [int, int]¶

Parameters:	session_id – Type: int, Range: [0 to 2¹⁶ - 1]
Return Array:	0: error_code – Type: int, Range: See constants 1: processes_list_id – Type: int, Range: [0 to 2¹⁶ - 1]

The following constants are available for this function:

For error_code:

BrickRED::ERROR_CODE_SUCCESS = 0
BrickRED::ERROR_CODE_UNKNOWN_ERROR = 1
BrickRED::ERROR_CODE_INVALID_OPERATION = 2
BrickRED::ERROR_CODE_OPERATION_ABORTED = 3
BrickRED::ERROR_CODE_INTERNAL_ERROR = 4
BrickRED::ERROR_CODE_UNKNOWN_SESSION_ID = 5
BrickRED::ERROR_CODE_NO_FREE_SESSION_ID = 6
BrickRED::ERROR_CODE_UNKNOWN_OBJECT_ID = 7
BrickRED::ERROR_CODE_NO_FREE_OBJECT_ID = 8
BrickRED::ERROR_CODE_OBJECT_IS_LOCKED = 9
BrickRED::ERROR_CODE_NO_MORE_DATA = 10
BrickRED::ERROR_CODE_WRONG_LIST_ITEM_TYPE = 11
BrickRED::ERROR_CODE_PROGRAM_IS_PURGED = 12
BrickRED::ERROR_CODE_INVALID_PARAMETER = 128
BrickRED::ERROR_CODE_NO_FREE_MEMORY = 129
BrickRED::ERROR_CODE_NO_FREE_SPACE = 130
BrickRED::ERROR_CODE_ACCESS_DENIED = 121
BrickRED::ERROR_CODE_ALREADY_EXISTS = 132
BrickRED::ERROR_CODE_DOES_NOT_EXIST = 133
BrickRED::ERROR_CODE_INTERRUPTED = 134
BrickRED::ERROR_CODE_IS_DIRECTORY = 135
BrickRED::ERROR_CODE_NOT_A_DIRECTORY = 136
BrickRED::ERROR_CODE_WOULD_BLOCK = 137
BrickRED::ERROR_CODE_OVERFLOW = 138
BrickRED::ERROR_CODE_BAD_FILE_DESCRIPTOR = 139
BrickRED::ERROR_CODE_OUT_OF_RANGE = 140
BrickRED::ERROR_CODE_NAME_TOO_LONG = 141
BrickRED::ERROR_CODE_INVALID_SEEK = 142
BrickRED::ERROR_CODE_NOT_SUPPORTED = 143
BrickRED::ERROR_CODE_TOO_MANY_OPEN_FILES = 144

BrickRED#spawn_process(executable_string_id, arguments_list_id, environment_list_id, working_directory_string_id, uid, gid, stdin_file_id, stdout_file_id, stderr_file_id, session_id) → [int, int]¶

Parameters:

Parameters:	executable_string_id – Type: int, Range: [0 to 2¹⁶ - 1] arguments_list_id – Type: int, Range: [0 to 2¹⁶ - 1] environment_list_id – Type: int, Range: [0 to 2¹⁶ - 1] working_directory_string_id – Type: int, Range: [0 to 2¹⁶ - 1] uid – Type: int, Range: [0 to 2³² - 1] gid – Type: int, Range: [0 to 2³² - 1] stdin_file_id – Type: int, Range: [0 to 2¹⁶ - 1] stdout_file_id – Type: int, Range: [0 to 2¹⁶ - 1] stderr_file_id – Type: int, Range: [0 to 2¹⁶ - 1] session_id – Type: int, Range: [0 to 2¹⁶ - 1]
Return Array:	0: error_code – Type: int, Range: See constants 1: process_id – Type: int, Range: [0 to 2¹⁶ - 1]

executable_string_id – Type: int, Range: [0 to 2¹⁶ - 1]
arguments_list_id – Type: int, Range: [0 to 2¹⁶ - 1]
environment_list_id – Type: int, Range: [0 to 2¹⁶ - 1]
working_directory_string_id – Type: int, Range: [0 to 2¹⁶ - 1]
uid – Type: int, Range: [0 to 2³² - 1]
gid – Type: int, Range: [0 to 2³² - 1]
stdin_file_id – Type: int, Range: [0 to 2¹⁶ - 1]
stdout_file_id – Type: int, Range: [0 to 2¹⁶ - 1]
stderr_file_id – Type: int, Range: [0 to 2¹⁶ - 1]
session_id – Type: int, Range: [0 to 2¹⁶ - 1]

Return Array:

0: error_code – Type: int, Range: See constants
1: process_id – Type: int, Range: [0 to 2¹⁶ - 1]

The following constants are available for this function:

For error_code:

BrickRED::ERROR_CODE_SUCCESS = 0
BrickRED::ERROR_CODE_UNKNOWN_ERROR = 1
BrickRED::ERROR_CODE_INVALID_OPERATION = 2
BrickRED::ERROR_CODE_OPERATION_ABORTED = 3
BrickRED::ERROR_CODE_INTERNAL_ERROR = 4
BrickRED::ERROR_CODE_UNKNOWN_SESSION_ID = 5
BrickRED::ERROR_CODE_NO_FREE_SESSION_ID = 6
BrickRED::ERROR_CODE_UNKNOWN_OBJECT_ID = 7
BrickRED::ERROR_CODE_NO_FREE_OBJECT_ID = 8
BrickRED::ERROR_CODE_OBJECT_IS_LOCKED = 9
BrickRED::ERROR_CODE_NO_MORE_DATA = 10
BrickRED::ERROR_CODE_WRONG_LIST_ITEM_TYPE = 11
BrickRED::ERROR_CODE_PROGRAM_IS_PURGED = 12
BrickRED::ERROR_CODE_INVALID_PARAMETER = 128
BrickRED::ERROR_CODE_NO_FREE_MEMORY = 129
BrickRED::ERROR_CODE_NO_FREE_SPACE = 130
BrickRED::ERROR_CODE_ACCESS_DENIED = 121
BrickRED::ERROR_CODE_ALREADY_EXISTS = 132
BrickRED::ERROR_CODE_DOES_NOT_EXIST = 133
BrickRED::ERROR_CODE_INTERRUPTED = 134
BrickRED::ERROR_CODE_IS_DIRECTORY = 135
BrickRED::ERROR_CODE_NOT_A_DIRECTORY = 136
BrickRED::ERROR_CODE_WOULD_BLOCK = 137
BrickRED::ERROR_CODE_OVERFLOW = 138
BrickRED::ERROR_CODE_BAD_FILE_DESCRIPTOR = 139
BrickRED::ERROR_CODE_OUT_OF_RANGE = 140
BrickRED::ERROR_CODE_NAME_TOO_LONG = 141
BrickRED::ERROR_CODE_INVALID_SEEK = 142
BrickRED::ERROR_CODE_NOT_SUPPORTED = 143
BrickRED::ERROR_CODE_TOO_MANY_OPEN_FILES = 144

BrickRED#kill_process(process_id, signal) → int¶

Parameters:	process_id – Type: int, Range: [0 to 2¹⁶ - 1] signal – Type: int, Range: See constants
Returns:	error_code – Type: int, Range: See constants

Sends a UNIX signal to a process object and returns the resulting error code.

Possible UNIX signals are:

Interrupt = 2
Quit = 3
Abort = 6
Kill = 9
User1 = 10
User2 = 12
Terminate = 15
Continue = 18
Stop = 19

The following constants are available for this function:

For signal:

BrickRED::PROCESS_SIGNAL_INTERRUPT = 2
BrickRED::PROCESS_SIGNAL_QUIT = 3
BrickRED::PROCESS_SIGNAL_ABORT = 6
BrickRED::PROCESS_SIGNAL_KILL = 9
BrickRED::PROCESS_SIGNAL_USER1 = 10
BrickRED::PROCESS_SIGNAL_USER2 = 12
BrickRED::PROCESS_SIGNAL_TERMINATE = 15
BrickRED::PROCESS_SIGNAL_CONTINUE = 18
BrickRED::PROCESS_SIGNAL_STOP = 19

For error_code:

BrickRED::ERROR_CODE_SUCCESS = 0
BrickRED::ERROR_CODE_UNKNOWN_ERROR = 1
BrickRED::ERROR_CODE_INVALID_OPERATION = 2
BrickRED::ERROR_CODE_OPERATION_ABORTED = 3
BrickRED::ERROR_CODE_INTERNAL_ERROR = 4
BrickRED::ERROR_CODE_UNKNOWN_SESSION_ID = 5
BrickRED::ERROR_CODE_NO_FREE_SESSION_ID = 6
BrickRED::ERROR_CODE_UNKNOWN_OBJECT_ID = 7
BrickRED::ERROR_CODE_NO_FREE_OBJECT_ID = 8
BrickRED::ERROR_CODE_OBJECT_IS_LOCKED = 9
BrickRED::ERROR_CODE_NO_MORE_DATA = 10
BrickRED::ERROR_CODE_WRONG_LIST_ITEM_TYPE = 11
BrickRED::ERROR_CODE_PROGRAM_IS_PURGED = 12
BrickRED::ERROR_CODE_INVALID_PARAMETER = 128
BrickRED::ERROR_CODE_NO_FREE_MEMORY = 129
BrickRED::ERROR_CODE_NO_FREE_SPACE = 130
BrickRED::ERROR_CODE_ACCESS_DENIED = 121
BrickRED::ERROR_CODE_ALREADY_EXISTS = 132
BrickRED::ERROR_CODE_DOES_NOT_EXIST = 133
BrickRED::ERROR_CODE_INTERRUPTED = 134
BrickRED::ERROR_CODE_IS_DIRECTORY = 135
BrickRED::ERROR_CODE_NOT_A_DIRECTORY = 136
BrickRED::ERROR_CODE_WOULD_BLOCK = 137
BrickRED::ERROR_CODE_OVERFLOW = 138
BrickRED::ERROR_CODE_BAD_FILE_DESCRIPTOR = 139
BrickRED::ERROR_CODE_OUT_OF_RANGE = 140
BrickRED::ERROR_CODE_NAME_TOO_LONG = 141
BrickRED::ERROR_CODE_INVALID_SEEK = 142
BrickRED::ERROR_CODE_NOT_SUPPORTED = 143
BrickRED::ERROR_CODE_TOO_MANY_OPEN_FILES = 144

BrickRED#get_process_command(process_id, session_id) → [int, int, int, int, int]¶

Parameters:	process_id – Type: int, Range: [0 to 2¹⁶ - 1] session_id – Type: int, Range: [0 to 2¹⁶ - 1]
Return Array:	0: error_code – Type: int, Range: See constants 1: executable_string_id – Type: int, Range: [0 to 2¹⁶ - 1] 2: arguments_list_id – Type: int, Range: [0 to 2¹⁶ - 1] 3: environment_list_id – Type: int, Range: [0 to 2¹⁶ - 1] 4: working_directory_string_id – Type: int, Range: [0 to 2¹⁶ - 1]

Returns the executable, arguments, environment and working directory used to spawn a process object, as passed to #spawn_process, and the resulting error code.

The following constants are available for this function:

For error_code:

BrickRED::ERROR_CODE_SUCCESS = 0
BrickRED::ERROR_CODE_UNKNOWN_ERROR = 1
BrickRED::ERROR_CODE_INVALID_OPERATION = 2
BrickRED::ERROR_CODE_OPERATION_ABORTED = 3
BrickRED::ERROR_CODE_INTERNAL_ERROR = 4
BrickRED::ERROR_CODE_UNKNOWN_SESSION_ID = 5
BrickRED::ERROR_CODE_NO_FREE_SESSION_ID = 6
BrickRED::ERROR_CODE_UNKNOWN_OBJECT_ID = 7
BrickRED::ERROR_CODE_NO_FREE_OBJECT_ID = 8
BrickRED::ERROR_CODE_OBJECT_IS_LOCKED = 9
BrickRED::ERROR_CODE_NO_MORE_DATA = 10
BrickRED::ERROR_CODE_WRONG_LIST_ITEM_TYPE = 11
BrickRED::ERROR_CODE_PROGRAM_IS_PURGED = 12
BrickRED::ERROR_CODE_INVALID_PARAMETER = 128
BrickRED::ERROR_CODE_NO_FREE_MEMORY = 129
BrickRED::ERROR_CODE_NO_FREE_SPACE = 130
BrickRED::ERROR_CODE_ACCESS_DENIED = 121
BrickRED::ERROR_CODE_ALREADY_EXISTS = 132
BrickRED::ERROR_CODE_DOES_NOT_EXIST = 133
BrickRED::ERROR_CODE_INTERRUPTED = 134
BrickRED::ERROR_CODE_IS_DIRECTORY = 135
BrickRED::ERROR_CODE_NOT_A_DIRECTORY = 136
BrickRED::ERROR_CODE_WOULD_BLOCK = 137
BrickRED::ERROR_CODE_OVERFLOW = 138
BrickRED::ERROR_CODE_BAD_FILE_DESCRIPTOR = 139
BrickRED::ERROR_CODE_OUT_OF_RANGE = 140
BrickRED::ERROR_CODE_NAME_TOO_LONG = 141
BrickRED::ERROR_CODE_INVALID_SEEK = 142
BrickRED::ERROR_CODE_NOT_SUPPORTED = 143
BrickRED::ERROR_CODE_TOO_MANY_OPEN_FILES = 144

BrickRED#get_process_identity(process_id) → [int, int, int, int]¶

Parameters:	process_id – Type: int, Range: [0 to 2¹⁶ - 1]
Return Array:	0: error_code – Type: int, Range: See constants 1: pid – Type: int, Range: [0 to 2³² - 1] 2: uid – Type: int, Range: [0 to 2³² - 1] 3: gid – Type: int, Range: [0 to 2³² - 1]

Returns the process ID and the user and group ID used to spawn a process object, as passed to #spawn_process, and the resulting error code.

The process ID is only valid if the state is Running or Stopped, see #get_process_state.

The following constants are available for this function:

For error_code:

BrickRED::ERROR_CODE_SUCCESS = 0
BrickRED::ERROR_CODE_UNKNOWN_ERROR = 1
BrickRED::ERROR_CODE_INVALID_OPERATION = 2
BrickRED::ERROR_CODE_OPERATION_ABORTED = 3
BrickRED::ERROR_CODE_INTERNAL_ERROR = 4
BrickRED::ERROR_CODE_UNKNOWN_SESSION_ID = 5
BrickRED::ERROR_CODE_NO_FREE_SESSION_ID = 6
BrickRED::ERROR_CODE_UNKNOWN_OBJECT_ID = 7
BrickRED::ERROR_CODE_NO_FREE_OBJECT_ID = 8
BrickRED::ERROR_CODE_OBJECT_IS_LOCKED = 9
BrickRED::ERROR_CODE_NO_MORE_DATA = 10
BrickRED::ERROR_CODE_WRONG_LIST_ITEM_TYPE = 11
BrickRED::ERROR_CODE_PROGRAM_IS_PURGED = 12
BrickRED::ERROR_CODE_INVALID_PARAMETER = 128
BrickRED::ERROR_CODE_NO_FREE_MEMORY = 129
BrickRED::ERROR_CODE_NO_FREE_SPACE = 130
BrickRED::ERROR_CODE_ACCESS_DENIED = 121
BrickRED::ERROR_CODE_ALREADY_EXISTS = 132
BrickRED::ERROR_CODE_DOES_NOT_EXIST = 133
BrickRED::ERROR_CODE_INTERRUPTED = 134
BrickRED::ERROR_CODE_IS_DIRECTORY = 135
BrickRED::ERROR_CODE_NOT_A_DIRECTORY = 136
BrickRED::ERROR_CODE_WOULD_BLOCK = 137
BrickRED::ERROR_CODE_OVERFLOW = 138
BrickRED::ERROR_CODE_BAD_FILE_DESCRIPTOR = 139
BrickRED::ERROR_CODE_OUT_OF_RANGE = 140
BrickRED::ERROR_CODE_NAME_TOO_LONG = 141
BrickRED::ERROR_CODE_INVALID_SEEK = 142
BrickRED::ERROR_CODE_NOT_SUPPORTED = 143
BrickRED::ERROR_CODE_TOO_MANY_OPEN_FILES = 144

BrickRED#get_process_stdio(process_id, session_id) → [int, int, int, int]¶

Parameters:	process_id – Type: int, Range: [0 to 2¹⁶ - 1] session_id – Type: int, Range: [0 to 2¹⁶ - 1]
Return Array:	0: error_code – Type: int, Range: See constants 1: stdin_file_id – Type: int, Range: [0 to 2¹⁶ - 1] 2: stdout_file_id – Type: int, Range: [0 to 2¹⁶ - 1] 3: stderr_file_id – Type: int, Range: [0 to 2¹⁶ - 1]

Returns the stdin, stdout and stderr files used to spawn a process object, as passed to #spawn_process, and the resulting error code.

The following constants are available for this function:

For error_code:

BrickRED::ERROR_CODE_SUCCESS = 0
BrickRED::ERROR_CODE_UNKNOWN_ERROR = 1
BrickRED::ERROR_CODE_INVALID_OPERATION = 2
BrickRED::ERROR_CODE_OPERATION_ABORTED = 3
BrickRED::ERROR_CODE_INTERNAL_ERROR = 4
BrickRED::ERROR_CODE_UNKNOWN_SESSION_ID = 5
BrickRED::ERROR_CODE_NO_FREE_SESSION_ID = 6
BrickRED::ERROR_CODE_UNKNOWN_OBJECT_ID = 7
BrickRED::ERROR_CODE_NO_FREE_OBJECT_ID = 8
BrickRED::ERROR_CODE_OBJECT_IS_LOCKED = 9
BrickRED::ERROR_CODE_NO_MORE_DATA = 10
BrickRED::ERROR_CODE_WRONG_LIST_ITEM_TYPE = 11
BrickRED::ERROR_CODE_PROGRAM_IS_PURGED = 12
BrickRED::ERROR_CODE_INVALID_PARAMETER = 128
BrickRED::ERROR_CODE_NO_FREE_MEMORY = 129
BrickRED::ERROR_CODE_NO_FREE_SPACE = 130
BrickRED::ERROR_CODE_ACCESS_DENIED = 121
BrickRED::ERROR_CODE_ALREADY_EXISTS = 132
BrickRED::ERROR_CODE_DOES_NOT_EXIST = 133
BrickRED::ERROR_CODE_INTERRUPTED = 134
BrickRED::ERROR_CODE_IS_DIRECTORY = 135
BrickRED::ERROR_CODE_NOT_A_DIRECTORY = 136
BrickRED::ERROR_CODE_WOULD_BLOCK = 137
BrickRED::ERROR_CODE_OVERFLOW = 138
BrickRED::ERROR_CODE_BAD_FILE_DESCRIPTOR = 139
BrickRED::ERROR_CODE_OUT_OF_RANGE = 140
BrickRED::ERROR_CODE_NAME_TOO_LONG = 141
BrickRED::ERROR_CODE_INVALID_SEEK = 142
BrickRED::ERROR_CODE_NOT_SUPPORTED = 143
BrickRED::ERROR_CODE_TOO_MANY_OPEN_FILES = 144

BrickRED#get_process_state(process_id) → [int, int, int, int]¶

Parameters:	process_id – Type: int, Range: [0 to 2¹⁶ - 1]
Return Array:	0: error_code – Type: int, Range: See constants 1: state – Type: int, Range: See constants 2: timestamp – Type: int, Range: [0 to 2⁶⁴ - 1] 3: exit_code – Type: int, Range: [0 to 255]

Returns the current state, timestamp and exit code of a process object, and the resulting error code.

Possible process states are:

Unknown = 0
Running = 1
Error = 2
Exited = 3
Killed = 4
Stopped = 5

The timestamp represents the UNIX time since when the process is in its current state.

The exit code is only valid if the state is Error, Exited, Killed or Stopped and has different meanings depending on the state:

Error: error code for error occurred while spawning the process (see below)
Exited: exit status of the process
Killed: UNIX signal number used to kill the process
Stopped: UNIX signal number used to stop the process

Possible exit/error codes in Error state are:

InternalError = 125
CannotExecute = 126
DoesNotExist = 127

The CannotExecute error can be caused by the executable being opened for writing.

The following constants are available for this function:

For error_code:

BrickRED::ERROR_CODE_SUCCESS = 0
BrickRED::ERROR_CODE_UNKNOWN_ERROR = 1
BrickRED::ERROR_CODE_INVALID_OPERATION = 2
BrickRED::ERROR_CODE_OPERATION_ABORTED = 3
BrickRED::ERROR_CODE_INTERNAL_ERROR = 4
BrickRED::ERROR_CODE_UNKNOWN_SESSION_ID = 5
BrickRED::ERROR_CODE_NO_FREE_SESSION_ID = 6
BrickRED::ERROR_CODE_UNKNOWN_OBJECT_ID = 7
BrickRED::ERROR_CODE_NO_FREE_OBJECT_ID = 8
BrickRED::ERROR_CODE_OBJECT_IS_LOCKED = 9
BrickRED::ERROR_CODE_NO_MORE_DATA = 10
BrickRED::ERROR_CODE_WRONG_LIST_ITEM_TYPE = 11
BrickRED::ERROR_CODE_PROGRAM_IS_PURGED = 12
BrickRED::ERROR_CODE_INVALID_PARAMETER = 128
BrickRED::ERROR_CODE_NO_FREE_MEMORY = 129
BrickRED::ERROR_CODE_NO_FREE_SPACE = 130
BrickRED::ERROR_CODE_ACCESS_DENIED = 121
BrickRED::ERROR_CODE_ALREADY_EXISTS = 132
BrickRED::ERROR_CODE_DOES_NOT_EXIST = 133
BrickRED::ERROR_CODE_INTERRUPTED = 134
BrickRED::ERROR_CODE_IS_DIRECTORY = 135
BrickRED::ERROR_CODE_NOT_A_DIRECTORY = 136
BrickRED::ERROR_CODE_WOULD_BLOCK = 137
BrickRED::ERROR_CODE_OVERFLOW = 138
BrickRED::ERROR_CODE_BAD_FILE_DESCRIPTOR = 139
BrickRED::ERROR_CODE_OUT_OF_RANGE = 140
BrickRED::ERROR_CODE_NAME_TOO_LONG = 141
BrickRED::ERROR_CODE_INVALID_SEEK = 142
BrickRED::ERROR_CODE_NOT_SUPPORTED = 143
BrickRED::ERROR_CODE_TOO_MANY_OPEN_FILES = 144

For state:

BrickRED::PROCESS_STATE_UNKNOWN = 0
BrickRED::PROCESS_STATE_RUNNING = 1
BrickRED::PROCESS_STATE_ERROR = 2
BrickRED::PROCESS_STATE_EXITED = 3
BrickRED::PROCESS_STATE_KILLED = 4
BrickRED::PROCESS_STATE_STOPPED = 5

BrickRED#get_programs(session_id) → [int, int]¶

Parameters:	session_id – Type: int, Range: [0 to 2¹⁶ - 1]
Return Array:	0: error_code – Type: int, Range: See constants 1: programs_list_id – Type: int, Range: [0 to 2¹⁶ - 1]

The following constants are available for this function:

For error_code:

BrickRED::ERROR_CODE_SUCCESS = 0
BrickRED::ERROR_CODE_UNKNOWN_ERROR = 1
BrickRED::ERROR_CODE_INVALID_OPERATION = 2
BrickRED::ERROR_CODE_OPERATION_ABORTED = 3
BrickRED::ERROR_CODE_INTERNAL_ERROR = 4
BrickRED::ERROR_CODE_UNKNOWN_SESSION_ID = 5
BrickRED::ERROR_CODE_NO_FREE_SESSION_ID = 6
BrickRED::ERROR_CODE_UNKNOWN_OBJECT_ID = 7
BrickRED::ERROR_CODE_NO_FREE_OBJECT_ID = 8
BrickRED::ERROR_CODE_OBJECT_IS_LOCKED = 9
BrickRED::ERROR_CODE_NO_MORE_DATA = 10
BrickRED::ERROR_CODE_WRONG_LIST_ITEM_TYPE = 11
BrickRED::ERROR_CODE_PROGRAM_IS_PURGED = 12
BrickRED::ERROR_CODE_INVALID_PARAMETER = 128
BrickRED::ERROR_CODE_NO_FREE_MEMORY = 129
BrickRED::ERROR_CODE_NO_FREE_SPACE = 130
BrickRED::ERROR_CODE_ACCESS_DENIED = 121
BrickRED::ERROR_CODE_ALREADY_EXISTS = 132
BrickRED::ERROR_CODE_DOES_NOT_EXIST = 133
BrickRED::ERROR_CODE_INTERRUPTED = 134
BrickRED::ERROR_CODE_IS_DIRECTORY = 135
BrickRED::ERROR_CODE_NOT_A_DIRECTORY = 136
BrickRED::ERROR_CODE_WOULD_BLOCK = 137
BrickRED::ERROR_CODE_OVERFLOW = 138
BrickRED::ERROR_CODE_BAD_FILE_DESCRIPTOR = 139
BrickRED::ERROR_CODE_OUT_OF_RANGE = 140
BrickRED::ERROR_CODE_NAME_TOO_LONG = 141
BrickRED::ERROR_CODE_INVALID_SEEK = 142
BrickRED::ERROR_CODE_NOT_SUPPORTED = 143
BrickRED::ERROR_CODE_TOO_MANY_OPEN_FILES = 144

BrickRED#define_program(identifier_string_id, session_id) → [int, int]¶

Parameters:	identifier_string_id – Type: int, Range: [0 to 2¹⁶ - 1] session_id – Type: int, Range: [0 to 2¹⁶ - 1]
Return Array:	0: error_code – Type: int, Range: See constants 1: program_id – Type: int, Range: [0 to 2¹⁶ - 1]

The following constants are available for this function:

For error_code:

BrickRED::ERROR_CODE_SUCCESS = 0
BrickRED::ERROR_CODE_UNKNOWN_ERROR = 1
BrickRED::ERROR_CODE_INVALID_OPERATION = 2
BrickRED::ERROR_CODE_OPERATION_ABORTED = 3
BrickRED::ERROR_CODE_INTERNAL_ERROR = 4
BrickRED::ERROR_CODE_UNKNOWN_SESSION_ID = 5
BrickRED::ERROR_CODE_NO_FREE_SESSION_ID = 6
BrickRED::ERROR_CODE_UNKNOWN_OBJECT_ID = 7
BrickRED::ERROR_CODE_NO_FREE_OBJECT_ID = 8
BrickRED::ERROR_CODE_OBJECT_IS_LOCKED = 9
BrickRED::ERROR_CODE_NO_MORE_DATA = 10
BrickRED::ERROR_CODE_WRONG_LIST_ITEM_TYPE = 11
BrickRED::ERROR_CODE_PROGRAM_IS_PURGED = 12
BrickRED::ERROR_CODE_INVALID_PARAMETER = 128
BrickRED::ERROR_CODE_NO_FREE_MEMORY = 129
BrickRED::ERROR_CODE_NO_FREE_SPACE = 130
BrickRED::ERROR_CODE_ACCESS_DENIED = 121
BrickRED::ERROR_CODE_ALREADY_EXISTS = 132
BrickRED::ERROR_CODE_DOES_NOT_EXIST = 133
BrickRED::ERROR_CODE_INTERRUPTED = 134
BrickRED::ERROR_CODE_IS_DIRECTORY = 135
BrickRED::ERROR_CODE_NOT_A_DIRECTORY = 136
BrickRED::ERROR_CODE_WOULD_BLOCK = 137
BrickRED::ERROR_CODE_OVERFLOW = 138
BrickRED::ERROR_CODE_BAD_FILE_DESCRIPTOR = 139
BrickRED::ERROR_CODE_OUT_OF_RANGE = 140
BrickRED::ERROR_CODE_NAME_TOO_LONG = 141
BrickRED::ERROR_CODE_INVALID_SEEK = 142
BrickRED::ERROR_CODE_NOT_SUPPORTED = 143
BrickRED::ERROR_CODE_TOO_MANY_OPEN_FILES = 144

BrickRED#purge_program(program_id, cookie) → int¶

Parameters:	program_id – Type: int, Range: [0 to 2¹⁶ - 1] cookie – Type: int, Range: [0 to 2³² - 1]
Returns:	error_code – Type: int, Range: See constants

The following constants are available for this function:

For error_code:

BrickRED::ERROR_CODE_SUCCESS = 0
BrickRED::ERROR_CODE_UNKNOWN_ERROR = 1
BrickRED::ERROR_CODE_INVALID_OPERATION = 2
BrickRED::ERROR_CODE_OPERATION_ABORTED = 3
BrickRED::ERROR_CODE_INTERNAL_ERROR = 4
BrickRED::ERROR_CODE_UNKNOWN_SESSION_ID = 5
BrickRED::ERROR_CODE_NO_FREE_SESSION_ID = 6
BrickRED::ERROR_CODE_UNKNOWN_OBJECT_ID = 7
BrickRED::ERROR_CODE_NO_FREE_OBJECT_ID = 8
BrickRED::ERROR_CODE_OBJECT_IS_LOCKED = 9
BrickRED::ERROR_CODE_NO_MORE_DATA = 10
BrickRED::ERROR_CODE_WRONG_LIST_ITEM_TYPE = 11
BrickRED::ERROR_CODE_PROGRAM_IS_PURGED = 12
BrickRED::ERROR_CODE_INVALID_PARAMETER = 128
BrickRED::ERROR_CODE_NO_FREE_MEMORY = 129
BrickRED::ERROR_CODE_NO_FREE_SPACE = 130
BrickRED::ERROR_CODE_ACCESS_DENIED = 121
BrickRED::ERROR_CODE_ALREADY_EXISTS = 132
BrickRED::ERROR_CODE_DOES_NOT_EXIST = 133
BrickRED::ERROR_CODE_INTERRUPTED = 134
BrickRED::ERROR_CODE_IS_DIRECTORY = 135
BrickRED::ERROR_CODE_NOT_A_DIRECTORY = 136
BrickRED::ERROR_CODE_WOULD_BLOCK = 137
BrickRED::ERROR_CODE_OVERFLOW = 138
BrickRED::ERROR_CODE_BAD_FILE_DESCRIPTOR = 139
BrickRED::ERROR_CODE_OUT_OF_RANGE = 140
BrickRED::ERROR_CODE_NAME_TOO_LONG = 141
BrickRED::ERROR_CODE_INVALID_SEEK = 142
BrickRED::ERROR_CODE_NOT_SUPPORTED = 143
BrickRED::ERROR_CODE_TOO_MANY_OPEN_FILES = 144

BrickRED#get_program_identifier(program_id, session_id) → [int, int]¶

Parameters:	program_id – Type: int, Range: [0 to 2¹⁶ - 1] session_id – Type: int, Range: [0 to 2¹⁶ - 1]
Return Array:	0: error_code – Type: int, Range: See constants 1: identifier_string_id – Type: int, Range: [0 to 2¹⁶ - 1]

The following constants are available for this function:

For error_code:

BrickRED::ERROR_CODE_SUCCESS = 0
BrickRED::ERROR_CODE_UNKNOWN_ERROR = 1
BrickRED::ERROR_CODE_INVALID_OPERATION = 2
BrickRED::ERROR_CODE_OPERATION_ABORTED = 3
BrickRED::ERROR_CODE_INTERNAL_ERROR = 4
BrickRED::ERROR_CODE_UNKNOWN_SESSION_ID = 5
BrickRED::ERROR_CODE_NO_FREE_SESSION_ID = 6
BrickRED::ERROR_CODE_UNKNOWN_OBJECT_ID = 7
BrickRED::ERROR_CODE_NO_FREE_OBJECT_ID = 8
BrickRED::ERROR_CODE_OBJECT_IS_LOCKED = 9
BrickRED::ERROR_CODE_NO_MORE_DATA = 10
BrickRED::ERROR_CODE_WRONG_LIST_ITEM_TYPE = 11
BrickRED::ERROR_CODE_PROGRAM_IS_PURGED = 12
BrickRED::ERROR_CODE_INVALID_PARAMETER = 128
BrickRED::ERROR_CODE_NO_FREE_MEMORY = 129
BrickRED::ERROR_CODE_NO_FREE_SPACE = 130
BrickRED::ERROR_CODE_ACCESS_DENIED = 121
BrickRED::ERROR_CODE_ALREADY_EXISTS = 132
BrickRED::ERROR_CODE_DOES_NOT_EXIST = 133
BrickRED::ERROR_CODE_INTERRUPTED = 134
BrickRED::ERROR_CODE_IS_DIRECTORY = 135
BrickRED::ERROR_CODE_NOT_A_DIRECTORY = 136
BrickRED::ERROR_CODE_WOULD_BLOCK = 137
BrickRED::ERROR_CODE_OVERFLOW = 138
BrickRED::ERROR_CODE_BAD_FILE_DESCRIPTOR = 139
BrickRED::ERROR_CODE_OUT_OF_RANGE = 140
BrickRED::ERROR_CODE_NAME_TOO_LONG = 141
BrickRED::ERROR_CODE_INVALID_SEEK = 142
BrickRED::ERROR_CODE_NOT_SUPPORTED = 143
BrickRED::ERROR_CODE_TOO_MANY_OPEN_FILES = 144

BrickRED#get_program_root_directory(program_id, session_id) → [int, int]¶

Parameters:	program_id – Type: int, Range: [0 to 2¹⁶ - 1] session_id – Type: int, Range: [0 to 2¹⁶ - 1]
Return Array:	0: error_code – Type: int, Range: See constants 1: root_directory_string_id – Type: int, Range: [0 to 2¹⁶ - 1]

FIXME: root directory is absolute: <home>/programs/<identifier>

The following constants are available for this function:

For error_code:

BrickRED::ERROR_CODE_SUCCESS = 0
BrickRED::ERROR_CODE_UNKNOWN_ERROR = 1
BrickRED::ERROR_CODE_INVALID_OPERATION = 2
BrickRED::ERROR_CODE_OPERATION_ABORTED = 3
BrickRED::ERROR_CODE_INTERNAL_ERROR = 4
BrickRED::ERROR_CODE_UNKNOWN_SESSION_ID = 5
BrickRED::ERROR_CODE_NO_FREE_SESSION_ID = 6
BrickRED::ERROR_CODE_UNKNOWN_OBJECT_ID = 7
BrickRED::ERROR_CODE_NO_FREE_OBJECT_ID = 8
BrickRED::ERROR_CODE_OBJECT_IS_LOCKED = 9
BrickRED::ERROR_CODE_NO_MORE_DATA = 10
BrickRED::ERROR_CODE_WRONG_LIST_ITEM_TYPE = 11
BrickRED::ERROR_CODE_PROGRAM_IS_PURGED = 12
BrickRED::ERROR_CODE_INVALID_PARAMETER = 128
BrickRED::ERROR_CODE_NO_FREE_MEMORY = 129
BrickRED::ERROR_CODE_NO_FREE_SPACE = 130
BrickRED::ERROR_CODE_ACCESS_DENIED = 121
BrickRED::ERROR_CODE_ALREADY_EXISTS = 132
BrickRED::ERROR_CODE_DOES_NOT_EXIST = 133
BrickRED::ERROR_CODE_INTERRUPTED = 134
BrickRED::ERROR_CODE_IS_DIRECTORY = 135
BrickRED::ERROR_CODE_NOT_A_DIRECTORY = 136
BrickRED::ERROR_CODE_WOULD_BLOCK = 137
BrickRED::ERROR_CODE_OVERFLOW = 138
BrickRED::ERROR_CODE_BAD_FILE_DESCRIPTOR = 139
BrickRED::ERROR_CODE_OUT_OF_RANGE = 140
BrickRED::ERROR_CODE_NAME_TOO_LONG = 141
BrickRED::ERROR_CODE_INVALID_SEEK = 142
BrickRED::ERROR_CODE_NOT_SUPPORTED = 143
BrickRED::ERROR_CODE_TOO_MANY_OPEN_FILES = 144

BrickRED#set_program_command(program_id, executable_string_id, arguments_list_id, environment_list_id, working_directory_string_id) → int¶

Parameters:	program_id – Type: int, Range: [0 to 2¹⁶ - 1] executable_string_id – Type: int, Range: [0 to 2¹⁶ - 1] arguments_list_id – Type: int, Range: [0 to 2¹⁶ - 1] environment_list_id – Type: int, Range: [0 to 2¹⁶ - 1] working_directory_string_id – Type: int, Range: [0 to 2¹⁶ - 1]
Returns:	error_code – Type: int, Range: See constants

FIXME: working directory is relative to <home>/programs/<identifier>/bin

The following constants are available for this function:

For error_code:

BrickRED::ERROR_CODE_SUCCESS = 0
BrickRED::ERROR_CODE_UNKNOWN_ERROR = 1
BrickRED::ERROR_CODE_INVALID_OPERATION = 2
BrickRED::ERROR_CODE_OPERATION_ABORTED = 3
BrickRED::ERROR_CODE_INTERNAL_ERROR = 4
BrickRED::ERROR_CODE_UNKNOWN_SESSION_ID = 5
BrickRED::ERROR_CODE_NO_FREE_SESSION_ID = 6
BrickRED::ERROR_CODE_UNKNOWN_OBJECT_ID = 7
BrickRED::ERROR_CODE_NO_FREE_OBJECT_ID = 8
BrickRED::ERROR_CODE_OBJECT_IS_LOCKED = 9
BrickRED::ERROR_CODE_NO_MORE_DATA = 10
BrickRED::ERROR_CODE_WRONG_LIST_ITEM_TYPE = 11
BrickRED::ERROR_CODE_PROGRAM_IS_PURGED = 12
BrickRED::ERROR_CODE_INVALID_PARAMETER = 128
BrickRED::ERROR_CODE_NO_FREE_MEMORY = 129
BrickRED::ERROR_CODE_NO_FREE_SPACE = 130
BrickRED::ERROR_CODE_ACCESS_DENIED = 121
BrickRED::ERROR_CODE_ALREADY_EXISTS = 132
BrickRED::ERROR_CODE_DOES_NOT_EXIST = 133
BrickRED::ERROR_CODE_INTERRUPTED = 134
BrickRED::ERROR_CODE_IS_DIRECTORY = 135
BrickRED::ERROR_CODE_NOT_A_DIRECTORY = 136
BrickRED::ERROR_CODE_WOULD_BLOCK = 137
BrickRED::ERROR_CODE_OVERFLOW = 138
BrickRED::ERROR_CODE_BAD_FILE_DESCRIPTOR = 139
BrickRED::ERROR_CODE_OUT_OF_RANGE = 140
BrickRED::ERROR_CODE_NAME_TOO_LONG = 141
BrickRED::ERROR_CODE_INVALID_SEEK = 142
BrickRED::ERROR_CODE_NOT_SUPPORTED = 143
BrickRED::ERROR_CODE_TOO_MANY_OPEN_FILES = 144

BrickRED#get_program_command(program_id, session_id) → [int, int, int, int, int]¶

Parameters:	program_id – Type: int, Range: [0 to 2¹⁶ - 1] session_id – Type: int, Range: [0 to 2¹⁶ - 1]
Return Array:	0: error_code – Type: int, Range: See constants 1: executable_string_id – Type: int, Range: [0 to 2¹⁶ - 1] 2: arguments_list_id – Type: int, Range: [0 to 2¹⁶ - 1] 3: environment_list_id – Type: int, Range: [0 to 2¹⁶ - 1] 4: working_directory_string_id – Type: int, Range: [0 to 2¹⁶ - 1]

FIXME: working directory is relative to <home>/programs/<identifier>/bin

The following constants are available for this function:

For error_code:

BrickRED::ERROR_CODE_SUCCESS = 0
BrickRED::ERROR_CODE_UNKNOWN_ERROR = 1
BrickRED::ERROR_CODE_INVALID_OPERATION = 2
BrickRED::ERROR_CODE_OPERATION_ABORTED = 3
BrickRED::ERROR_CODE_INTERNAL_ERROR = 4
BrickRED::ERROR_CODE_UNKNOWN_SESSION_ID = 5
BrickRED::ERROR_CODE_NO_FREE_SESSION_ID = 6
BrickRED::ERROR_CODE_UNKNOWN_OBJECT_ID = 7
BrickRED::ERROR_CODE_NO_FREE_OBJECT_ID = 8
BrickRED::ERROR_CODE_OBJECT_IS_LOCKED = 9
BrickRED::ERROR_CODE_NO_MORE_DATA = 10
BrickRED::ERROR_CODE_WRONG_LIST_ITEM_TYPE = 11
BrickRED::ERROR_CODE_PROGRAM_IS_PURGED = 12
BrickRED::ERROR_CODE_INVALID_PARAMETER = 128
BrickRED::ERROR_CODE_NO_FREE_MEMORY = 129
BrickRED::ERROR_CODE_NO_FREE_SPACE = 130
BrickRED::ERROR_CODE_ACCESS_DENIED = 121
BrickRED::ERROR_CODE_ALREADY_EXISTS = 132
BrickRED::ERROR_CODE_DOES_NOT_EXIST = 133
BrickRED::ERROR_CODE_INTERRUPTED = 134
BrickRED::ERROR_CODE_IS_DIRECTORY = 135
BrickRED::ERROR_CODE_NOT_A_DIRECTORY = 136
BrickRED::ERROR_CODE_WOULD_BLOCK = 137
BrickRED::ERROR_CODE_OVERFLOW = 138
BrickRED::ERROR_CODE_BAD_FILE_DESCRIPTOR = 139
BrickRED::ERROR_CODE_OUT_OF_RANGE = 140
BrickRED::ERROR_CODE_NAME_TOO_LONG = 141
BrickRED::ERROR_CODE_INVALID_SEEK = 142
BrickRED::ERROR_CODE_NOT_SUPPORTED = 143
BrickRED::ERROR_CODE_TOO_MANY_OPEN_FILES = 144

BrickRED#set_program_stdio_redirection(program_id, stdin_redirection, stdin_file_name_string_id, stdout_redirection, stdout_file_name_string_id, stderr_redirection, stderr_file_name_string_id) → int¶

Parameters:

Parameters:	program_id – Type: int, Range: [0 to 2¹⁶ - 1] stdin_redirection – Type: int, Range: See constants stdin_file_name_string_id – Type: int, Range: [0 to 2¹⁶ - 1] stdout_redirection – Type: int, Range: See constants stdout_file_name_string_id – Type: int, Range: [0 to 2¹⁶ - 1] stderr_redirection – Type: int, Range: See constants stderr_file_name_string_id – Type: int, Range: [0 to 2¹⁶ - 1]
Returns:	error_code – Type: int, Range: See constants

program_id – Type: int, Range: [0 to 2¹⁶ - 1]
stdin_redirection – Type: int, Range: See constants
stdin_file_name_string_id – Type: int, Range: [0 to 2¹⁶ - 1]
stdout_redirection – Type: int, Range: See constants
stdout_file_name_string_id – Type: int, Range: [0 to 2¹⁶ - 1]
stderr_redirection – Type: int, Range: See constants
stderr_file_name_string_id – Type: int, Range: [0 to 2¹⁶ - 1]

Returns:

error_code – Type: int, Range: See constants

FIXME: stdio file names are relative to <home>/programs/<identifier>/bin

The following constants are available for this function:

For stdin_redirection:

BrickRED::PROGRAM_STDIO_REDIRECTION_DEV_NULL = 0
BrickRED::PROGRAM_STDIO_REDIRECTION_PIPE = 1
BrickRED::PROGRAM_STDIO_REDIRECTION_FILE = 2
BrickRED::PROGRAM_STDIO_REDIRECTION_INDIVIDUAL_LOG = 3
BrickRED::PROGRAM_STDIO_REDIRECTION_CONTINUOUS_LOG = 4
BrickRED::PROGRAM_STDIO_REDIRECTION_STDOUT = 5

For stdout_redirection:

BrickRED::PROGRAM_STDIO_REDIRECTION_DEV_NULL = 0
BrickRED::PROGRAM_STDIO_REDIRECTION_PIPE = 1
BrickRED::PROGRAM_STDIO_REDIRECTION_FILE = 2
BrickRED::PROGRAM_STDIO_REDIRECTION_INDIVIDUAL_LOG = 3
BrickRED::PROGRAM_STDIO_REDIRECTION_CONTINUOUS_LOG = 4
BrickRED::PROGRAM_STDIO_REDIRECTION_STDOUT = 5

For stderr_redirection:

BrickRED::PROGRAM_STDIO_REDIRECTION_DEV_NULL = 0
BrickRED::PROGRAM_STDIO_REDIRECTION_PIPE = 1
BrickRED::PROGRAM_STDIO_REDIRECTION_FILE = 2
BrickRED::PROGRAM_STDIO_REDIRECTION_INDIVIDUAL_LOG = 3
BrickRED::PROGRAM_STDIO_REDIRECTION_CONTINUOUS_LOG = 4
BrickRED::PROGRAM_STDIO_REDIRECTION_STDOUT = 5

For error_code:

BrickRED::ERROR_CODE_SUCCESS = 0
BrickRED::ERROR_CODE_UNKNOWN_ERROR = 1
BrickRED::ERROR_CODE_INVALID_OPERATION = 2
BrickRED::ERROR_CODE_OPERATION_ABORTED = 3
BrickRED::ERROR_CODE_INTERNAL_ERROR = 4
BrickRED::ERROR_CODE_UNKNOWN_SESSION_ID = 5
BrickRED::ERROR_CODE_NO_FREE_SESSION_ID = 6
BrickRED::ERROR_CODE_UNKNOWN_OBJECT_ID = 7
BrickRED::ERROR_CODE_NO_FREE_OBJECT_ID = 8
BrickRED::ERROR_CODE_OBJECT_IS_LOCKED = 9
BrickRED::ERROR_CODE_NO_MORE_DATA = 10
BrickRED::ERROR_CODE_WRONG_LIST_ITEM_TYPE = 11
BrickRED::ERROR_CODE_PROGRAM_IS_PURGED = 12
BrickRED::ERROR_CODE_INVALID_PARAMETER = 128
BrickRED::ERROR_CODE_NO_FREE_MEMORY = 129
BrickRED::ERROR_CODE_NO_FREE_SPACE = 130
BrickRED::ERROR_CODE_ACCESS_DENIED = 121
BrickRED::ERROR_CODE_ALREADY_EXISTS = 132
BrickRED::ERROR_CODE_DOES_NOT_EXIST = 133
BrickRED::ERROR_CODE_INTERRUPTED = 134
BrickRED::ERROR_CODE_IS_DIRECTORY = 135
BrickRED::ERROR_CODE_NOT_A_DIRECTORY = 136
BrickRED::ERROR_CODE_WOULD_BLOCK = 137
BrickRED::ERROR_CODE_OVERFLOW = 138
BrickRED::ERROR_CODE_BAD_FILE_DESCRIPTOR = 139
BrickRED::ERROR_CODE_OUT_OF_RANGE = 140
BrickRED::ERROR_CODE_NAME_TOO_LONG = 141
BrickRED::ERROR_CODE_INVALID_SEEK = 142
BrickRED::ERROR_CODE_NOT_SUPPORTED = 143
BrickRED::ERROR_CODE_TOO_MANY_OPEN_FILES = 144

BrickRED#get_program_stdio_redirection(program_id, session_id) → [int, int, int, int, int, int, int]¶

Parameters:

program_id – Type: int, Range: [0 to 2¹⁶ - 1]
session_id – Type: int, Range: [0 to 2¹⁶ - 1]

Return Array:

0: error_code – Type: int, Range: See constants
1: stdin_redirection – Type: int, Range: See constants
2: stdin_file_name_string_id – Type: int, Range: [0 to 2¹⁶ - 1]
3: stdout_redirection – Type: int, Range: See constants
4: stdout_file_name_string_id – Type: int, Range: [0 to 2¹⁶ - 1]
5: stderr_redirection – Type: int, Range: See constants
6: stderr_file_name_string_id – Type: int, Range: [0 to 2¹⁶ - 1]

FIXME: stdio file names are relative to <home>/programs/<identifier>/bin

The following constants are available for this function:

For error_code:

BrickRED::ERROR_CODE_SUCCESS = 0
BrickRED::ERROR_CODE_UNKNOWN_ERROR = 1
BrickRED::ERROR_CODE_INVALID_OPERATION = 2
BrickRED::ERROR_CODE_OPERATION_ABORTED = 3
BrickRED::ERROR_CODE_INTERNAL_ERROR = 4
BrickRED::ERROR_CODE_UNKNOWN_SESSION_ID = 5
BrickRED::ERROR_CODE_NO_FREE_SESSION_ID = 6
BrickRED::ERROR_CODE_UNKNOWN_OBJECT_ID = 7
BrickRED::ERROR_CODE_NO_FREE_OBJECT_ID = 8
BrickRED::ERROR_CODE_OBJECT_IS_LOCKED = 9
BrickRED::ERROR_CODE_NO_MORE_DATA = 10
BrickRED::ERROR_CODE_WRONG_LIST_ITEM_TYPE = 11
BrickRED::ERROR_CODE_PROGRAM_IS_PURGED = 12
BrickRED::ERROR_CODE_INVALID_PARAMETER = 128
BrickRED::ERROR_CODE_NO_FREE_MEMORY = 129
BrickRED::ERROR_CODE_NO_FREE_SPACE = 130
BrickRED::ERROR_CODE_ACCESS_DENIED = 121
BrickRED::ERROR_CODE_ALREADY_EXISTS = 132
BrickRED::ERROR_CODE_DOES_NOT_EXIST = 133
BrickRED::ERROR_CODE_INTERRUPTED = 134
BrickRED::ERROR_CODE_IS_DIRECTORY = 135
BrickRED::ERROR_CODE_NOT_A_DIRECTORY = 136
BrickRED::ERROR_CODE_WOULD_BLOCK = 137
BrickRED::ERROR_CODE_OVERFLOW = 138
BrickRED::ERROR_CODE_BAD_FILE_DESCRIPTOR = 139
BrickRED::ERROR_CODE_OUT_OF_RANGE = 140
BrickRED::ERROR_CODE_NAME_TOO_LONG = 141
BrickRED::ERROR_CODE_INVALID_SEEK = 142
BrickRED::ERROR_CODE_NOT_SUPPORTED = 143
BrickRED::ERROR_CODE_TOO_MANY_OPEN_FILES = 144

For stdin_redirection:

BrickRED::PROGRAM_STDIO_REDIRECTION_DEV_NULL = 0
BrickRED::PROGRAM_STDIO_REDIRECTION_PIPE = 1
BrickRED::PROGRAM_STDIO_REDIRECTION_FILE = 2
BrickRED::PROGRAM_STDIO_REDIRECTION_INDIVIDUAL_LOG = 3
BrickRED::PROGRAM_STDIO_REDIRECTION_CONTINUOUS_LOG = 4
BrickRED::PROGRAM_STDIO_REDIRECTION_STDOUT = 5

For stdout_redirection:

BrickRED::PROGRAM_STDIO_REDIRECTION_DEV_NULL = 0
BrickRED::PROGRAM_STDIO_REDIRECTION_PIPE = 1
BrickRED::PROGRAM_STDIO_REDIRECTION_FILE = 2
BrickRED::PROGRAM_STDIO_REDIRECTION_INDIVIDUAL_LOG = 3
BrickRED::PROGRAM_STDIO_REDIRECTION_CONTINUOUS_LOG = 4
BrickRED::PROGRAM_STDIO_REDIRECTION_STDOUT = 5

For stderr_redirection:

BrickRED::PROGRAM_STDIO_REDIRECTION_DEV_NULL = 0
BrickRED::PROGRAM_STDIO_REDIRECTION_PIPE = 1
BrickRED::PROGRAM_STDIO_REDIRECTION_FILE = 2
BrickRED::PROGRAM_STDIO_REDIRECTION_INDIVIDUAL_LOG = 3
BrickRED::PROGRAM_STDIO_REDIRECTION_CONTINUOUS_LOG = 4
BrickRED::PROGRAM_STDIO_REDIRECTION_STDOUT = 5

BrickRED#set_program_schedule(program_id, start_mode, continue_after_error, start_interval, start_fields_string_id) → int¶

Parameters:	program_id – Type: int, Range: [0 to 2¹⁶ - 1] start_mode – Type: int, Range: See constants continue_after_error – Type: bool start_interval – Type: int, Range: [0 to 2³² - 1] start_fields_string_id – Type: int, Range: [0 to 2¹⁶ - 1]
Returns:	error_code – Type: int, Range: See constants

The following constants are available for this function:

For start_mode:

BrickRED::PROGRAM_START_MODE_NEVER = 0
BrickRED::PROGRAM_START_MODE_ALWAYS = 1
BrickRED::PROGRAM_START_MODE_INTERVAL = 2
BrickRED::PROGRAM_START_MODE_CRON = 3

For error_code:

BrickRED::ERROR_CODE_SUCCESS = 0
BrickRED::ERROR_CODE_UNKNOWN_ERROR = 1
BrickRED::ERROR_CODE_INVALID_OPERATION = 2
BrickRED::ERROR_CODE_OPERATION_ABORTED = 3
BrickRED::ERROR_CODE_INTERNAL_ERROR = 4
BrickRED::ERROR_CODE_UNKNOWN_SESSION_ID = 5
BrickRED::ERROR_CODE_NO_FREE_SESSION_ID = 6
BrickRED::ERROR_CODE_UNKNOWN_OBJECT_ID = 7
BrickRED::ERROR_CODE_NO_FREE_OBJECT_ID = 8
BrickRED::ERROR_CODE_OBJECT_IS_LOCKED = 9
BrickRED::ERROR_CODE_NO_MORE_DATA = 10
BrickRED::ERROR_CODE_WRONG_LIST_ITEM_TYPE = 11
BrickRED::ERROR_CODE_PROGRAM_IS_PURGED = 12
BrickRED::ERROR_CODE_INVALID_PARAMETER = 128
BrickRED::ERROR_CODE_NO_FREE_MEMORY = 129
BrickRED::ERROR_CODE_NO_FREE_SPACE = 130
BrickRED::ERROR_CODE_ACCESS_DENIED = 121
BrickRED::ERROR_CODE_ALREADY_EXISTS = 132
BrickRED::ERROR_CODE_DOES_NOT_EXIST = 133
BrickRED::ERROR_CODE_INTERRUPTED = 134
BrickRED::ERROR_CODE_IS_DIRECTORY = 135
BrickRED::ERROR_CODE_NOT_A_DIRECTORY = 136
BrickRED::ERROR_CODE_WOULD_BLOCK = 137
BrickRED::ERROR_CODE_OVERFLOW = 138
BrickRED::ERROR_CODE_BAD_FILE_DESCRIPTOR = 139
BrickRED::ERROR_CODE_OUT_OF_RANGE = 140
BrickRED::ERROR_CODE_NAME_TOO_LONG = 141
BrickRED::ERROR_CODE_INVALID_SEEK = 142
BrickRED::ERROR_CODE_NOT_SUPPORTED = 143
BrickRED::ERROR_CODE_TOO_MANY_OPEN_FILES = 144

BrickRED#get_program_schedule(program_id, session_id) → [int, int, bool, int, int]¶

Parameters:	program_id – Type: int, Range: [0 to 2¹⁶ - 1] session_id – Type: int, Range: [0 to 2¹⁶ - 1]
Return Array:	0: error_code – Type: int, Range: See constants 1: start_mode – Type: int, Range: See constants 2: continue_after_error – Type: bool 3: start_interval – Type: int, Range: [0 to 2³² - 1] 4: start_fields_string_id – Type: int, Range: [0 to 2¹⁶ - 1]

The following constants are available for this function:

For error_code:

BrickRED::ERROR_CODE_SUCCESS = 0
BrickRED::ERROR_CODE_UNKNOWN_ERROR = 1
BrickRED::ERROR_CODE_INVALID_OPERATION = 2
BrickRED::ERROR_CODE_OPERATION_ABORTED = 3
BrickRED::ERROR_CODE_INTERNAL_ERROR = 4
BrickRED::ERROR_CODE_UNKNOWN_SESSION_ID = 5
BrickRED::ERROR_CODE_NO_FREE_SESSION_ID = 6
BrickRED::ERROR_CODE_UNKNOWN_OBJECT_ID = 7
BrickRED::ERROR_CODE_NO_FREE_OBJECT_ID = 8
BrickRED::ERROR_CODE_OBJECT_IS_LOCKED = 9
BrickRED::ERROR_CODE_NO_MORE_DATA = 10
BrickRED::ERROR_CODE_WRONG_LIST_ITEM_TYPE = 11
BrickRED::ERROR_CODE_PROGRAM_IS_PURGED = 12
BrickRED::ERROR_CODE_INVALID_PARAMETER = 128
BrickRED::ERROR_CODE_NO_FREE_MEMORY = 129
BrickRED::ERROR_CODE_NO_FREE_SPACE = 130
BrickRED::ERROR_CODE_ACCESS_DENIED = 121
BrickRED::ERROR_CODE_ALREADY_EXISTS = 132
BrickRED::ERROR_CODE_DOES_NOT_EXIST = 133
BrickRED::ERROR_CODE_INTERRUPTED = 134
BrickRED::ERROR_CODE_IS_DIRECTORY = 135
BrickRED::ERROR_CODE_NOT_A_DIRECTORY = 136
BrickRED::ERROR_CODE_WOULD_BLOCK = 137
BrickRED::ERROR_CODE_OVERFLOW = 138
BrickRED::ERROR_CODE_BAD_FILE_DESCRIPTOR = 139
BrickRED::ERROR_CODE_OUT_OF_RANGE = 140
BrickRED::ERROR_CODE_NAME_TOO_LONG = 141
BrickRED::ERROR_CODE_INVALID_SEEK = 142
BrickRED::ERROR_CODE_NOT_SUPPORTED = 143
BrickRED::ERROR_CODE_TOO_MANY_OPEN_FILES = 144

For start_mode:

BrickRED::PROGRAM_START_MODE_NEVER = 0
BrickRED::PROGRAM_START_MODE_ALWAYS = 1
BrickRED::PROGRAM_START_MODE_INTERVAL = 2
BrickRED::PROGRAM_START_MODE_CRON = 3

BrickRED#get_program_scheduler_state(program_id, session_id) → [int, int, int, int]¶

Parameters:	program_id – Type: int, Range: [0 to 2¹⁶ - 1] session_id – Type: int, Range: [0 to 2¹⁶ - 1]
Return Array:	0: error_code – Type: int, Range: See constants 1: state – Type: int, Range: See constants 2: timestamp – Type: int, Range: [0 to 2⁶⁴ - 1] 3: message_string_id – Type: int, Range: [0 to 2¹⁶ - 1]

FIXME: message is currently valid in error-occurred state only

The following constants are available for this function:

For error_code:

BrickRED::ERROR_CODE_SUCCESS = 0
BrickRED::ERROR_CODE_UNKNOWN_ERROR = 1
BrickRED::ERROR_CODE_INVALID_OPERATION = 2
BrickRED::ERROR_CODE_OPERATION_ABORTED = 3
BrickRED::ERROR_CODE_INTERNAL_ERROR = 4
BrickRED::ERROR_CODE_UNKNOWN_SESSION_ID = 5
BrickRED::ERROR_CODE_NO_FREE_SESSION_ID = 6
BrickRED::ERROR_CODE_UNKNOWN_OBJECT_ID = 7
BrickRED::ERROR_CODE_NO_FREE_OBJECT_ID = 8
BrickRED::ERROR_CODE_OBJECT_IS_LOCKED = 9
BrickRED::ERROR_CODE_NO_MORE_DATA = 10
BrickRED::ERROR_CODE_WRONG_LIST_ITEM_TYPE = 11
BrickRED::ERROR_CODE_PROGRAM_IS_PURGED = 12
BrickRED::ERROR_CODE_INVALID_PARAMETER = 128
BrickRED::ERROR_CODE_NO_FREE_MEMORY = 129
BrickRED::ERROR_CODE_NO_FREE_SPACE = 130
BrickRED::ERROR_CODE_ACCESS_DENIED = 121
BrickRED::ERROR_CODE_ALREADY_EXISTS = 132
BrickRED::ERROR_CODE_DOES_NOT_EXIST = 133
BrickRED::ERROR_CODE_INTERRUPTED = 134
BrickRED::ERROR_CODE_IS_DIRECTORY = 135
BrickRED::ERROR_CODE_NOT_A_DIRECTORY = 136
BrickRED::ERROR_CODE_WOULD_BLOCK = 137
BrickRED::ERROR_CODE_OVERFLOW = 138
BrickRED::ERROR_CODE_BAD_FILE_DESCRIPTOR = 139
BrickRED::ERROR_CODE_OUT_OF_RANGE = 140
BrickRED::ERROR_CODE_NAME_TOO_LONG = 141
BrickRED::ERROR_CODE_INVALID_SEEK = 142
BrickRED::ERROR_CODE_NOT_SUPPORTED = 143
BrickRED::ERROR_CODE_TOO_MANY_OPEN_FILES = 144

For state:

BrickRED::PROGRAM_SCHEDULER_STATE_STOPPED = 0
BrickRED::PROGRAM_SCHEDULER_STATE_RUNNING = 1

BrickRED#continue_program_schedule(program_id) → int¶

Parameters:	program_id – Type: int, Range: [0 to 2¹⁶ - 1]
Returns:	error_code – Type: int, Range: See constants

The following constants are available for this function:

For error_code:

BrickRED::ERROR_CODE_SUCCESS = 0
BrickRED::ERROR_CODE_UNKNOWN_ERROR = 1
BrickRED::ERROR_CODE_INVALID_OPERATION = 2
BrickRED::ERROR_CODE_OPERATION_ABORTED = 3
BrickRED::ERROR_CODE_INTERNAL_ERROR = 4
BrickRED::ERROR_CODE_UNKNOWN_SESSION_ID = 5
BrickRED::ERROR_CODE_NO_FREE_SESSION_ID = 6
BrickRED::ERROR_CODE_UNKNOWN_OBJECT_ID = 7
BrickRED::ERROR_CODE_NO_FREE_OBJECT_ID = 8
BrickRED::ERROR_CODE_OBJECT_IS_LOCKED = 9
BrickRED::ERROR_CODE_NO_MORE_DATA = 10
BrickRED::ERROR_CODE_WRONG_LIST_ITEM_TYPE = 11
BrickRED::ERROR_CODE_PROGRAM_IS_PURGED = 12
BrickRED::ERROR_CODE_INVALID_PARAMETER = 128
BrickRED::ERROR_CODE_NO_FREE_MEMORY = 129
BrickRED::ERROR_CODE_NO_FREE_SPACE = 130
BrickRED::ERROR_CODE_ACCESS_DENIED = 121
BrickRED::ERROR_CODE_ALREADY_EXISTS = 132
BrickRED::ERROR_CODE_DOES_NOT_EXIST = 133
BrickRED::ERROR_CODE_INTERRUPTED = 134
BrickRED::ERROR_CODE_IS_DIRECTORY = 135
BrickRED::ERROR_CODE_NOT_A_DIRECTORY = 136
BrickRED::ERROR_CODE_WOULD_BLOCK = 137
BrickRED::ERROR_CODE_OVERFLOW = 138
BrickRED::ERROR_CODE_BAD_FILE_DESCRIPTOR = 139
BrickRED::ERROR_CODE_OUT_OF_RANGE = 140
BrickRED::ERROR_CODE_NAME_TOO_LONG = 141
BrickRED::ERROR_CODE_INVALID_SEEK = 142
BrickRED::ERROR_CODE_NOT_SUPPORTED = 143
BrickRED::ERROR_CODE_TOO_MANY_OPEN_FILES = 144

BrickRED#start_program(program_id) → int¶

Parameters:	program_id – Type: int, Range: [0 to 2¹⁶ - 1]
Returns:	error_code – Type: int, Range: See constants

The following constants are available for this function:

For error_code:

BrickRED::ERROR_CODE_SUCCESS = 0
BrickRED::ERROR_CODE_UNKNOWN_ERROR = 1
BrickRED::ERROR_CODE_INVALID_OPERATION = 2
BrickRED::ERROR_CODE_OPERATION_ABORTED = 3
BrickRED::ERROR_CODE_INTERNAL_ERROR = 4
BrickRED::ERROR_CODE_UNKNOWN_SESSION_ID = 5
BrickRED::ERROR_CODE_NO_FREE_SESSION_ID = 6
BrickRED::ERROR_CODE_UNKNOWN_OBJECT_ID = 7
BrickRED::ERROR_CODE_NO_FREE_OBJECT_ID = 8
BrickRED::ERROR_CODE_OBJECT_IS_LOCKED = 9
BrickRED::ERROR_CODE_NO_MORE_DATA = 10
BrickRED::ERROR_CODE_WRONG_LIST_ITEM_TYPE = 11
BrickRED::ERROR_CODE_PROGRAM_IS_PURGED = 12
BrickRED::ERROR_CODE_INVALID_PARAMETER = 128
BrickRED::ERROR_CODE_NO_FREE_MEMORY = 129
BrickRED::ERROR_CODE_NO_FREE_SPACE = 130
BrickRED::ERROR_CODE_ACCESS_DENIED = 121
BrickRED::ERROR_CODE_ALREADY_EXISTS = 132
BrickRED::ERROR_CODE_DOES_NOT_EXIST = 133
BrickRED::ERROR_CODE_INTERRUPTED = 134
BrickRED::ERROR_CODE_IS_DIRECTORY = 135
BrickRED::ERROR_CODE_NOT_A_DIRECTORY = 136
BrickRED::ERROR_CODE_WOULD_BLOCK = 137
BrickRED::ERROR_CODE_OVERFLOW = 138
BrickRED::ERROR_CODE_BAD_FILE_DESCRIPTOR = 139
BrickRED::ERROR_CODE_OUT_OF_RANGE = 140
BrickRED::ERROR_CODE_NAME_TOO_LONG = 141
BrickRED::ERROR_CODE_INVALID_SEEK = 142
BrickRED::ERROR_CODE_NOT_SUPPORTED = 143
BrickRED::ERROR_CODE_TOO_MANY_OPEN_FILES = 144

BrickRED#get_last_spawned_program_process(program_id, session_id) → [int, int, int]¶

Parameters:	program_id – Type: int, Range: [0 to 2¹⁶ - 1] session_id – Type: int, Range: [0 to 2¹⁶ - 1]
Return Array:	0: error_code – Type: int, Range: See constants 1: process_id – Type: int, Range: [0 to 2¹⁶ - 1] 2: timestamp – Type: int, Range: [0 to 2⁶⁴ - 1]

The following constants are available for this function:

For error_code:

BrickRED::ERROR_CODE_SUCCESS = 0
BrickRED::ERROR_CODE_UNKNOWN_ERROR = 1
BrickRED::ERROR_CODE_INVALID_OPERATION = 2
BrickRED::ERROR_CODE_OPERATION_ABORTED = 3
BrickRED::ERROR_CODE_INTERNAL_ERROR = 4
BrickRED::ERROR_CODE_UNKNOWN_SESSION_ID = 5
BrickRED::ERROR_CODE_NO_FREE_SESSION_ID = 6
BrickRED::ERROR_CODE_UNKNOWN_OBJECT_ID = 7
BrickRED::ERROR_CODE_NO_FREE_OBJECT_ID = 8
BrickRED::ERROR_CODE_OBJECT_IS_LOCKED = 9
BrickRED::ERROR_CODE_NO_MORE_DATA = 10
BrickRED::ERROR_CODE_WRONG_LIST_ITEM_TYPE = 11
BrickRED::ERROR_CODE_PROGRAM_IS_PURGED = 12
BrickRED::ERROR_CODE_INVALID_PARAMETER = 128
BrickRED::ERROR_CODE_NO_FREE_MEMORY = 129
BrickRED::ERROR_CODE_NO_FREE_SPACE = 130
BrickRED::ERROR_CODE_ACCESS_DENIED = 121
BrickRED::ERROR_CODE_ALREADY_EXISTS = 132
BrickRED::ERROR_CODE_DOES_NOT_EXIST = 133
BrickRED::ERROR_CODE_INTERRUPTED = 134
BrickRED::ERROR_CODE_IS_DIRECTORY = 135
BrickRED::ERROR_CODE_NOT_A_DIRECTORY = 136
BrickRED::ERROR_CODE_WOULD_BLOCK = 137
BrickRED::ERROR_CODE_OVERFLOW = 138
BrickRED::ERROR_CODE_BAD_FILE_DESCRIPTOR = 139
BrickRED::ERROR_CODE_OUT_OF_RANGE = 140
BrickRED::ERROR_CODE_NAME_TOO_LONG = 141
BrickRED::ERROR_CODE_INVALID_SEEK = 142
BrickRED::ERROR_CODE_NOT_SUPPORTED = 143
BrickRED::ERROR_CODE_TOO_MANY_OPEN_FILES = 144

BrickRED#get_custom_program_option_names(program_id, session_id) → [int, int]¶

Parameters:	program_id – Type: int, Range: [0 to 2¹⁶ - 1] session_id – Type: int, Range: [0 to 2¹⁶ - 1]
Return Array:	0: error_code – Type: int, Range: See constants 1: names_list_id – Type: int, Range: [0 to 2¹⁶ - 1]

The following constants are available for this function:

For error_code:

BrickRED::ERROR_CODE_SUCCESS = 0
BrickRED::ERROR_CODE_UNKNOWN_ERROR = 1
BrickRED::ERROR_CODE_INVALID_OPERATION = 2
BrickRED::ERROR_CODE_OPERATION_ABORTED = 3
BrickRED::ERROR_CODE_INTERNAL_ERROR = 4
BrickRED::ERROR_CODE_UNKNOWN_SESSION_ID = 5
BrickRED::ERROR_CODE_NO_FREE_SESSION_ID = 6
BrickRED::ERROR_CODE_UNKNOWN_OBJECT_ID = 7
BrickRED::ERROR_CODE_NO_FREE_OBJECT_ID = 8
BrickRED::ERROR_CODE_OBJECT_IS_LOCKED = 9
BrickRED::ERROR_CODE_NO_MORE_DATA = 10
BrickRED::ERROR_CODE_WRONG_LIST_ITEM_TYPE = 11
BrickRED::ERROR_CODE_PROGRAM_IS_PURGED = 12
BrickRED::ERROR_CODE_INVALID_PARAMETER = 128
BrickRED::ERROR_CODE_NO_FREE_MEMORY = 129
BrickRED::ERROR_CODE_NO_FREE_SPACE = 130
BrickRED::ERROR_CODE_ACCESS_DENIED = 121
BrickRED::ERROR_CODE_ALREADY_EXISTS = 132
BrickRED::ERROR_CODE_DOES_NOT_EXIST = 133
BrickRED::ERROR_CODE_INTERRUPTED = 134
BrickRED::ERROR_CODE_IS_DIRECTORY = 135
BrickRED::ERROR_CODE_NOT_A_DIRECTORY = 136
BrickRED::ERROR_CODE_WOULD_BLOCK = 137
BrickRED::ERROR_CODE_OVERFLOW = 138
BrickRED::ERROR_CODE_BAD_FILE_DESCRIPTOR = 139
BrickRED::ERROR_CODE_OUT_OF_RANGE = 140
BrickRED::ERROR_CODE_NAME_TOO_LONG = 141
BrickRED::ERROR_CODE_INVALID_SEEK = 142
BrickRED::ERROR_CODE_NOT_SUPPORTED = 143
BrickRED::ERROR_CODE_TOO_MANY_OPEN_FILES = 144

BrickRED#set_custom_program_option_value(program_id, name_string_id, value_string_id) → int¶

Parameters:	program_id – Type: int, Range: [0 to 2¹⁶ - 1] name_string_id – Type: int, Range: [0 to 2¹⁶ - 1] value_string_id – Type: int, Range: [0 to 2¹⁶ - 1]
Returns:	error_code – Type: int, Range: See constants

The following constants are available for this function:

For error_code:

BrickRED::ERROR_CODE_SUCCESS = 0
BrickRED::ERROR_CODE_UNKNOWN_ERROR = 1
BrickRED::ERROR_CODE_INVALID_OPERATION = 2
BrickRED::ERROR_CODE_OPERATION_ABORTED = 3
BrickRED::ERROR_CODE_INTERNAL_ERROR = 4
BrickRED::ERROR_CODE_UNKNOWN_SESSION_ID = 5
BrickRED::ERROR_CODE_NO_FREE_SESSION_ID = 6
BrickRED::ERROR_CODE_UNKNOWN_OBJECT_ID = 7
BrickRED::ERROR_CODE_NO_FREE_OBJECT_ID = 8
BrickRED::ERROR_CODE_OBJECT_IS_LOCKED = 9
BrickRED::ERROR_CODE_NO_MORE_DATA = 10
BrickRED::ERROR_CODE_WRONG_LIST_ITEM_TYPE = 11
BrickRED::ERROR_CODE_PROGRAM_IS_PURGED = 12
BrickRED::ERROR_CODE_INVALID_PARAMETER = 128
BrickRED::ERROR_CODE_NO_FREE_MEMORY = 129
BrickRED::ERROR_CODE_NO_FREE_SPACE = 130
BrickRED::ERROR_CODE_ACCESS_DENIED = 121
BrickRED::ERROR_CODE_ALREADY_EXISTS = 132
BrickRED::ERROR_CODE_DOES_NOT_EXIST = 133
BrickRED::ERROR_CODE_INTERRUPTED = 134
BrickRED::ERROR_CODE_IS_DIRECTORY = 135
BrickRED::ERROR_CODE_NOT_A_DIRECTORY = 136
BrickRED::ERROR_CODE_WOULD_BLOCK = 137
BrickRED::ERROR_CODE_OVERFLOW = 138
BrickRED::ERROR_CODE_BAD_FILE_DESCRIPTOR = 139
BrickRED::ERROR_CODE_OUT_OF_RANGE = 140
BrickRED::ERROR_CODE_NAME_TOO_LONG = 141
BrickRED::ERROR_CODE_INVALID_SEEK = 142
BrickRED::ERROR_CODE_NOT_SUPPORTED = 143
BrickRED::ERROR_CODE_TOO_MANY_OPEN_FILES = 144

BrickRED#get_custom_program_option_value(program_id, name_string_id, session_id) → [int, int]¶

Parameters:	program_id – Type: int, Range: [0 to 2¹⁶ - 1] name_string_id – Type: int, Range: [0 to 2¹⁶ - 1] session_id – Type: int, Range: [0 to 2¹⁶ - 1]
Return Array:	0: error_code – Type: int, Range: See constants 1: value_string_id – Type: int, Range: [0 to 2¹⁶ - 1]

The following constants are available for this function:

For error_code:

BrickRED::ERROR_CODE_SUCCESS = 0
BrickRED::ERROR_CODE_UNKNOWN_ERROR = 1
BrickRED::ERROR_CODE_INVALID_OPERATION = 2
BrickRED::ERROR_CODE_OPERATION_ABORTED = 3
BrickRED::ERROR_CODE_INTERNAL_ERROR = 4
BrickRED::ERROR_CODE_UNKNOWN_SESSION_ID = 5
BrickRED::ERROR_CODE_NO_FREE_SESSION_ID = 6
BrickRED::ERROR_CODE_UNKNOWN_OBJECT_ID = 7
BrickRED::ERROR_CODE_NO_FREE_OBJECT_ID = 8
BrickRED::ERROR_CODE_OBJECT_IS_LOCKED = 9
BrickRED::ERROR_CODE_NO_MORE_DATA = 10
BrickRED::ERROR_CODE_WRONG_LIST_ITEM_TYPE = 11
BrickRED::ERROR_CODE_PROGRAM_IS_PURGED = 12
BrickRED::ERROR_CODE_INVALID_PARAMETER = 128
BrickRED::ERROR_CODE_NO_FREE_MEMORY = 129
BrickRED::ERROR_CODE_NO_FREE_SPACE = 130
BrickRED::ERROR_CODE_ACCESS_DENIED = 121
BrickRED::ERROR_CODE_ALREADY_EXISTS = 132
BrickRED::ERROR_CODE_DOES_NOT_EXIST = 133
BrickRED::ERROR_CODE_INTERRUPTED = 134
BrickRED::ERROR_CODE_IS_DIRECTORY = 135
BrickRED::ERROR_CODE_NOT_A_DIRECTORY = 136
BrickRED::ERROR_CODE_WOULD_BLOCK = 137
BrickRED::ERROR_CODE_OVERFLOW = 138
BrickRED::ERROR_CODE_BAD_FILE_DESCRIPTOR = 139
BrickRED::ERROR_CODE_OUT_OF_RANGE = 140
BrickRED::ERROR_CODE_NAME_TOO_LONG = 141
BrickRED::ERROR_CODE_INVALID_SEEK = 142
BrickRED::ERROR_CODE_NOT_SUPPORTED = 143
BrickRED::ERROR_CODE_TOO_MANY_OPEN_FILES = 144

BrickRED#remove_custom_program_option(program_id, name_string_id) → int¶

Parameters:	program_id – Type: int, Range: [0 to 2¹⁶ - 1] name_string_id – Type: int, Range: [0 to 2¹⁶ - 1]
Returns:	error_code – Type: int, Range: See constants

The following constants are available for this function:

For error_code:

BrickRED::ERROR_CODE_SUCCESS = 0
BrickRED::ERROR_CODE_UNKNOWN_ERROR = 1
BrickRED::ERROR_CODE_INVALID_OPERATION = 2
BrickRED::ERROR_CODE_OPERATION_ABORTED = 3
BrickRED::ERROR_CODE_INTERNAL_ERROR = 4
BrickRED::ERROR_CODE_UNKNOWN_SESSION_ID = 5
BrickRED::ERROR_CODE_NO_FREE_SESSION_ID = 6
BrickRED::ERROR_CODE_UNKNOWN_OBJECT_ID = 7
BrickRED::ERROR_CODE_NO_FREE_OBJECT_ID = 8
BrickRED::ERROR_CODE_OBJECT_IS_LOCKED = 9
BrickRED::ERROR_CODE_NO_MORE_DATA = 10
BrickRED::ERROR_CODE_WRONG_LIST_ITEM_TYPE = 11
BrickRED::ERROR_CODE_PROGRAM_IS_PURGED = 12
BrickRED::ERROR_CODE_INVALID_PARAMETER = 128
BrickRED::ERROR_CODE_NO_FREE_MEMORY = 129
BrickRED::ERROR_CODE_NO_FREE_SPACE = 130
BrickRED::ERROR_CODE_ACCESS_DENIED = 121
BrickRED::ERROR_CODE_ALREADY_EXISTS = 132
BrickRED::ERROR_CODE_DOES_NOT_EXIST = 133
BrickRED::ERROR_CODE_INTERRUPTED = 134
BrickRED::ERROR_CODE_IS_DIRECTORY = 135
BrickRED::ERROR_CODE_NOT_A_DIRECTORY = 136
BrickRED::ERROR_CODE_WOULD_BLOCK = 137
BrickRED::ERROR_CODE_OVERFLOW = 138
BrickRED::ERROR_CODE_BAD_FILE_DESCRIPTOR = 139
BrickRED::ERROR_CODE_OUT_OF_RANGE = 140
BrickRED::ERROR_CODE_NAME_TOO_LONG = 141
BrickRED::ERROR_CODE_INVALID_SEEK = 142
BrickRED::ERROR_CODE_NOT_SUPPORTED = 143
BrickRED::ERROR_CODE_TOO_MANY_OPEN_FILES = 144

BrickRED#get_identity → [str, str, chr, [int, ...], [int, ...], int]¶

Return Array:

0: uid – Type: str, Length: up to 8
1: connected_uid – Type: str, Length: up to 8
2: position – Type: chr, Range: ['0' to '8']
3: hardware_version – Type: [int, ...], Length: 3

0: major – Type: int, Range: [0 to 255]
1: minor – Type: int, Range: [0 to 255]
2: revision – Type: int, Range: [0 to 255]

4: firmware_version – Type: [int, ...], Length: 3

0: major – Type: int, Range: [0 to 255]
1: minor – Type: int, Range: [0 to 255]
2: revision – Type: int, Range: [0 to 255]

5: device_identifier – Type: int, Range: [0 to 2¹⁶ - 1]

Returns the UID, the UID where the Brick is connected to, the position, the hardware and firmware version as well as the device identifier.

The position is the position in the stack from '0' (bottom) to '8' (top).

The device identifier numbers can be found here. There is also a constant for the device identifier of this Brick.

Callback Configuration Functions¶

BrickRED#register_callback(callback_id) { |param [, ...]| block } → nil¶

Parameters:	callback_id – Type: int

Registers the given block with the given callback_id.

The available callback IDs with corresponding function signatures are listed below.

Callbacks¶

Callbacks can be registered to receive time critical or recurring data from the device. The registration is done with the #register_callback function of the device object. The first parameter is the callback ID and the second parameter is a block:

red.register_callback BrickRED::CALLBACK_EXAMPLE, do |param|
  puts "#{param}"
end

The available constants with inherent number and type of parameters are described below.

Note

Using callbacks for recurring events is always preferred compared to using getters. It will use less USB bandwidth and the latency will be a lot better, since there is no round trip time.

BrickRED::CALLBACK_ASYNC_FILE_READ¶

Callback Parameters:	file_id – Type: int, Range: [0 to 2¹⁶ - 1] error_code – Type: int, Range: See constants buffer – Type: [int, ...], Length: 60, Range: [0 to 255] length_read – Type: int, Unit: 1 B, Range: [0 to 255]

This callback reports the result of a call to the #read_file_async function.

The following constants are available for this function:

For error_code:

BrickRED::ERROR_CODE_SUCCESS = 0
BrickRED::ERROR_CODE_UNKNOWN_ERROR = 1
BrickRED::ERROR_CODE_INVALID_OPERATION = 2
BrickRED::ERROR_CODE_OPERATION_ABORTED = 3
BrickRED::ERROR_CODE_INTERNAL_ERROR = 4
BrickRED::ERROR_CODE_UNKNOWN_SESSION_ID = 5
BrickRED::ERROR_CODE_NO_FREE_SESSION_ID = 6
BrickRED::ERROR_CODE_UNKNOWN_OBJECT_ID = 7
BrickRED::ERROR_CODE_NO_FREE_OBJECT_ID = 8
BrickRED::ERROR_CODE_OBJECT_IS_LOCKED = 9
BrickRED::ERROR_CODE_NO_MORE_DATA = 10
BrickRED::ERROR_CODE_WRONG_LIST_ITEM_TYPE = 11
BrickRED::ERROR_CODE_PROGRAM_IS_PURGED = 12
BrickRED::ERROR_CODE_INVALID_PARAMETER = 128
BrickRED::ERROR_CODE_NO_FREE_MEMORY = 129
BrickRED::ERROR_CODE_NO_FREE_SPACE = 130
BrickRED::ERROR_CODE_ACCESS_DENIED = 121
BrickRED::ERROR_CODE_ALREADY_EXISTS = 132
BrickRED::ERROR_CODE_DOES_NOT_EXIST = 133
BrickRED::ERROR_CODE_INTERRUPTED = 134
BrickRED::ERROR_CODE_IS_DIRECTORY = 135
BrickRED::ERROR_CODE_NOT_A_DIRECTORY = 136
BrickRED::ERROR_CODE_WOULD_BLOCK = 137
BrickRED::ERROR_CODE_OVERFLOW = 138
BrickRED::ERROR_CODE_BAD_FILE_DESCRIPTOR = 139
BrickRED::ERROR_CODE_OUT_OF_RANGE = 140
BrickRED::ERROR_CODE_NAME_TOO_LONG = 141
BrickRED::ERROR_CODE_INVALID_SEEK = 142
BrickRED::ERROR_CODE_NOT_SUPPORTED = 143
BrickRED::ERROR_CODE_TOO_MANY_OPEN_FILES = 144

BrickRED::CALLBACK_ASYNC_FILE_WRITE¶

Callback Parameters:	file_id – Type: int, Range: [0 to 2¹⁶ - 1] error_code – Type: int, Range: See constants length_written – Type: int, Unit: 1 B, Range: [0 to 255]

This callback reports the result of a call to the #write_file_async function.

The following constants are available for this function:

For error_code:

BrickRED::ERROR_CODE_SUCCESS = 0
BrickRED::ERROR_CODE_UNKNOWN_ERROR = 1
BrickRED::ERROR_CODE_INVALID_OPERATION = 2
BrickRED::ERROR_CODE_OPERATION_ABORTED = 3
BrickRED::ERROR_CODE_INTERNAL_ERROR = 4
BrickRED::ERROR_CODE_UNKNOWN_SESSION_ID = 5
BrickRED::ERROR_CODE_NO_FREE_SESSION_ID = 6
BrickRED::ERROR_CODE_UNKNOWN_OBJECT_ID = 7
BrickRED::ERROR_CODE_NO_FREE_OBJECT_ID = 8
BrickRED::ERROR_CODE_OBJECT_IS_LOCKED = 9
BrickRED::ERROR_CODE_NO_MORE_DATA = 10
BrickRED::ERROR_CODE_WRONG_LIST_ITEM_TYPE = 11
BrickRED::ERROR_CODE_PROGRAM_IS_PURGED = 12
BrickRED::ERROR_CODE_INVALID_PARAMETER = 128
BrickRED::ERROR_CODE_NO_FREE_MEMORY = 129
BrickRED::ERROR_CODE_NO_FREE_SPACE = 130
BrickRED::ERROR_CODE_ACCESS_DENIED = 121
BrickRED::ERROR_CODE_ALREADY_EXISTS = 132
BrickRED::ERROR_CODE_DOES_NOT_EXIST = 133
BrickRED::ERROR_CODE_INTERRUPTED = 134
BrickRED::ERROR_CODE_IS_DIRECTORY = 135
BrickRED::ERROR_CODE_NOT_A_DIRECTORY = 136
BrickRED::ERROR_CODE_WOULD_BLOCK = 137
BrickRED::ERROR_CODE_OVERFLOW = 138
BrickRED::ERROR_CODE_BAD_FILE_DESCRIPTOR = 139
BrickRED::ERROR_CODE_OUT_OF_RANGE = 140
BrickRED::ERROR_CODE_NAME_TOO_LONG = 141
BrickRED::ERROR_CODE_INVALID_SEEK = 142
BrickRED::ERROR_CODE_NOT_SUPPORTED = 143
BrickRED::ERROR_CODE_TOO_MANY_OPEN_FILES = 144

BrickRED::CALLBACK_FILE_EVENTS_OCCURRED¶

Callback Parameters:	file_id – Type: int, Range: [0 to 2¹⁶ - 1] events – Type: int, Range: See constants

The following constants are available for this function:

For events:

BrickRED::FILE_EVENT_READABLE = 1
BrickRED::FILE_EVENT_WRITABLE = 2

BrickRED::CALLBACK_PROCESS_STATE_CHANGED¶

Callback Parameters:	process_id – Type: int, Range: [0 to 2¹⁶ - 1] state – Type: int, Range: See constants timestamp – Type: int, Range: [0 to 2⁶⁴ - 1] exit_code – Type: int, Range: [0 to 255]

The following constants are available for this function:

For state:

BrickRED::PROCESS_STATE_UNKNOWN = 0
BrickRED::PROCESS_STATE_RUNNING = 1
BrickRED::PROCESS_STATE_ERROR = 2
BrickRED::PROCESS_STATE_EXITED = 3
BrickRED::PROCESS_STATE_KILLED = 4
BrickRED::PROCESS_STATE_STOPPED = 5

BrickRED::CALLBACK_PROGRAM_SCHEDULER_STATE_CHANGED¶

Callback Parameters:	program_id – Type: int, Range: [0 to 2¹⁶ - 1]

BrickRED::CALLBACK_PROGRAM_PROCESS_SPAWNED¶

Callback Parameters:	program_id – Type: int, Range: [0 to 2¹⁶ - 1]

Virtual Functions¶

Virtual functions don't communicate with the device itself, but operate only on the API bindings device object. They can be called without the corresponding IP Connection object being connected.

BrickRED#get_api_version → [int, ...]¶

Return Array:	0: api_version – Type: [int, ...], Length: 3 0: major – Type: int, Range: [0 to 255] 1: minor – Type: int, Range: [0 to 255] 2: revision – Type: int, Range: [0 to 255]

Returns the version of the API definition implemented by this API bindings. This is neither the release version of this API bindings nor does it tell you anything about the represented Brick or Bricklet.

BrickRED#get_response_expected(function_id) → bool¶

Parameters:	function_id – Type: int, Range: See constants
Returns:	response_expected – Type: bool

Returns the response expected flag for the function specified by the function ID parameter. It is true if the function is expected to send a response, false otherwise.

For getter functions this is enabled by default and cannot be disabled, because those functions will always send a response. For callback configuration functions it is enabled by default too, but can be disabled by #set_response_expected. For setter functions it is disabled by default and can be enabled.

Enabling the response expected flag for a setter function allows to detect timeouts and other error conditions calls of this setter as well. The device will then send a response for this purpose. If this flag is disabled for a setter function then no response is sent and errors are silently ignored, because they cannot be detected.

The following constants are available for this function:

For function_id:

BrickRED::FUNCTION_EXPIRE_SESSION_UNCHECKED = 3
BrickRED::FUNCTION_RELEASE_OBJECT_UNCHECKED = 6
BrickRED::FUNCTION_READ_FILE_ASYNC = 21
BrickRED::FUNCTION_WRITE_FILE_UNCHECKED = 24
BrickRED::FUNCTION_WRITE_FILE_ASYNC = 25

BrickRED#set_response_expected(function_id, response_expected) → nil¶

Parameters:	function_id – Type: int, Range: See constants response_expected – Type: bool

Changes the response expected flag of the function specified by the function ID parameter. This flag can only be changed for setter (default value: false) and callback configuration functions (default value: true). For getter functions it is always enabled.

The following constants are available for this function:

For function_id:

BrickRED::FUNCTION_EXPIRE_SESSION_UNCHECKED = 3
BrickRED::FUNCTION_RELEASE_OBJECT_UNCHECKED = 6
BrickRED::FUNCTION_READ_FILE_ASYNC = 21
BrickRED::FUNCTION_WRITE_FILE_UNCHECKED = 24
BrickRED::FUNCTION_WRITE_FILE_ASYNC = 25

BrickRED#set_response_expected_all(response_expected) → nil¶

Parameters:	response_expected – Type: bool

Changes the response expected flag for all setter and callback configuration functions of this device at once.

Constants¶

BrickRED::DEVICE_IDENTIFIER¶

This constant is used to identify a RED Brick.

The #get_identity() function and the IPConnection::CALLBACK_ENUMERATE callback of the IP Connection have a device_identifier parameter to specify the Brick's or Bricklet's type.

BrickRED::DEVICE_DISPLAY_NAME¶: This constant represents the human readable name of a RED Brick.