Software / API Bindings / Rust / API Reference and Examples / Bricklets (Discontinued) / Current12 Bricklet

Rust - Current12 Bricklet¶

This is the description of the Rust API bindings for the Current12 Bricklet. General information and technical specifications for the Current12 Bricklet are summarized in its hardware description.

An installation guide for the Rust API bindings is part of their general description. Additional documentation can be found on docs.rs.

Examples¶

The example code below is Public Domain (CC0 1.0).

Simple¶

Download (example_simple.rs)

use std::{error::Error, io};

use tinkerforge::{current12_bricklet::*, ip_connection::IpConnection};

const HOST: &str = "localhost";
const PORT: u16 = 4223;
const UID: &str = "XYZ"; // Change XYZ to the UID of your Current12 Bricklet.

fn main() -> Result<(), Box<dyn Error>> {
    let ipcon = IpConnection::new(); // Create IP connection.
    let c = Current12Bricklet::new(UID, &ipcon); // Create device object.

    ipcon.connect((HOST, PORT)).recv()??; // Connect to brickd.
                                          // Don't use device before ipcon is connected.

    // Get current current.
    let current = c.get_current().recv()?;
    println!("Current: {} A", current as f32 / 1000.0);

    println!("Press enter to exit.");
    let mut _input = String::new();
    io::stdin().read_line(&mut _input)?;
    ipcon.disconnect();
    Ok(())
}

Callback¶

Download (example_callback.rs)

use std::{error::Error, io, thread};
use tinkerforge::{current12_bricklet::*, ip_connection::IpConnection};

const HOST: &str = "localhost";
const PORT: u16 = 4223;
const UID: &str = "XYZ"; // Change XYZ to the UID of your Current12 Bricklet.

fn main() -> Result<(), Box<dyn Error>> {
    let ipcon = IpConnection::new(); // Create IP connection.
    let c = Current12Bricklet::new(UID, &ipcon); // Create device object.

    ipcon.connect((HOST, PORT)).recv()??; // Connect to brickd.
                                          // Don't use device before ipcon is connected.

    let current_receiver = c.get_current_callback_receiver();

    // Spawn thread to handle received callback messages.
    // This thread ends when the `c` object
    // is dropped, so there is no need for manual cleanup.
    thread::spawn(move || {
        for current in current_receiver {
            println!("Current: {} A", current as f32 / 1000.0);
        }
    });

    // Set period for current receiver to 1s (1000ms).
    // Note: The current callback is only called every second
    //       if the current has changed since the last call!
    c.set_current_callback_period(1000);

    println!("Press enter to exit.");
    let mut _input = String::new();
    io::stdin().read_line(&mut _input)?;
    ipcon.disconnect();
    Ok(())
}

Threshold¶

Download (example_threshold.rs)

use std::{error::Error, io, thread};
use tinkerforge::{current12_bricklet::*, ip_connection::IpConnection};

const HOST: &str = "localhost";
const PORT: u16 = 4223;
const UID: &str = "XYZ"; // Change XYZ to the UID of your Current12 Bricklet.

fn main() -> Result<(), Box<dyn Error>> {
    let ipcon = IpConnection::new(); // Create IP connection.
    let c = Current12Bricklet::new(UID, &ipcon); // Create device object.

    ipcon.connect((HOST, PORT)).recv()??; // Connect to brickd.
                                          // Don't use device before ipcon is connected.

    // Get threshold receivers with a debounce time of 10 seconds (10000ms).
    c.set_debounce_period(10000);

    let current_reached_receiver = c.get_current_reached_callback_receiver();

    // Spawn thread to handle received callback messages.
    // This thread ends when the `c` object
    // is dropped, so there is no need for manual cleanup.
    thread::spawn(move || {
        for current_reached in current_reached_receiver {
            println!("Current: {} A", current_reached as f32 / 1000.0);
        }
    });

    // Configure threshold for current "greater than 5 A".
    c.set_current_callback_threshold('>', 5 * 1000, 0);

    println!("Press enter to exit.");
    let mut _input = String::new();
    io::stdin().read_line(&mut _input)?;
    ipcon.disconnect();
    Ok(())
}

API¶

To allow non-blocking usage, nearly every function of the Rust bindings returns a wrapper around a mpsc::Receiver. To block until the function has finished and get your result, call one of the receiver's recv variants. Those return either the result sent by the device, or any error occurred.

Functions returning a result directly will block until the device has finished processing the request.

All functions listed below are thread-safe, those which return a receiver are lock-free.

Basic Functions¶

pub fn Current12Bricklet::new(uid: &str, ip_connection: &IpConnection) → Current12Bricklet¶

Parameters:	uid – Type: &str ip_connection – Type: &IPConnection
Returns:	current12 – Type: Current12Bricklet

Creates a new Current12Bricklet object with the unique device ID uid and adds it to the IPConnection ip_connection:

let current12 = Current12Bricklet::new("YOUR_DEVICE_UID", &ip_connection);

This device object can be used after the IP connection has been connected.

pub fn Current12Bricklet::get_current(&self) → ConvertingReceiver<i16>¶

Returns:	current – Type: i16, Unit: 1 mA, Range: [-12500 to 12500]

Returns the current of the sensor.

If you want to get the current periodically, it is recommended to use the Current12Bricklet::get_current_callback_receiver callback and set the period with Current12Bricklet::set_current_callback_period.

Advanced Functions¶

pub fn Current12Bricklet::calibrate(&self) → ConvertingReceiver<()>¶

Calibrates the 0 value of the sensor. You have to call this function when there is no current present.

The zero point of the current sensor is depending on the exact properties of the analog-to-digital converter, the length of the Bricklet cable and the temperature. Thus, if you change the Brick or the environment in which the Bricklet is used, you might have to recalibrate.

The resulting calibration will be saved on the EEPROM of the Current Bricklet.

pub fn Current12Bricklet::is_over_current(&self) → ConvertingReceiver<bool>¶

Returns:	over – Type: bool

Returns true if more than 12.5A were measured.

Note

To reset this value you have to power cycle the Bricklet.

pub fn Current12Bricklet::get_analog_value(&self) → ConvertingReceiver<u16>¶

Returns:	value – Type: u16, Range: [0 to 2¹² - 1]

Returns the value as read by a 12-bit analog-to-digital converter.

Note

The value returned by Current12Bricklet::get_current is averaged over several samples to yield less noise, while Current12Bricklet::get_analog_value gives back raw unfiltered analog values. The only reason to use Current12Bricklet::get_analog_value is, if you need the full resolution of the analog-to-digital converter.

If you want the analog value periodically, it is recommended to use the Current12Bricklet::get_analog_value_callback_receiver callback and set the period with Current12Bricklet::set_analog_value_callback_period.

pub fn Current12Bricklet::get_identity(&self) → ConvertingReceiver<Identity>¶

Return Object:

Return Object:	uid – Type: String, Length: up to 8 connected_uid – Type: String, Length: up to 8 position – Type: char, Range: ['a' to 'h', 'z'] hardware_version – Type: [u8; 3] 0: major – Type: u8, Range: [0 to 255] 1: minor – Type: u8, Range: [0 to 255] 2: revision – Type: u8, Range: [0 to 255] firmware_version – Type: [u8; 3] 0: major – Type: u8, Range: [0 to 255] 1: minor – Type: u8, Range: [0 to 255] 2: revision – Type: u8, Range: [0 to 255] device_identifier – Type: u16, Range: [0 to 2¹⁶ - 1]

uid – Type: String, Length: up to 8
connected_uid – Type: String, Length: up to 8
position – Type: char, Range: ['a' to 'h', 'z']
hardware_version – Type: [u8; 3]

0: major – Type: u8, Range: [0 to 255]
1: minor – Type: u8, Range: [0 to 255]
2: revision – Type: u8, Range: [0 to 255]

firmware_version – Type: [u8; 3]

0: major – Type: u8, Range: [0 to 255]
1: minor – Type: u8, Range: [0 to 255]
2: revision – Type: u8, Range: [0 to 255]

device_identifier – Type: u16, Range: [0 to 2¹⁶ - 1]

Returns the UID, the UID where the Bricklet is connected to, the position, the hardware and firmware version as well as the device identifier.

The position can be 'a', 'b', 'c', 'd', 'e', 'f', 'g' or 'h' (Bricklet Port). A Bricklet connected to an Isolator Bricklet is always at position 'z'.

The device identifier numbers can be found here. There is also a constant for the device identifier of this Bricklet.

Callback Configuration Functions¶

pub fn Current12Bricklet::set_current_callback_period(&self, period: u32) → ConvertingReceiver<()>¶

Parameters:	period – Type: u32, Unit: 1 ms, Range: [0 to 2³² - 1], Default: 0

Sets the period with which the Current12Bricklet::get_current_callback_receiver callback is triggered periodically. A value of 0 turns the callback off.

The Current12Bricklet::get_current_callback_receiver callback is only triggered if the current has changed since the last triggering.

pub fn Current12Bricklet::get_current_callback_period(&self) → ConvertingReceiver<u32>¶

Returns:	period – Type: u32, Unit: 1 ms, Range: [0 to 2³² - 1], Default: 0

Returns the period as set by Current12Bricklet::set_current_callback_period.

pub fn Current12Bricklet::set_analog_value_callback_period(&self, period: u32) → ConvertingReceiver<()>¶

Parameters:	period – Type: u32, Unit: 1 ms, Range: [0 to 2³² - 1], Default: 0

Sets the period with which the Current12Bricklet::get_analog_value_callback_receiver callback is triggered periodically. A value of 0 turns the callback off.

The Current12Bricklet::get_analog_value_callback_receiver callback is only triggered if the analog value has changed since the last triggering.

pub fn Current12Bricklet::get_analog_value_callback_period(&self) → ConvertingReceiver<u32>¶

Returns:	period – Type: u32, Unit: 1 ms, Range: [0 to 2³² - 1], Default: 0

Returns the period as set by Current12Bricklet::set_analog_value_callback_period.

pub fn Current12Bricklet::set_current_callback_threshold(&self, option: char, min: i16, max: i16) → ConvertingReceiver<()>¶

Parameters:	option – Type: char, Range: See constants, Default: 'x' min – Type: i16, Unit: 1 mA, Range: [-2¹⁵ to 2¹⁵ - 1], Default: 0 max – Type: i16, Unit: 1 mA, Range: [-2¹⁵ to 2¹⁵ - 1], Default: 0

Sets the thresholds for the Current12Bricklet::get_current_reached_callback_receiver callback.

The following options are possible:

Option	Description
'x'	Callback is turned off
'o'	Callback is triggered when the current is outside the min and max values
'i'	Callback is triggered when the current is inside the min and max values
'<'	Callback is triggered when the current is smaller than the min value (max is ignored)
'>'	Callback is triggered when the current is greater than the min value (max is ignored)

The following constants are available for this function:

For option:

CURRENT12_BRICKLET_THRESHOLD_OPTION_OFF = 'x'
CURRENT12_BRICKLET_THRESHOLD_OPTION_OUTSIDE = 'o'
CURRENT12_BRICKLET_THRESHOLD_OPTION_INSIDE = 'i'
CURRENT12_BRICKLET_THRESHOLD_OPTION_SMALLER = '<'
CURRENT12_BRICKLET_THRESHOLD_OPTION_GREATER = '>'

pub fn Current12Bricklet::get_current_callback_threshold(&self) → ConvertingReceiver<CurrentCallbackThreshold>¶

Return Object:	option – Type: char, Range: See constants, Default: 'x' min – Type: i16, Unit: 1 mA, Range: [-2¹⁵ to 2¹⁵ - 1], Default: 0 max – Type: i16, Unit: 1 mA, Range: [-2¹⁵ to 2¹⁵ - 1], Default: 0

Returns the threshold as set by Current12Bricklet::set_current_callback_threshold.

The following constants are available for this function:

For option:

CURRENT12_BRICKLET_THRESHOLD_OPTION_OFF = 'x'
CURRENT12_BRICKLET_THRESHOLD_OPTION_OUTSIDE = 'o'
CURRENT12_BRICKLET_THRESHOLD_OPTION_INSIDE = 'i'
CURRENT12_BRICKLET_THRESHOLD_OPTION_SMALLER = '<'
CURRENT12_BRICKLET_THRESHOLD_OPTION_GREATER = '>'

pub fn Current12Bricklet::set_analog_value_callback_threshold(&self, option: char, min: u16, max: u16) → ConvertingReceiver<()>¶

Parameters:	option – Type: char, Range: See constants, Default: 'x' min – Type: u16, Range: [0 to 2¹⁶ - 1], Default: 0 max – Type: u16, Range: [0 to 2¹⁶ - 1], Default: 0

Sets the thresholds for the Current12Bricklet::get_analog_value_reached_callback_receiver callback.

The following options are possible:

Option	Description
'x'	Callback is turned off
'o'	Callback is triggered when the analog value is outside the min and max values
'i'	Callback is triggered when the analog value is inside the min and max values
'<'	Callback is triggered when the analog value is smaller than the min value (max is ignored)
'>'	Callback is triggered when the analog value is greater than the min value (max is ignored)

The following constants are available for this function:

For option:

CURRENT12_BRICKLET_THRESHOLD_OPTION_OFF = 'x'
CURRENT12_BRICKLET_THRESHOLD_OPTION_OUTSIDE = 'o'
CURRENT12_BRICKLET_THRESHOLD_OPTION_INSIDE = 'i'
CURRENT12_BRICKLET_THRESHOLD_OPTION_SMALLER = '<'
CURRENT12_BRICKLET_THRESHOLD_OPTION_GREATER = '>'

pub fn Current12Bricklet::get_analog_value_callback_threshold(&self) → ConvertingReceiver<AnalogValueCallbackThreshold>¶

Return Object:	option – Type: char, Range: See constants, Default: 'x' min – Type: u16, Range: [0 to 2¹⁶ - 1], Default: 0 max – Type: u16, Range: [0 to 2¹⁶ - 1], Default: 0

Returns the threshold as set by Current12Bricklet::set_analog_value_callback_threshold.

The following constants are available for this function:

For option:

CURRENT12_BRICKLET_THRESHOLD_OPTION_OFF = 'x'
CURRENT12_BRICKLET_THRESHOLD_OPTION_OUTSIDE = 'o'
CURRENT12_BRICKLET_THRESHOLD_OPTION_INSIDE = 'i'
CURRENT12_BRICKLET_THRESHOLD_OPTION_SMALLER = '<'
CURRENT12_BRICKLET_THRESHOLD_OPTION_GREATER = '>'

pub fn Current12Bricklet::set_debounce_period(&self, debounce: u32) → ConvertingReceiver<()>¶

Parameters:	debounce – Type: u32, Unit: 1 ms, Range: [0 to 2³² - 1], Default: 100

Sets the period with which the threshold callbacks

Current12Bricklet::get_current_reached_callback_receiver,
Current12Bricklet::get_analog_value_reached_callback_receiver

are triggered, if the thresholds

Current12Bricklet::set_current_callback_threshold,
Current12Bricklet::set_analog_value_callback_threshold

keep being reached.

pub fn Current12Bricklet::get_debounce_period(&self) → ConvertingReceiver<u32>¶

Returns:	debounce – Type: u32, Unit: 1 ms, Range: [0 to 2³² - 1], Default: 100

Returns the debounce period as set by Current12Bricklet::set_debounce_period.

Callbacks¶

Callbacks can be registered to receive time critical or recurring data from the device. The registration is done with the corresponding get_*_callback_receiver function, which returns a receiver for callback events.

Note

Using callbacks for recurring events is always preferred compared to using getters. It will use less USB bandwidth and the latency will be a lot better, since there is no round trip time.

pub fn Current12Bricklet::get_current_callback_receiver(&self) → ConvertingCallbackReceiver<i16>¶

Event:	current – Type: i16, Unit: 1 mA, Range: [-12500 to 12500]

Receivers created with this function receive Current events.

This callback is triggered periodically with the period that is set by Current12Bricklet::set_current_callback_period. The received variable is the current of the sensor.

The Current12Bricklet::get_current_callback_receiver callback is only triggered if the current has changed since the last triggering.

pub fn Current12Bricklet::get_analog_value_callback_receiver(&self) → ConvertingCallbackReceiver<u16>¶

Event:	value – Type: u16, Range: [0 to 2¹² - 1]

Receivers created with this function receive Analog Value events.

This callback is triggered periodically with the period that is set by Current12Bricklet::set_analog_value_callback_period. The received variable is the analog value of the sensor.

The Current12Bricklet::get_analog_value_callback_receiver callback is only triggered if the current has changed since the last triggering.

pub fn Current12Bricklet::get_current_reached_callback_receiver(&self) → ConvertingCallbackReceiver<i16>¶

Event:	current – Type: i16, Unit: 1 mA, Range: [-12500 to 12500]

Receivers created with this function receive Current Reached events.

This callback is triggered when the threshold as set by Current12Bricklet::set_current_callback_threshold is reached. The received variable is the current of the sensor.

If the threshold keeps being reached, the callback is triggered periodically with the period as set by Current12Bricklet::set_debounce_period.

pub fn Current12Bricklet::get_analog_value_reached_callback_receiver(&self) → ConvertingCallbackReceiver<u16>¶

Event:	value – Type: u16, Range: [0 to 2¹² - 1]

Receivers created with this function receive Analog Value Reached events.

This callback is triggered when the threshold as set by Current12Bricklet::set_analog_value_callback_threshold is reached. The received variable is the analog value of the sensor.

If the threshold keeps being reached, the callback is triggered periodically with the period as set by Current12Bricklet::set_debounce_period.

pub fn Current12Bricklet::get_over_current_callback_receiver(&self) → ConvertingCallbackReceiver<()>¶

Receivers created with this function receive Over Current events.

This callback is triggered when an over current is measured (see Current12Bricklet::is_over_current).

Virtual Functions¶

Virtual functions don't communicate with the device itself, but operate only on the API bindings device object. They can be called without the corresponding IP Connection object being connected.

pub fn Current12Bricklet::get_api_version(&self) → [u8; 3]¶

Return Object:	api_version – Type: [u8; 3] 0: major – Type: u8, Range: [0 to 255] 1: minor – Type: u8, Range: [0 to 255] 2: revision – Type: u8, Range: [0 to 255]

Returns the version of the API definition implemented by this API bindings. This is neither the release version of this API bindings nor does it tell you anything about the represented Brick or Bricklet.

pub fn Current12Bricklet::get_response_expected(&mut self, function_id: u8) → bool¶

Parameters:	function_id – Type: u8, Range: See constants
Returns:	response_expected – Type: bool

Returns the response expected flag for the function specified by the function ID parameter. It is true if the function is expected to send a response, false otherwise.

For getter functions this is enabled by default and cannot be disabled, because those functions will always send a response. For callback configuration functions it is enabled by default too, but can be disabled by Current12Bricklet::set_response_expected. For setter functions it is disabled by default and can be enabled.

Enabling the response expected flag for a setter function allows to detect timeouts and other error conditions calls of this setter as well. The device will then send a response for this purpose. If this flag is disabled for a setter function then no response is sent and errors are silently ignored, because they cannot be detected.

The following constants are available for this function:

For function_id:

CURRENT12_BRICKLET_FUNCTION_CALIBRATE = 2
CURRENT12_BRICKLET_FUNCTION_SET_CURRENT_CALLBACK_PERIOD = 5
CURRENT12_BRICKLET_FUNCTION_SET_ANALOG_VALUE_CALLBACK_PERIOD = 7
CURRENT12_BRICKLET_FUNCTION_SET_CURRENT_CALLBACK_THRESHOLD = 9
CURRENT12_BRICKLET_FUNCTION_SET_ANALOG_VALUE_CALLBACK_THRESHOLD = 11
CURRENT12_BRICKLET_FUNCTION_SET_DEBOUNCE_PERIOD = 13

pub fn Current12Bricklet::set_response_expected(&mut self, function_id: u8, response_expected: bool) → ()¶

Parameters:	function_id – Type: u8, Range: See constants response_expected – Type: bool

Changes the response expected flag of the function specified by the function ID parameter. This flag can only be changed for setter (default value: false) and callback configuration functions (default value: true). For getter functions it is always enabled.

The following constants are available for this function:

For function_id:

CURRENT12_BRICKLET_FUNCTION_CALIBRATE = 2
CURRENT12_BRICKLET_FUNCTION_SET_CURRENT_CALLBACK_PERIOD = 5
CURRENT12_BRICKLET_FUNCTION_SET_ANALOG_VALUE_CALLBACK_PERIOD = 7
CURRENT12_BRICKLET_FUNCTION_SET_CURRENT_CALLBACK_THRESHOLD = 9
CURRENT12_BRICKLET_FUNCTION_SET_ANALOG_VALUE_CALLBACK_THRESHOLD = 11
CURRENT12_BRICKLET_FUNCTION_SET_DEBOUNCE_PERIOD = 13

pub fn Current12Bricklet::set_response_expected_all(&mut self, response_expected: bool) → ()¶

Parameters:	response_expected – Type: bool

Changes the response expected flag for all setter and callback configuration functions of this device at once.

Constants¶

pub const Current12Bricklet::DEVICE_IDENTIFIER¶

This constant is used to identify a Current12 Bricklet.

The Current12Bricklet::get_identity function and the IpConnection::get_enumerate_callback_receiver callback of the IP Connection have a device_identifier parameter to specify the Brick's or Bricklet's type.

pub const Current12Bricklet::DEVICE_DISPLAY_NAME¶: This constant represents the human readable name of a Current12 Bricklet.