Ruby - Analog Out Bricklet 2.0¶

Simple¶

Download (example_simple.rb)

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24

#!/usr/bin/env ruby
# -*- ruby encoding: utf-8 -*-

require 'tinkerforge/ip_connection'
require 'tinkerforge/bricklet_analog_out_v2'

include Tinkerforge

HOST = 'localhost'
PORT = 4223
UID = 'XYZ' # Change XYZ to the UID of your Analog Out Bricklet 2.0

ipcon = IPConnection.new # Create IP connection
ao = BrickletAnalogOutV2.new UID, ipcon # Create device object

ipcon.connect HOST, PORT # Connect to brickd
# Don't use device before ipcon is connected

# Set output voltage to 3.3V
ao.set_output_voltage 3300

puts 'Press key to exit'
$stdin.gets
ipcon.disconnect

Basic Functions¶

BrickletAnalogOutV2::new(uid, ipcon) → analog_out_v2¶

Parameters:	uid – Type: str ipcon – Type: IPConnection
Returns:	analog_out_v2 – Type: BrickletAnalogOutV2

Creates an object with the unique device ID uid:

analog_out_v2 = BrickletAnalogOutV2.new 'YOUR_DEVICE_UID', ipcon

This object can then be used after the IP Connection is connected.

BrickletAnalogOutV2#set_output_voltage(voltage) → nil¶

Parameters:	voltage – Type: int, Unit: 1 mV, Range: [0 to 12000], Default: 0

Sets the voltage.

BrickletAnalogOutV2#get_output_voltage → int¶

Returns:	voltage – Type: int, Unit: 1 mV, Range: [0 to 12000], Default: 0

Returns the voltage as set by #set_output_voltage.

Advanced Functions¶

BrickletAnalogOutV2#get_input_voltage → int¶

Returns:	voltage – Type: int, Unit: 1 mV, Range: [0 to 15000]

Returns the input voltage.

BrickletAnalogOutV2#get_identity → [str, str, chr, [int, ...], [int, ...], int]¶

Return Array:

0: uid – Type: str, Length: up to 8 1: connected_uid – Type: str, Length: up to 8 2: position – Type: chr, Range: ['a' to 'h', 'z'] 3: hardware_version – Type: [int, ...], Length: 3 0: major – Type: int, Range: [0 to 255] 1: minor – Type: int, Range: [0 to 255] 2: revision – Type: int, Range: [0 to 255] 4: firmware_version – Type: [int, ...], Length: 3 0: major – Type: int, Range: [0 to 255] 1: minor – Type: int, Range: [0 to 255] 2: revision – Type: int, Range: [0 to 255] 5: device_identifier – Type: int, Range: [0 to 216 - 1]

Returns the UID, the UID where the Bricklet is connected to, the position, the hardware and firmware version as well as the device identifier.

The position can be 'a', 'b', 'c', 'd', 'e', 'f', 'g' or 'h' (Bricklet Port). A Bricklet connected to an Isolator Bricklet is always at position 'z'.

The device identifier numbers can be found here. There is also a constant for the device identifier of this Bricklet.

Virtual Functions¶

Virtual functions don't communicate with the device itself, but operate only on the API bindings device object. They can be called without the corresponding IP Connection object being connected.

BrickletAnalogOutV2#get_api_version → [int, ...]¶

Return Array:	0: api_version – Type: [int, ...], Length: 3 0: major – Type: int, Range: [0 to 255] 1: minor – Type: int, Range: [0 to 255] 2: revision – Type: int, Range: [0 to 255]

Returns the version of the API definition implemented by this API bindings. This is neither the release version of this API bindings nor does it tell you anything about the represented Brick or Bricklet.

BrickletAnalogOutV2#get_response_expected(function_id) → bool¶

Parameters:	function_id – Type: int, Range: See constants
Returns:	response_expected – Type: bool

Returns the response expected flag for the function specified by the function ID parameter. It is true if the function is expected to send a response, false otherwise.

For getter functions this is enabled by default and cannot be disabled, because those functions will always send a response. For callback configuration functions it is enabled by default too, but can be disabled by #set_response_expected. For setter functions it is disabled by default and can be enabled.

Enabling the response expected flag for a setter function allows to detect timeouts and other error conditions calls of this setter as well. The device will then send a response for this purpose. If this flag is disabled for a setter function then no response is sent and errors are silently ignored, because they cannot be detected.

The following constants are available for this function:

For function_id:

• BrickletAnalogOutV2::FUNCTION_SET_OUTPUT_VOLTAGE = 1

BrickletAnalogOutV2#set_response_expected(function_id, response_expected) → nil¶

Parameters:	function_id – Type: int, Range: See constants response_expected – Type: bool

Changes the response expected flag of the function specified by the function ID parameter. This flag can only be changed for setter (default value: false) and callback configuration functions (default value: true). For getter functions it is always enabled.

Enabling the response expected flag for a setter function allows to detect timeouts and other error conditions calls of this setter as well. The device will then send a response for this purpose. If this flag is disabled for a setter function then no response is sent and errors are silently ignored, because they cannot be detected.

The following constants are available for this function:

For function_id:

• BrickletAnalogOutV2::FUNCTION_SET_OUTPUT_VOLTAGE = 1

BrickletAnalogOutV2#set_response_expected_all(response_expected) → nil¶

Parameters:	response_expected – Type: bool

Changes the response expected flag for all setter and callback configuration functions of this device at once.

Constants¶

BrickletAnalogOutV2::DEVICE_IDENTIFIER¶

This constant is used to identify a Analog Out Bricklet 2.0.

The #get_identity() function and the IPConnection::CALLBACK_ENUMERATE callback of the IP Connection have a device_identifier parameter to specify the Brick's or Bricklet's type.

BrickletAnalogOutV2::DEVICE_DISPLAY_NAME¶

This constant represents the human readable name of a Analog Out Bricklet 2.0.