Software / API Bindings / Ruby / API Reference and Examples / Bricklets / Barometer Bricklet 2.0

Ruby - Barometer Bricklet 2.0¶

This is the description of the Ruby API bindings for the Barometer Bricklet 2.0. General information and technical specifications for the Barometer Bricklet 2.0 are summarized in its hardware description.

An installation guide for the Ruby API bindings is part of their general description.

Examples¶

The example code below is Public Domain (CC0 1.0).

Callback¶

Download (example_callback.rb)

#!/usr/bin/env ruby
# -*- ruby encoding: utf-8 -*-

require 'tinkerforge/ip_connection'
require 'tinkerforge/bricklet_barometer_v2'

include Tinkerforge

HOST = 'localhost'
PORT = 4223
UID = 'XYZ' # Change XYZ to the UID of your Barometer Bricklet 2.0

ipcon = IPConnection.new # Create IP connection
b = BrickletBarometerV2.new UID, ipcon # Create device object

ipcon.connect HOST, PORT # Connect to brickd
# Don't use device before ipcon is connected

# Register air pressure callback
b.register_callback(BrickletBarometerV2::CALLBACK_AIR_PRESSURE) do |air_pressure|
  puts "Air Pressure: #{air_pressure/1000.0} hPa"
end

# Set period for air pressure callback to 1s (1000ms) without a threshold
b.set_air_pressure_callback_configuration 1000, false, 'x', 0, 0

puts 'Press key to exit'
$stdin.gets
ipcon.disconnect

Simple¶

Download (example_simple.rb)

#!/usr/bin/env ruby
# -*- ruby encoding: utf-8 -*-

require 'tinkerforge/ip_connection'
require 'tinkerforge/bricklet_barometer_v2'

include Tinkerforge

HOST = 'localhost'
PORT = 4223
UID = 'XYZ' # Change XYZ to the UID of your Barometer Bricklet 2.0

ipcon = IPConnection.new # Create IP connection
b = BrickletBarometerV2.new UID, ipcon # Create device object

ipcon.connect HOST, PORT # Connect to brickd
# Don't use device before ipcon is connected

# Get current air pressure
air_pressure = b.get_air_pressure
puts "Air Pressure: #{air_pressure/1000.0} hPa"

# Get current altitude
altitude = b.get_altitude
puts "Altitude: #{altitude/1000.0} m"

puts 'Press key to exit'
$stdin.gets
ipcon.disconnect

Threshold¶

Download (example_threshold.rb)

#!/usr/bin/env ruby
# -*- ruby encoding: utf-8 -*-

require 'tinkerforge/ip_connection'
require 'tinkerforge/bricklet_barometer_v2'

include Tinkerforge

HOST = 'localhost'
PORT = 4223
UID = 'XYZ' # Change XYZ to the UID of your Barometer Bricklet 2.0

ipcon = IPConnection.new # Create IP connection
b = BrickletBarometerV2.new UID, ipcon # Create device object

ipcon.connect HOST, PORT # Connect to brickd
# Don't use device before ipcon is connected

# Register air pressure callback
b.register_callback(BrickletBarometerV2::CALLBACK_AIR_PRESSURE) do |air_pressure|
  puts "Air Pressure: #{air_pressure/1000.0} hPa"
  puts 'Enjoy the potentially good weather!'
end

# Configure threshold for air pressure "greater than 1025 hPa"
# with a debounce period of 1s (1000ms)
b.set_air_pressure_callback_configuration 1000, false, '>', 1025*1000, 0

puts 'Press key to exit'
$stdin.gets
ipcon.disconnect

API¶

All functions listed below are thread-safe.

Basic Functions¶

BrickletBarometerV2::new(uid, ipcon) → barometer_v2¶

Parameters:	uid – Type: str ipcon – Type: IPConnection
Returns:	barometer_v2 – Type: BrickletBarometerV2

Creates an object with the unique device ID uid:

barometer_v2 = BrickletBarometerV2.new 'YOUR_DEVICE_UID', ipcon

This object can then be used after the IP Connection is connected.

BrickletBarometerV2#get_air_pressure → int¶

Returns:	air_pressure – Type: int, Unit: 1/1000 hPa, Range: [260000 to 1260000]

Returns the measured air pressure.

If you want to get the value periodically, it is recommended to use the ::CALLBACK_AIR_PRESSURE callback. You can set the callback configuration with #set_air_pressure_callback_configuration.

BrickletBarometerV2#get_altitude → int¶

Returns:	altitude – Type: int, Unit: 1 mm, Range: [-2³¹ to 2³¹ - 1]

Returns the relative altitude of the air pressure sensor. The value is calculated based on the difference between the current air pressure and the reference air pressure that can be set with #set_reference_air_pressure.

If you want to get the value periodically, it is recommended to use the ::CALLBACK_ALTITUDE callback. You can set the callback configuration with #set_altitude_callback_configuration.

BrickletBarometerV2#get_temperature → int¶

Returns:	temperature – Type: int, Unit: 1/100 °C, Range: [-4000 to 8500]

Returns the temperature of the air pressure sensor.

This temperature is used internally for temperature compensation of the air pressure measurement. It is not as accurate as the temperature measured by the Temperature Bricklet 2.0 or the Temperature IR Bricklet 2.0.

If you want to get the value periodically, it is recommended to use the ::CALLBACK_TEMPERATURE callback. You can set the callback configuration with #set_temperature_callback_configuration.

BrickletBarometerV2#set_moving_average_configuration(moving_average_length_air_pressure, moving_average_length_temperature) → nil¶

Parameters:	moving_average_length_air_pressure – Type: int, Range: [1 to 1000], Default: 100 moving_average_length_temperature – Type: int, Range: [1 to 1000], Default: 100

Sets the length of a moving averaging for the air pressure and temperature measurements.

Setting the length to 1 will turn the averaging off. With less averaging, there is more noise on the data.

If you want to do long term measurements the longest moving average will give the cleanest results.

BrickletBarometerV2#get_moving_average_configuration → [int, int]¶

Return Array:	0: moving_average_length_air_pressure – Type: int, Range: [1 to 1000], Default: 100 1: moving_average_length_temperature – Type: int, Range: [1 to 1000], Default: 100

Returns the moving average configuration as set by #set_moving_average_configuration.

BrickletBarometerV2#set_reference_air_pressure(air_pressure) → nil¶

Parameters:	air_pressure – Type: int, Unit: 1/1000 hPa, Range: [0, 260000 to 1260000], Default: 1013250

Sets the reference air pressure for the altitude calculation. Setting the reference to the current air pressure results in a calculated altitude of 0mm. Passing 0 is a shortcut for passing the current air pressure as reference.

Well known reference values are the Q codes QNH and QFE used in aviation.

BrickletBarometerV2#get_reference_air_pressure → int¶

Returns:	air_pressure – Type: int, Unit: 1/1000 hPa, Range: [260000 to 1260000], Default: 1013250

Returns the reference air pressure as set by #set_reference_air_pressure.

Advanced Functions¶

BrickletBarometerV2#set_calibration(measured_air_pressure, actual_air_pressure) → nil¶

Parameters:	measured_air_pressure – Type: int, Unit: 1/1000 hPa, Range: [0, 260000 to 1260000] actual_air_pressure – Type: int, Unit: 1/1000 hPa, Range: [0, 260000 to 1260000]

Sets the one point calibration (OPC) values for the air pressure measurement.

Before the Bricklet can be calibrated any previous calibration has to be removed by setting measured air pressure and actual air pressure to 0.

Then the current air pressure has to be measured using the Bricklet (measured air pressure) and with an accurate reference barometer (actual air pressure) at the same time and passed to this function.

After proper calibration the air pressure measurement can achieve an accuracy up to 0.2 hPa.

The calibration is saved in the EEPROM of the Bricklet and only needs to be configured once.

BrickletBarometerV2#get_calibration → [int, int]¶

Return Array:	0: measured_air_pressure – Type: int, Unit: 1/1000 hPa, Range: [0, 260000 to 1260000] 1: actual_air_pressure – Type: int, Unit: 1/1000 hPa, Range: [0, 260000 to 1260000]

Returns the air pressure one point calibration values as set by #set_calibration.

BrickletBarometerV2#set_sensor_configuration(data_rate, air_pressure_low_pass_filter) → nil¶

Parameters:	data_rate – Type: int, Range: See constants, Default: 4 air_pressure_low_pass_filter – Type: int, Range: See constants, Default: 1

Configures the data rate and air pressure low pass filter. The low pass filter cut-off frequency (if enabled) can be set to 1/9th or 1/20th of the configure data rate to decrease the noise on the air pressure data.

The low pass filter configuration only applies to the air pressure measurement. There is no low pass filter for the temperature measurement.

A higher data rate will result in a less precise temperature because of self-heating of the sensor. If the accuracy of the temperature reading is important to you, we would recommend the 1Hz data rate.

The following constants are available for this function:

For data_rate:

BrickletBarometerV2::DATA_RATE_OFF = 0
BrickletBarometerV2::DATA_RATE_1HZ = 1
BrickletBarometerV2::DATA_RATE_10HZ = 2
BrickletBarometerV2::DATA_RATE_25HZ = 3
BrickletBarometerV2::DATA_RATE_50HZ = 4
BrickletBarometerV2::DATA_RATE_75HZ = 5

For air_pressure_low_pass_filter:

BrickletBarometerV2::LOW_PASS_FILTER_OFF = 0
BrickletBarometerV2::LOW_PASS_FILTER_1_9TH = 1
BrickletBarometerV2::LOW_PASS_FILTER_1_20TH = 2

BrickletBarometerV2#get_sensor_configuration → [int, int]¶

Return Array:	0: data_rate – Type: int, Range: See constants, Default: 4 1: air_pressure_low_pass_filter – Type: int, Range: See constants, Default: 1

Returns the sensor configuration as set by #set_sensor_configuration.

The following constants are available for this function:

For data_rate:

BrickletBarometerV2::DATA_RATE_OFF = 0
BrickletBarometerV2::DATA_RATE_1HZ = 1
BrickletBarometerV2::DATA_RATE_10HZ = 2
BrickletBarometerV2::DATA_RATE_25HZ = 3
BrickletBarometerV2::DATA_RATE_50HZ = 4
BrickletBarometerV2::DATA_RATE_75HZ = 5

For air_pressure_low_pass_filter:

BrickletBarometerV2::LOW_PASS_FILTER_OFF = 0
BrickletBarometerV2::LOW_PASS_FILTER_1_9TH = 1
BrickletBarometerV2::LOW_PASS_FILTER_1_20TH = 2

BrickletBarometerV2#get_spitfp_error_count → [int, int, int, int]¶

Return Array:	0: error_count_ack_checksum – Type: int, Range: [0 to 2³² - 1] 1: error_count_message_checksum – Type: int, Range: [0 to 2³² - 1] 2: error_count_frame – Type: int, Range: [0 to 2³² - 1] 3: error_count_overflow – Type: int, Range: [0 to 2³² - 1]

Returns the error count for the communication between Brick and Bricklet.

The errors are divided into

ACK checksum errors,
message checksum errors,
framing errors and
overflow errors.

The errors counts are for errors that occur on the Bricklet side. All Bricks have a similar function that returns the errors on the Brick side.

BrickletBarometerV2#set_status_led_config(config) → nil¶

Parameters:	config – Type: int, Range: See constants, Default: 3

Sets the status LED configuration. By default the LED shows communication traffic between Brick and Bricklet, it flickers once for every 10 received data packets.

You can also turn the LED permanently on/off or show a heartbeat.

If the Bricklet is in bootloader mode, the LED is will show heartbeat by default.

The following constants are available for this function:

For config:

BrickletBarometerV2::STATUS_LED_CONFIG_OFF = 0
BrickletBarometerV2::STATUS_LED_CONFIG_ON = 1
BrickletBarometerV2::STATUS_LED_CONFIG_SHOW_HEARTBEAT = 2
BrickletBarometerV2::STATUS_LED_CONFIG_SHOW_STATUS = 3

BrickletBarometerV2#get_status_led_config → int¶

Returns:	config – Type: int, Range: See constants, Default: 3

Returns the configuration as set by #set_status_led_config

The following constants are available for this function:

For config:

BrickletBarometerV2::STATUS_LED_CONFIG_OFF = 0
BrickletBarometerV2::STATUS_LED_CONFIG_ON = 1
BrickletBarometerV2::STATUS_LED_CONFIG_SHOW_HEARTBEAT = 2
BrickletBarometerV2::STATUS_LED_CONFIG_SHOW_STATUS = 3

BrickletBarometerV2#get_chip_temperature → int¶

Returns:	temperature – Type: int, Unit: 1 °C, Range: [-2¹⁵ to 2¹⁵ - 1]

Returns the temperature as measured inside the microcontroller. The value returned is not the ambient temperature!

The temperature is only proportional to the real temperature and it has bad accuracy. Practically it is only useful as an indicator for temperature changes.

BrickletBarometerV2#reset → nil¶

Calling this function will reset the Bricklet. All configurations will be lost.

After a reset you have to create new device objects, calling functions on the existing ones will result in undefined behavior!

BrickletBarometerV2#get_identity → [str, str, chr, [int, ...], [int, ...], int]¶

Return Array:

Return Array:	0: uid – Type: str, Length: up to 8 1: connected_uid – Type: str, Length: up to 8 2: position – Type: chr, Range: ['a' to 'h', 'z'] 3: hardware_version – Type: [int, ...], Length: 3 0: major – Type: int, Range: [0 to 255] 1: minor – Type: int, Range: [0 to 255] 2: revision – Type: int, Range: [0 to 255] 4: firmware_version – Type: [int, ...], Length: 3 0: major – Type: int, Range: [0 to 255] 1: minor – Type: int, Range: [0 to 255] 2: revision – Type: int, Range: [0 to 255] 5: device_identifier – Type: int, Range: [0 to 2¹⁶ - 1]

0: uid – Type: str, Length: up to 8
1: connected_uid – Type: str, Length: up to 8
2: position – Type: chr, Range: ['a' to 'h', 'z']
3: hardware_version – Type: [int, ...], Length: 3

0: major – Type: int, Range: [0 to 255]
1: minor – Type: int, Range: [0 to 255]
2: revision – Type: int, Range: [0 to 255]

4: firmware_version – Type: [int, ...], Length: 3

0: major – Type: int, Range: [0 to 255]
1: minor – Type: int, Range: [0 to 255]
2: revision – Type: int, Range: [0 to 255]

5: device_identifier – Type: int, Range: [0 to 2¹⁶ - 1]

Returns the UID, the UID where the Bricklet is connected to, the position, the hardware and firmware version as well as the device identifier.

The position can be 'a', 'b', 'c', 'd', 'e', 'f', 'g' or 'h' (Bricklet Port). A Bricklet connected to an Isolator Bricklet is always at position 'z'.

The device identifier numbers can be found here. There is also a constant for the device identifier of this Bricklet.

Callback Configuration Functions¶

BrickletBarometerV2#register_callback(callback_id) { |param [, ...]| block } → nil¶

Parameters:	callback_id – Type: int

Registers the given block with the given callback_id.

The available callback IDs with corresponding function signatures are listed below.

BrickletBarometerV2#set_air_pressure_callback_configuration(period, value_has_to_change, option, min, max) → nil¶

Parameters:	period – Type: int, Unit: 1 ms, Range: [0 to 2³² - 1], Default: 0 value_has_to_change – Type: bool, Default: false option – Type: chr, Range: See constants, Default: 'x' min – Type: int, Unit: 1/1000 hPa, Range: [-2³¹ to 2³¹ - 1], Default: 0 max – Type: int, Unit: 1/1000 hPa, Range: [-2³¹ to 2³¹ - 1], Default: 0

The period is the period with which the ::CALLBACK_AIR_PRESSURE callback is triggered periodically. A value of 0 turns the callback off.

If the value has to change-parameter is set to true, the callback is only triggered after the value has changed. If the value didn't change within the period, the callback is triggered immediately on change.

If it is set to false, the callback is continuously triggered with the period, independent of the value.

It is furthermore possible to constrain the callback with thresholds.

The option-parameter together with min/max sets a threshold for the ::CALLBACK_AIR_PRESSURE callback.

The following options are possible:

Option	Description
'x'	Threshold is turned off
'o'	Threshold is triggered when the value is outside the min and max values
'i'	Threshold is triggered when the value is inside or equal to the min and max values
'<'	Threshold is triggered when the value is smaller than the min value (max is ignored)
'>'	Threshold is triggered when the value is greater than the min value (max is ignored)

If the option is set to 'x' (threshold turned off) the callback is triggered with the fixed period.

The following constants are available for this function:

For option:

BrickletBarometerV2::THRESHOLD_OPTION_OFF = 'x'
BrickletBarometerV2::THRESHOLD_OPTION_OUTSIDE = 'o'
BrickletBarometerV2::THRESHOLD_OPTION_INSIDE = 'i'
BrickletBarometerV2::THRESHOLD_OPTION_SMALLER = '<'
BrickletBarometerV2::THRESHOLD_OPTION_GREATER = '>'

BrickletBarometerV2#get_air_pressure_callback_configuration → [int, bool, chr, int, int]¶

Return Array:	0: period – Type: int, Unit: 1 ms, Range: [0 to 2³² - 1], Default: 0 1: value_has_to_change – Type: bool, Default: false 2: option – Type: chr, Range: See constants, Default: 'x' 3: min – Type: int, Unit: 1/1000 hPa, Range: [-2³¹ to 2³¹ - 1], Default: 0 4: max – Type: int, Unit: 1/1000 hPa, Range: [-2³¹ to 2³¹ - 1], Default: 0

Returns the callback configuration as set by #set_air_pressure_callback_configuration.

The following constants are available for this function:

For option:

BrickletBarometerV2::THRESHOLD_OPTION_OFF = 'x'
BrickletBarometerV2::THRESHOLD_OPTION_OUTSIDE = 'o'
BrickletBarometerV2::THRESHOLD_OPTION_INSIDE = 'i'
BrickletBarometerV2::THRESHOLD_OPTION_SMALLER = '<'
BrickletBarometerV2::THRESHOLD_OPTION_GREATER = '>'

BrickletBarometerV2#set_altitude_callback_configuration(period, value_has_to_change, option, min, max) → nil¶

Parameters:	period – Type: int, Unit: 1 ms, Range: [0 to 2³² - 1], Default: 0 value_has_to_change – Type: bool, Default: false option – Type: chr, Range: See constants, Default: 'x' min – Type: int, Unit: 1 mm, Range: [-2³¹ to 2³¹ - 1], Default: 0 max – Type: int, Unit: 1 mm, Range: [-2³¹ to 2³¹ - 1], Default: 0

The period is the period with which the ::CALLBACK_ALTITUDE callback is triggered periodically. A value of 0 turns the callback off.

If it is set to false, the callback is continuously triggered with the period, independent of the value.

It is furthermore possible to constrain the callback with thresholds.

The option-parameter together with min/max sets a threshold for the ::CALLBACK_ALTITUDE callback.

The following options are possible:

Option	Description
'x'	Threshold is turned off
'o'	Threshold is triggered when the value is outside the min and max values
'i'	Threshold is triggered when the value is inside or equal to the min and max values
'<'	Threshold is triggered when the value is smaller than the min value (max is ignored)
'>'	Threshold is triggered when the value is greater than the min value (max is ignored)

If the option is set to 'x' (threshold turned off) the callback is triggered with the fixed period.

The following constants are available for this function:

For option:

BrickletBarometerV2::THRESHOLD_OPTION_OFF = 'x'
BrickletBarometerV2::THRESHOLD_OPTION_OUTSIDE = 'o'
BrickletBarometerV2::THRESHOLD_OPTION_INSIDE = 'i'
BrickletBarometerV2::THRESHOLD_OPTION_SMALLER = '<'
BrickletBarometerV2::THRESHOLD_OPTION_GREATER = '>'

BrickletBarometerV2#get_altitude_callback_configuration → [int, bool, chr, int, int]¶

Return Array:	0: period – Type: int, Unit: 1 ms, Range: [0 to 2³² - 1], Default: 0 1: value_has_to_change – Type: bool, Default: false 2: option – Type: chr, Range: See constants, Default: 'x' 3: min – Type: int, Unit: 1 mm, Range: [-2³¹ to 2³¹ - 1], Default: 0 4: max – Type: int, Unit: 1 mm, Range: [-2³¹ to 2³¹ - 1], Default: 0

Returns the callback configuration as set by #set_altitude_callback_configuration.

The following constants are available for this function:

For option:

BrickletBarometerV2::THRESHOLD_OPTION_OFF = 'x'
BrickletBarometerV2::THRESHOLD_OPTION_OUTSIDE = 'o'
BrickletBarometerV2::THRESHOLD_OPTION_INSIDE = 'i'
BrickletBarometerV2::THRESHOLD_OPTION_SMALLER = '<'
BrickletBarometerV2::THRESHOLD_OPTION_GREATER = '>'

BrickletBarometerV2#set_temperature_callback_configuration(period, value_has_to_change, option, min, max) → nil¶

Parameters:	period – Type: int, Unit: 1 ms, Range: [0 to 2³² - 1], Default: 0 value_has_to_change – Type: bool, Default: false option – Type: chr, Range: See constants, Default: 'x' min – Type: int, Unit: 1/100 °C, Range: [-2³¹ to 2³¹ - 1], Default: 0 max – Type: int, Unit: 1/100 °C, Range: [-2³¹ to 2³¹ - 1], Default: 0

The period is the period with which the ::CALLBACK_TEMPERATURE callback is triggered periodically. A value of 0 turns the callback off.

If it is set to false, the callback is continuously triggered with the period, independent of the value.

It is furthermore possible to constrain the callback with thresholds.

The option-parameter together with min/max sets a threshold for the ::CALLBACK_TEMPERATURE callback.

The following options are possible:

Option	Description
'x'	Threshold is turned off
'o'	Threshold is triggered when the value is outside the min and max values
'i'	Threshold is triggered when the value is inside or equal to the min and max values
'<'	Threshold is triggered when the value is smaller than the min value (max is ignored)
'>'	Threshold is triggered when the value is greater than the min value (max is ignored)

If the option is set to 'x' (threshold turned off) the callback is triggered with the fixed period.

The following constants are available for this function:

For option:

BrickletBarometerV2::THRESHOLD_OPTION_OFF = 'x'
BrickletBarometerV2::THRESHOLD_OPTION_OUTSIDE = 'o'
BrickletBarometerV2::THRESHOLD_OPTION_INSIDE = 'i'
BrickletBarometerV2::THRESHOLD_OPTION_SMALLER = '<'
BrickletBarometerV2::THRESHOLD_OPTION_GREATER = '>'

BrickletBarometerV2#get_temperature_callback_configuration → [int, bool, chr, int, int]¶

Return Array:	0: period – Type: int, Unit: 1 ms, Range: [0 to 2³² - 1], Default: 0 1: value_has_to_change – Type: bool, Default: false 2: option – Type: chr, Range: See constants, Default: 'x' 3: min – Type: int, Unit: 1/100 °C, Range: [-2³¹ to 2³¹ - 1], Default: 0 4: max – Type: int, Unit: 1/100 °C, Range: [-2³¹ to 2³¹ - 1], Default: 0

Returns the callback configuration as set by #set_temperature_callback_configuration.

The following constants are available for this function:

For option:

BrickletBarometerV2::THRESHOLD_OPTION_OFF = 'x'
BrickletBarometerV2::THRESHOLD_OPTION_OUTSIDE = 'o'
BrickletBarometerV2::THRESHOLD_OPTION_INSIDE = 'i'
BrickletBarometerV2::THRESHOLD_OPTION_SMALLER = '<'
BrickletBarometerV2::THRESHOLD_OPTION_GREATER = '>'

Callbacks¶

Callbacks can be registered to receive time critical or recurring data from the device. The registration is done with the #register_callback function of the device object. The first parameter is the callback ID and the second parameter is a block:

barometer_v2.register_callback BrickletBarometerV2::CALLBACK_EXAMPLE, do |param|
  puts "#{param}"
end

The available constants with inherent number and type of parameters are described below.

Note

Using callbacks for recurring events is always preferred compared to using getters. It will use less USB bandwidth and the latency will be a lot better, since there is no round trip time.

BrickletBarometerV2::CALLBACK_AIR_PRESSURE¶

Callback Parameters:	air_pressure – Type: int, Unit: 1/1000 hPa, Range: [260000 to 1260000]

This callback is triggered periodically according to the configuration set by #set_air_pressure_callback_configuration.

The parameter is the same as #get_air_pressure.

BrickletBarometerV2::CALLBACK_ALTITUDE¶

Callback Parameters:	altitude – Type: int, Unit: 1 mm, Range: [-2³¹ to 2³¹ - 1]

This callback is triggered periodically according to the configuration set by #set_altitude_callback_configuration.

The parameter is the same as #get_altitude.

BrickletBarometerV2::CALLBACK_TEMPERATURE¶

Callback Parameters:	temperature – Type: int, Unit: 1/100 °C, Range: [-4000 to 8500]

This callback is triggered periodically according to the configuration set by #set_temperature_callback_configuration.

The parameter is the same as #get_temperature.

Virtual Functions¶

Virtual functions don't communicate with the device itself, but operate only on the API bindings device object. They can be called without the corresponding IP Connection object being connected.

BrickletBarometerV2#get_api_version → [int, ...]¶

Return Array:	0: api_version – Type: [int, ...], Length: 3 0: major – Type: int, Range: [0 to 255] 1: minor – Type: int, Range: [0 to 255] 2: revision – Type: int, Range: [0 to 255]

Returns the version of the API definition implemented by this API bindings. This is neither the release version of this API bindings nor does it tell you anything about the represented Brick or Bricklet.

BrickletBarometerV2#get_response_expected(function_id) → bool¶

Parameters:	function_id – Type: int, Range: See constants
Returns:	response_expected – Type: bool

Returns the response expected flag for the function specified by the function ID parameter. It is true if the function is expected to send a response, false otherwise.

For getter functions this is enabled by default and cannot be disabled, because those functions will always send a response. For callback configuration functions it is enabled by default too, but can be disabled by #set_response_expected. For setter functions it is disabled by default and can be enabled.

Enabling the response expected flag for a setter function allows to detect timeouts and other error conditions calls of this setter as well. The device will then send a response for this purpose. If this flag is disabled for a setter function then no response is sent and errors are silently ignored, because they cannot be detected.

The following constants are available for this function:

For function_id:

BrickletBarometerV2::FUNCTION_SET_AIR_PRESSURE_CALLBACK_CONFIGURATION = 2
BrickletBarometerV2::FUNCTION_SET_ALTITUDE_CALLBACK_CONFIGURATION = 6
BrickletBarometerV2::FUNCTION_SET_TEMPERATURE_CALLBACK_CONFIGURATION = 10
BrickletBarometerV2::FUNCTION_SET_MOVING_AVERAGE_CONFIGURATION = 13
BrickletBarometerV2::FUNCTION_SET_REFERENCE_AIR_PRESSURE = 15
BrickletBarometerV2::FUNCTION_SET_CALIBRATION = 17
BrickletBarometerV2::FUNCTION_SET_SENSOR_CONFIGURATION = 19
BrickletBarometerV2::FUNCTION_SET_WRITE_FIRMWARE_POINTER = 237
BrickletBarometerV2::FUNCTION_SET_STATUS_LED_CONFIG = 239
BrickletBarometerV2::FUNCTION_RESET = 243
BrickletBarometerV2::FUNCTION_WRITE_UID = 248

BrickletBarometerV2#set_response_expected(function_id, response_expected) → nil¶

Parameters:	function_id – Type: int, Range: See constants response_expected – Type: bool

Changes the response expected flag of the function specified by the function ID parameter. This flag can only be changed for setter (default value: false) and callback configuration functions (default value: true). For getter functions it is always enabled.

The following constants are available for this function:

For function_id:

BrickletBarometerV2::FUNCTION_SET_AIR_PRESSURE_CALLBACK_CONFIGURATION = 2
BrickletBarometerV2::FUNCTION_SET_ALTITUDE_CALLBACK_CONFIGURATION = 6
BrickletBarometerV2::FUNCTION_SET_TEMPERATURE_CALLBACK_CONFIGURATION = 10
BrickletBarometerV2::FUNCTION_SET_MOVING_AVERAGE_CONFIGURATION = 13
BrickletBarometerV2::FUNCTION_SET_REFERENCE_AIR_PRESSURE = 15
BrickletBarometerV2::FUNCTION_SET_CALIBRATION = 17
BrickletBarometerV2::FUNCTION_SET_SENSOR_CONFIGURATION = 19
BrickletBarometerV2::FUNCTION_SET_WRITE_FIRMWARE_POINTER = 237
BrickletBarometerV2::FUNCTION_SET_STATUS_LED_CONFIG = 239
BrickletBarometerV2::FUNCTION_RESET = 243
BrickletBarometerV2::FUNCTION_WRITE_UID = 248

BrickletBarometerV2#set_response_expected_all(response_expected) → nil¶

Parameters:	response_expected – Type: bool

Changes the response expected flag for all setter and callback configuration functions of this device at once.

Internal Functions¶

Internal functions are used for maintenance tasks such as flashing a new firmware of changing the UID of a Bricklet. These task should be performed using Brick Viewer instead of using the internal functions directly.

BrickletBarometerV2#set_bootloader_mode(mode) → int¶

Parameters:	mode – Type: int, Range: See constants
Returns:	status – Type: int, Range: See constants

Sets the bootloader mode and returns the status after the requested mode change was instigated.

You can change from bootloader mode to firmware mode and vice versa. A change from bootloader mode to firmware mode will only take place if the entry function, device identifier and CRC are present and correct.

This function is used by Brick Viewer during flashing. It should not be necessary to call it in a normal user program.

The following constants are available for this function:

For mode:

BrickletBarometerV2::BOOTLOADER_MODE_BOOTLOADER = 0
BrickletBarometerV2::BOOTLOADER_MODE_FIRMWARE = 1
BrickletBarometerV2::BOOTLOADER_MODE_BOOTLOADER_WAIT_FOR_REBOOT = 2
BrickletBarometerV2::BOOTLOADER_MODE_FIRMWARE_WAIT_FOR_REBOOT = 3
BrickletBarometerV2::BOOTLOADER_MODE_FIRMWARE_WAIT_FOR_ERASE_AND_REBOOT = 4

For status:

BrickletBarometerV2::BOOTLOADER_STATUS_OK = 0
BrickletBarometerV2::BOOTLOADER_STATUS_INVALID_MODE = 1
BrickletBarometerV2::BOOTLOADER_STATUS_NO_CHANGE = 2
BrickletBarometerV2::BOOTLOADER_STATUS_ENTRY_FUNCTION_NOT_PRESENT = 3
BrickletBarometerV2::BOOTLOADER_STATUS_DEVICE_IDENTIFIER_INCORRECT = 4
BrickletBarometerV2::BOOTLOADER_STATUS_CRC_MISMATCH = 5

BrickletBarometerV2#get_bootloader_mode → int¶

Returns:	mode – Type: int, Range: See constants

Returns the current bootloader mode, see #set_bootloader_mode.

The following constants are available for this function:

For mode:

BrickletBarometerV2::BOOTLOADER_MODE_BOOTLOADER = 0
BrickletBarometerV2::BOOTLOADER_MODE_FIRMWARE = 1
BrickletBarometerV2::BOOTLOADER_MODE_BOOTLOADER_WAIT_FOR_REBOOT = 2
BrickletBarometerV2::BOOTLOADER_MODE_FIRMWARE_WAIT_FOR_REBOOT = 3
BrickletBarometerV2::BOOTLOADER_MODE_FIRMWARE_WAIT_FOR_ERASE_AND_REBOOT = 4

BrickletBarometerV2#set_write_firmware_pointer(pointer) → nil¶

Parameters:	pointer – Type: int, Unit: 1 B, Range: [0 to 2³² - 1]

Sets the firmware pointer for #write_firmware. The pointer has to be increased by chunks of size 64. The data is written to flash every 4 chunks (which equals to one page of size 256).

This function is used by Brick Viewer during flashing. It should not be necessary to call it in a normal user program.

BrickletBarometerV2#write_firmware(data) → int¶

Parameters:	data – Type: [int, ...], Length: 64, Range: [0 to 255]
Returns:	status – Type: int, Range: [0 to 255]

Writes 64 Bytes of firmware at the position as written by #set_write_firmware_pointer before. The firmware is written to flash every 4 chunks.

You can only write firmware in bootloader mode.

This function is used by Brick Viewer during flashing. It should not be necessary to call it in a normal user program.

BrickletBarometerV2#write_uid(uid) → nil¶

Parameters:	uid – Type: int, Range: [0 to 2³² - 1]

Writes a new UID into flash. If you want to set a new UID you have to decode the Base58 encoded UID string into an integer first.

We recommend that you use Brick Viewer to change the UID.

BrickletBarometerV2#read_uid → int¶

Returns:	uid – Type: int, Range: [0 to 2³² - 1]

Returns the current UID as an integer. Encode as Base58 to get the usual string version.

Constants¶

BrickletBarometerV2::DEVICE_IDENTIFIER¶

This constant is used to identify a Barometer Bricklet 2.0.

The #get_identity() function and the IPConnection::CALLBACK_ENUMERATE callback of the IP Connection have a device_identifier parameter to specify the Brick's or Bricklet's type.

BrickletBarometerV2::DEVICE_DISPLAY_NAME¶: This constant represents the human readable name of a Barometer Bricklet 2.0.