Perl - Moisture Bricklet¶

Simple¶

Download (example_simple.pl)

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23

#!/usr/bin/perl

use strict;
use Tinkerforge::IPConnection;
use Tinkerforge::BrickletMoisture;

use constant HOST => 'localhost';
use constant PORT => 4223;
use constant UID => 'XYZ'; # Change XYZ to the UID of your Moisture Bricklet

my $ipcon = Tinkerforge::IPConnection->new(); # Create IP connection
my $m = Tinkerforge::BrickletMoisture->new(&UID, $ipcon); # Create device object

$ipcon->connect(&HOST, &PORT); # Connect to brickd
# Don't use device before ipcon is connected

# Get current moisture value
my $moisture = $m->get_moisture_value();
print "Moisture Value: $moisture\n";

print "Press key to exit\n";
<STDIN>;
$ipcon->disconnect();

Callback¶

Download (example_callback.pl)

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35

#!/usr/bin/perl

use strict;
use Tinkerforge::IPConnection;
use Tinkerforge::BrickletMoisture;

use constant HOST => 'localhost';
use constant PORT => 4223;
use constant UID => 'XYZ'; # Change XYZ to the UID of your Moisture Bricklet

# Callback subroutine for moisture value callback
sub cb_moisture
{
    my ($moisture) = @_;

    print "Moisture Value: $moisture\n";
}

my $ipcon = Tinkerforge::IPConnection->new(); # Create IP connection
my $m = Tinkerforge::BrickletMoisture->new(&UID, $ipcon); # Create device object

$ipcon->connect(&HOST, &PORT); # Connect to brickd
# Don't use device before ipcon is connected

# Register moisture value callback to subroutine cb_moisture
$m->register_callback($m->CALLBACK_MOISTURE, 'cb_moisture');

# Set period for moisture value callback to 1s (1000ms)
# Note: The moisture value callback is only called every second
#       if the moisture value has changed since the last call!
$m->set_moisture_callback_period(1000);

print "Press key to exit\n";
<STDIN>;
$ipcon->disconnect();

Threshold¶

Download (example_threshold.pl)

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36

#!/usr/bin/perl

use strict;
use Tinkerforge::IPConnection;
use Tinkerforge::BrickletMoisture;

use constant HOST => 'localhost';
use constant PORT => 4223;
use constant UID => 'XYZ'; # Change XYZ to the UID of your Moisture Bricklet

# Callback subroutine for moisture value reached callback
sub cb_moisture_reached
{
    my ($moisture) = @_;

    print "Moisture Value: $moisture\n";
}

my $ipcon = Tinkerforge::IPConnection->new(); # Create IP connection
my $m = Tinkerforge::BrickletMoisture->new(&UID, $ipcon); # Create device object

$ipcon->connect(&HOST, &PORT); # Connect to brickd
# Don't use device before ipcon is connected

# Get threshold callbacks with a debounce time of 1 second (1000ms)
$m->set_debounce_period(1000);

# Register moisture value reached callback to subroutine cb_moisture_reached
$m->register_callback($m->CALLBACK_MOISTURE_REACHED, 'cb_moisture_reached');

# Configure threshold for moisture value "greater than 200"
$m->set_moisture_callback_threshold('>', 200, 0);

print "Press key to exit\n";
<STDIN>;
$ipcon->disconnect();

Basic Functions¶

BrickletMoisture->new($uid, $ipcon)¶

Parameters:	$uid – Type: string $ipcon – Type: IPConnection
Returns:	$moisture – Type: BrickletMoisture

Creates an object with the unique device ID $uid:

$moisture = BrickletMoisture->new("YOUR_DEVICE_UID", $ipcon);

This object can then be used after the IP Connection is connected.

BrickletMoisture->get_moisture_value()¶

Returns:	$moisture – Type: int, Range: [0 to 212 - 1]

Returns the current moisture value. A small value corresponds to little moisture, a big value corresponds to much moisture.

If you want to get the moisture value periodically, it is recommended to use the CALLBACK_MOISTURE callback and set the period with set_moisture_callback_period().

Advanced Functions¶

BrickletMoisture->set_moving_average($average)¶

Parameters:	$average – Type: int, Range: [0 to 100], Default: 100
Returns:	undef

Sets the length of a moving averaging for the moisture value.

Setting the length to 0 will turn the averaging completely off. With less averaging, there is more noise on the data.

BrickletMoisture->get_moving_average()¶

Returns:	$average – Type: int, Range: [0 to 100], Default: 100

Returns the length moving average as set by set_moving_average().

BrickletMoisture->get_identity()¶

Return Array:

0: $uid – Type: string, Length: up to 8 1: $connected_uid – Type: string, Length: up to 8 2: $position – Type: char, Range: ['a' to 'h', 'z'] 3: \@hardware_version – Type: [int, ...], Length: 3 0: $major – Type: int, Range: [0 to 255] 1: $minor – Type: int, Range: [0 to 255] 2: $revision – Type: int, Range: [0 to 255] 4: \@firmware_version – Type: [int, ...], Length: 3 0: $major – Type: int, Range: [0 to 255] 1: $minor – Type: int, Range: [0 to 255] 2: $revision – Type: int, Range: [0 to 255] 5: $device_identifier – Type: int, Range: [0 to 216 - 1]

Returns the UID, the UID where the Bricklet is connected to, the position, the hardware and firmware version as well as the device identifier.

The position can be 'a', 'b', 'c', 'd', 'e', 'f', 'g' or 'h' (Bricklet Port). A Bricklet connected to an Isolator Bricklet is always at position 'z'.

The device identifier numbers can be found here. There is also a constant for the device identifier of this Bricklet.

Callback Configuration Functions¶

BrickletMoisture->register_callback($callback_id, $function)¶

Parameters:	$callback_id – Type: int $function – Type: string
Returns:	undef

Registers the given $function name with the given $callback_id.

The available callback IDs with corresponding function signatures are listed below.

BrickletMoisture->set_moisture_callback_period($period)¶

Parameters:	$period – Type: int, Unit: 1 ms, Range: [0 to 232 - 1], Default: 0
Returns:	undef

Sets the period with which the CALLBACK_MOISTURE callback is triggered periodically. A value of 0 turns the callback off.

The CALLBACK_MOISTURE callback is only triggered if the moisture value has changed since the last triggering.

BrickletMoisture->get_moisture_callback_period()¶

Returns:	$period – Type: int, Unit: 1 ms, Range: [0 to 232 - 1], Default: 0

Returns the period as set by set_moisture_callback_period().

BrickletMoisture->set_moisture_callback_threshold($option, $min, $max)¶

Parameters:	$option – Type: char, Range: See constants, Default: 'x' $min – Type: int, Range: [0 to 216 - 1], Default: 0 $max – Type: int, Range: [0 to 216 - 1], Default: 0
Returns:	undef

Sets the thresholds for the CALLBACK_MOISTURE_REACHED callback.

The following options are possible:

Option	Description
'x'	Callback is turned off
'o'	Callback is triggered when the moisture value is outside the min and max values
'i'	Callback is triggered when the moisture value is inside the min and max values
'<'	Callback is triggered when the moisture value is smaller than the min value (max is ignored)
'>'	Callback is triggered when the moisture value is greater than the min value (max is ignored)

The following constants are available for this function:

For $option:

• BrickletMoisture->THRESHOLD_OPTION_OFF = 'x'
• BrickletMoisture->THRESHOLD_OPTION_OUTSIDE = 'o'
• BrickletMoisture->THRESHOLD_OPTION_INSIDE = 'i'
• BrickletMoisture->THRESHOLD_OPTION_SMALLER = '<'
• BrickletMoisture->THRESHOLD_OPTION_GREATER = '>'

BrickletMoisture->get_moisture_callback_threshold()¶

Return Array:	0: $option – Type: char, Range: See constants, Default: 'x' 1: $min – Type: int, Range: [0 to 216 - 1], Default: 0 2: $max – Type: int, Range: [0 to 216 - 1], Default: 0

Returns the threshold as set by set_moisture_callback_threshold().

The following constants are available for this function:

For $option:

• BrickletMoisture->THRESHOLD_OPTION_OFF = 'x'
• BrickletMoisture->THRESHOLD_OPTION_OUTSIDE = 'o'
• BrickletMoisture->THRESHOLD_OPTION_INSIDE = 'i'
• BrickletMoisture->THRESHOLD_OPTION_SMALLER = '<'
• BrickletMoisture->THRESHOLD_OPTION_GREATER = '>'

BrickletMoisture->set_debounce_period($debounce)¶

Parameters:	$debounce – Type: int, Unit: 1 ms, Range: [0 to 232 - 1], Default: 100
Returns:	undef

Sets the period with which the threshold callback

• CALLBACK_MOISTURE_REACHED

is triggered, if the threshold

• set_moisture_callback_threshold()

keeps being reached.

BrickletMoisture->get_debounce_period()¶

Returns:	$debounce – Type: int, Unit: 1 ms, Range: [0 to 232 - 1], Default: 100

Returns the debounce period as set by set_debounce_period().

Callbacks¶

Callbacks can be registered to receive time critical or recurring data from the device. The registration is done with the register_callback() function of the device object. The first parameter is the callback ID and the second parameter the callback function name:

sub my_callback
{
    print "@_[0]";
}

$moisture->register_callback(BrickletMoisture->CALLBACK_EXAMPLE, 'my_callback')

The callback function will be called from an internal thread of the IP Connection. In contrast to many other programming languages, variables are not automatically shared between threads in Perl. If you want to share a global variable between a callback function and the rest for your program it has to be marked as :shared. See the documentation of the threads::shared Perl module for more details.

The available constants with inherent number and type of parameters are described below.

BrickletMoisture->CALLBACK_MOISTURE¶

Callback Parameters:	$moisture – Type: int, Range: [0 to 212 - 1]

This callback is triggered periodically with the period that is set by set_moisture_callback_period(). The parameter is the moisture value of the sensor.

The CALLBACK_MOISTURE callback is only triggered if the moisture value has changed since the last triggering.

BrickletMoisture->CALLBACK_MOISTURE_REACHED¶

Callback Parameters:	$moisture – Type: int, Range: [0 to 212 - 1]

This callback is triggered when the threshold as set by set_moisture_callback_threshold() is reached. The parameter is the moisture value of the sensor.

If the threshold keeps being reached, the callback is triggered periodically with the period as set by set_debounce_period().

Virtual Functions¶

Virtual functions don't communicate with the device itself, but operate only on the API bindings device object. They can be called without the corresponding IP Connection object being connected.

BrickletMoisture->get_api_version()¶

Return Array:	0: \@api_version – Type: [int, ...], Length: 3 0: $major – Type: int, Range: [0 to 255] 1: $minor – Type: int, Range: [0 to 255] 2: $revision – Type: int, Range: [0 to 255]

Returns the version of the API definition implemented by this API bindings. This is neither the release version of this API bindings nor does it tell you anything about the represented Brick or Bricklet.

BrickletMoisture->get_response_expected($function_id)¶

Parameters:	$function_id – Type: int, Range: See constants
Returns:	$response_expected – Type: bool

Returns the response expected flag for the function specified by the function ID parameter. It is true if the function is expected to send a response, false otherwise.

For getter functions this is enabled by default and cannot be disabled, because those functions will always send a response. For callback configuration functions it is enabled by default too, but can be disabled by set_response_expected(). For setter functions it is disabled by default and can be enabled.

Enabling the response expected flag for a setter function allows to detect timeouts and other error conditions calls of this setter as well. The device will then send a response for this purpose. If this flag is disabled for a setter function then no response is sent and errors are silently ignored, because they cannot be detected.

The following constants are available for this function:

For $function_id:

• BrickletMoisture->FUNCTION_SET_MOISTURE_CALLBACK_PERIOD = 2
• BrickletMoisture->FUNCTION_SET_MOISTURE_CALLBACK_THRESHOLD = 4
• BrickletMoisture->FUNCTION_SET_DEBOUNCE_PERIOD = 6
• BrickletMoisture->FUNCTION_SET_MOVING_AVERAGE = 10

BrickletMoisture->set_response_expected($function_id, $response_expected)¶

Parameters:	$function_id – Type: int, Range: See constants $response_expected – Type: bool
Returns:	undef

Changes the response expected flag of the function specified by the function ID parameter. This flag can only be changed for setter (default value: false) and callback configuration functions (default value: true). For getter functions it is always enabled.

Enabling the response expected flag for a setter function allows to detect timeouts and other error conditions calls of this setter as well. The device will then send a response for this purpose. If this flag is disabled for a setter function then no response is sent and errors are silently ignored, because they cannot be detected.

The following constants are available for this function:

For $function_id:

• BrickletMoisture->FUNCTION_SET_MOISTURE_CALLBACK_PERIOD = 2
• BrickletMoisture->FUNCTION_SET_MOISTURE_CALLBACK_THRESHOLD = 4
• BrickletMoisture->FUNCTION_SET_DEBOUNCE_PERIOD = 6
• BrickletMoisture->FUNCTION_SET_MOVING_AVERAGE = 10

BrickletMoisture->set_response_expected_all($response_expected)¶

Parameters:	$response_expected – Type: bool
Returns:	undef

Changes the response expected flag for all setter and callback configuration functions of this device at once.

Constants¶

BrickletMoisture->DEVICE_IDENTIFIER¶

This constant is used to identify a Moisture Bricklet.

The get_identity() function and the IPConnection->CALLBACK_ENUMERATE callback of the IP Connection have a device_identifier parameter to specify the Brick's or Bricklet's type.

BrickletMoisture->DEVICE_DISPLAY_NAME¶

This constant represents the human readable name of a Moisture Bricklet.