Software / API Bindings / C/C++ for Microcontrollers / API Reference and Examples / Bricklets / Segment Display 4x7 Bricklet 2.0

C/C++ for Microcontrollers - Segment Display 4x7 Bricklet 2.0¶

This is the description of the C/C++ for Microcontrollers API bindings for the Segment Display 4x7 Bricklet 2.0. General information and technical specifications for the Segment Display 4x7 Bricklet 2.0 are summarized in its hardware description.

An installation guide for the C/C++ for Microcontrollers API bindings is part of their general description.

Examples¶

The example code below is Public Domain (CC0 1.0).

Numeric Value¶

Download (example_numeric_value.c)

// This example is not self-contained.
// It requires usage of the example driver specific to your platform.
// See the HAL documentation.

#include "src/bindings/hal_common.h"
#include "src/bindings/bricklet_segment_display_4x7_v2.h"

void check(int rc, const char *msg);
void example_setup(TF_HAL *hal);
void example_loop(TF_HAL *hal);

static TF_SegmentDisplay4x7V2 sd;

void example_setup(TF_HAL *hal) {
    // Create device object
    check(tf_segment_display_4x7_v2_create(&sd, NULL, hal), "create device object");

    check(tf_segment_display_4x7_v2_set_brightness(&sd,
                                                   7), "call set_brightness"); // Set to full brightness

    // Show "- 42" on the Display
    int8_t value[4] = {-2, -1, 4, 2};
    check(tf_segment_display_4x7_v2_set_numeric_value(&sd,
                                                      value), "call set_numeric_value");
}

void example_loop(TF_HAL *hal) {
    // Poll for callbacks
    tf_hal_callback_tick(hal, 0);
}

Set Segments¶

Download (example_set_segments.c)

// This example is not self-contained.
// It requires usage of the example driver specific to your platform.
// See the HAL documentation.

#include "src/bindings/hal_common.h"
#include "src/bindings/bricklet_segment_display_4x7_v2.h"

void check(int rc, const char *msg);
void example_setup(TF_HAL *hal);
void example_loop(TF_HAL *hal);

static TF_SegmentDisplay4x7V2 sd;

void example_setup(TF_HAL *hal) {
    // Create device object
    check(tf_segment_display_4x7_v2_create(&sd, NULL, hal), "create device object");

    check(tf_segment_display_4x7_v2_set_brightness(&sd,
                                                   7), "call set_brightness"); // Set to full brightness

    // Activate all segments
    bool digit0[8] = {true, true, true, true, true, true, true, true};
    bool digit1[8] = {true, true, true, true, true, true, true, true};
    bool digit2[8] = {true, true, true, true, true, true, true, true};
    bool digit3[8] = {true, true, true, true, true, true, true, true};
    bool colon[2] = {true, true};
    check(tf_segment_display_4x7_v2_set_segments(&sd, digit0, digit1, digit2, digit3,
                                                 colon, true), "call set_segments");
}

void example_loop(TF_HAL *hal) {
    // Poll for callbacks
    tf_hal_callback_tick(hal, 0);
}

Blink Colon¶

Download (example_blink_colon.c)

// This example is not self-contained.
// It requires usage of the example driver specific to your platform.
// See the HAL documentation.

#include "src/bindings/hal_common.h"
#include "src/bindings/bricklet_segment_display_4x7_v2.h"

void check(int rc, const char *msg);
void example_setup(TF_HAL *hal);
void example_loop(TF_HAL *hal);

static TF_SegmentDisplay4x7V2 sd;

void example_setup(TF_HAL *hal) {
    // Create device object
    check(tf_segment_display_4x7_v2_create(&sd, NULL, hal), "create device object");

    check(tf_segment_display_4x7_v2_set_brightness(&sd,
                                                   7), "call set_brightness"); // Set to full brightness

    // Blink colon 10 times
    int i;
    for (i = 0; i < 10; ++i) {

        // Activate segments of colon
        check(tf_segment_display_4x7_v2_set_selected_segment(&sd, 32,
                                                             true), "call set_selected_segment");
        check(tf_segment_display_4x7_v2_set_selected_segment(&sd, 33,
                                                             true), "call set_selected_segment");

        tf_hal_sleep_us(hal, 250 * 1000);

        // Deactivate segments of colon
        check(tf_segment_display_4x7_v2_set_selected_segment(&sd, 32,
                                                             false), "call set_selected_segment");
        check(tf_segment_display_4x7_v2_set_selected_segment(&sd, 33,
                                                             false), "call set_selected_segment");
    }
}

void example_loop(TF_HAL *hal) {
    // Poll for callbacks
    tf_hal_callback_tick(hal, 0);
}

API¶

Most functions of the C/C++ bindings for microcontrollers return an error code (e_code).

Possible error codes are:

TF_E_OK = 0
TF_E_TIMEOUT = -1
TF_E_INVALID_PARAMETER = -2
TF_E_NOT_SUPPORTED = -3
TF_E_UNKNOWN_ERROR_CODE = -4
TF_E_STREAM_OUT_OF_SYNC = -5
TF_E_INVALID_CHAR_IN_UID = -6
TF_E_UID_TOO_LONG = -7
TF_E_UID_OVERFLOW = -8
TF_E_TOO_MANY_DEVICES = -9
TF_E_DEVICE_NOT_FOUND = -10
TF_E_WRONG_DEVICE_TYPE = -11
TF_E_LOCKED = -12
TF_E_PORT_NOT_FOUND = -13

(as defined in errors.h) as well as the errors returned from the hardware abstraction layer (HAL) that is used.

Use :cpp:func`tf_hal_strerror` (defined in the HAL's header file) to get an error string for an error code.

Data returned from the device, when a getter is called, is handled via output parameters. These parameters are labeled with the ret_ prefix. The bindings will not write to an output parameter if NULL or nullptr is passed. This can be used to ignore outputs that you are not interested in.

None of the functions listed below are thread-safe. See the API bindings description for details.

Basic Functions¶

int tf_segment_display_4x7_v2_create(TF_SegmentDisplay4x7V2 *segment_display_4x7_v2, const char *uid_or_port_name, TF_HAL *hal)¶

Parameters:	segment_display_4x7_v2 – Type: TF_SegmentDisplay4x7V2 * uid – Type: const char * hal – Type: TF_HAL *
Returns:	e_code – Type: int

Creates the device object segment_display_4x7_v2 with the optional unique device ID or port name uid_or_port_name and adds it to the HAL hal:

TF_SegmentDisplay4x7V2 segment_display_4x7_v2;
tf_segment_display_4x7_v2_create(&segment_display_4x7_v2, NULL, &hal);

Normally uid_or_port_name can stay NULL. For more details about this see section UID or Port Name.

int tf_segment_display_4x7_v2_destroy(TF_SegmentDisplay4x7V2 *segment_display_4x7_v2)¶

Parameters:	segment_display_4x7_v2 – Type: TF_SegmentDisplay4x7V2 *
Returns:	e_code – Type: int

Removes the device object segment_display_4x7_v2 from its HAL and destroys it. The device object cannot be used anymore afterwards.

int tf_segment_display_4x7_v2_set_segments(TF_SegmentDisplay4x7V2 *segment_display_4x7_v2, const bool digit0[8], const bool digit1[8], const bool digit2[8], const bool digit3[8], const bool colon[2], bool tick)¶

Parameters:	segment_display_4x7_v2 – Type: TF_SegmentDisplay4x7V2 * digit0 – Type: const bool[8] digit1 – Type: const bool[8] digit2 – Type: const bool[8] digit3 – Type: const bool[8] colon – Type: const bool[2] tick – Type: bool
Returns:	e_code – Type: int

Sets the segments of the Segment Display 4x7 Bricklet 2.0 segment-by-segment.

The data is split into the four digits, two colon dots and the tick mark.

The indices of the segments in the digit and colon parameters are as follows:

int tf_segment_display_4x7_v2_get_segments(TF_SegmentDisplay4x7V2 *segment_display_4x7_v2, bool ret_digit0[8], bool ret_digit1[8], bool ret_digit2[8], bool ret_digit3[8], bool ret_colon[2], bool *ret_tick)¶

Parameters:	segment_display_4x7_v2 – Type: TF_SegmentDisplay4x7V2 *
Output Parameters:	ret_digit0 – Type: bool[8] ret_digit1 – Type: bool[8] ret_digit2 – Type: bool[8] ret_digit3 – Type: bool[8] ret_colon – Type: bool[2] ret_tick – Type: bool
Returns:	e_code – Type: int

Returns the segment data as set by tf_segment_display_4x7_v2_set_segments().

int tf_segment_display_4x7_v2_set_brightness(TF_SegmentDisplay4x7V2 *segment_display_4x7_v2, uint8_t brightness)¶

Parameters:	segment_display_4x7_v2 – Type: TF_SegmentDisplay4x7V2 * brightness – Type: uint8_t, Range: [0 to 7], Default: 7
Returns:	e_code – Type: int

The brightness can be set between 0 (dark) and 7 (bright).

int tf_segment_display_4x7_v2_get_brightness(TF_SegmentDisplay4x7V2 *segment_display_4x7_v2, uint8_t *ret_brightness)¶

Parameters:	segment_display_4x7_v2 – Type: TF_SegmentDisplay4x7V2 *
Output Parameters:	ret_brightness – Type: uint8_t, Range: [0 to 7], Default: 7
Returns:	e_code – Type: int

Returns the brightness as set by tf_segment_display_4x7_v2_set_brightness().

int tf_segment_display_4x7_v2_set_numeric_value(TF_SegmentDisplay4x7V2 *segment_display_4x7_v2, const int8_t value[4])¶

Parameters:	segment_display_4x7_v2 – Type: TF_SegmentDisplay4x7V2 * value – Type: const int8_t[4], Range: [-2 to 15]
Returns:	e_code – Type: int

Sets a numeric value for each of the digits. They represent:

-2: minus sign
-1: blank
0-9: 0-9
10: A
11: b
12: C
13: d
14: E
15: F

Example: A call with [-2, -1, 4, 2] will result in a display of "- 42".

int tf_segment_display_4x7_v2_set_selected_segment(TF_SegmentDisplay4x7V2 *segment_display_4x7_v2, uint8_t segment, bool value)¶

Parameters:	segment_display_4x7_v2 – Type: TF_SegmentDisplay4x7V2 * segment – Type: uint8_t, Range: [0 to 34] value – Type: bool
Returns:	e_code – Type: int

Turns one specified segment on or off.

The indices of the segments are as follows:

int tf_segment_display_4x7_v2_get_selected_segment(TF_SegmentDisplay4x7V2 *segment_display_4x7_v2, uint8_t segment, bool *ret_value)¶

Parameters:	segment_display_4x7_v2 – Type: TF_SegmentDisplay4x7V2 * segment – Type: uint8_t, Range: [0 to 34]
Output Parameters:	ret_value – Type: bool
Returns:	e_code – Type: int

Returns the value of a single segment.

Advanced Functions¶

int tf_segment_display_4x7_v2_start_counter(TF_SegmentDisplay4x7V2 *segment_display_4x7_v2, int16_t value_from, int16_t value_to, int16_t increment, uint32_t length)¶

Parameters:	segment_display_4x7_v2 – Type: TF_SegmentDisplay4x7V2 * value_from – Type: int16_t, Range: [-999 to 9999] value_to – Type: int16_t, Range: [-999 to 9999] increment – Type: int16_t, Range: [-999 to 9999] length – Type: uint32_t, Unit: 1 ms, Range: [0 to 2³² - 1]
Returns:	e_code – Type: int

Starts a counter with the from value that counts to the to value with the each step incremented by increment. length is the pause between each increment.

Example: If you set from to 0, to to 100, increment to 1 and length to 1000, a counter that goes from 0 to 100 with one second pause between each increment will be started.

Using a negative increment allows to count backwards.

You can stop the counter at every time by calling tf_segment_display_4x7_v2_set_segments() or tf_segment_display_4x7_v2_set_numeric_value().

int tf_segment_display_4x7_v2_get_counter_value(TF_SegmentDisplay4x7V2 *segment_display_4x7_v2, uint16_t *ret_value)¶

Parameters:	segment_display_4x7_v2 – Type: TF_SegmentDisplay4x7V2 *
Output Parameters:	ret_value – Type: uint16_t, Range: [-999 to 9999]
Returns:	e_code – Type: int

Returns the counter value that is currently shown on the display.

If there is no counter running a 0 will be returned.

int tf_segment_display_4x7_v2_get_spitfp_error_count(TF_SegmentDisplay4x7V2 *segment_display_4x7_v2, uint32_t *ret_error_count_ack_checksum, uint32_t *ret_error_count_message_checksum, uint32_t *ret_error_count_frame, uint32_t *ret_error_count_overflow)¶

Parameters:	segment_display_4x7_v2 – Type: TF_SegmentDisplay4x7V2 *
Output Parameters:	ret_error_count_ack_checksum – Type: uint32_t, Range: [0 to 2³² - 1] ret_error_count_message_checksum – Type: uint32_t, Range: [0 to 2³² - 1] ret_error_count_frame – Type: uint32_t, Range: [0 to 2³² - 1] ret_error_count_overflow – Type: uint32_t, Range: [0 to 2³² - 1]
Returns:	e_code – Type: int

Returns the error count for the communication between Brick and Bricklet.

The errors are divided into

ACK checksum errors,
message checksum errors,
framing errors and
overflow errors.

The errors counts are for errors that occur on the Bricklet side. All Bricks have a similar function that returns the errors on the Brick side.

int tf_segment_display_4x7_v2_set_status_led_config(TF_SegmentDisplay4x7V2 *segment_display_4x7_v2, uint8_t config)¶

Parameters:	segment_display_4x7_v2 – Type: TF_SegmentDisplay4x7V2 * config – Type: uint8_t, Range: See constants, Default: 3
Returns:	e_code – Type: int

Sets the status LED configuration. By default the LED shows communication traffic between Brick and Bricklet, it flickers once for every 10 received data packets.

You can also turn the LED permanently on/off or show a heartbeat.

If the Bricklet is in bootloader mode, the LED is will show heartbeat by default.

The following constants are available for this function:

For config:

TF_SEGMENT_DISPLAY_4X7_V2_STATUS_LED_CONFIG_OFF = 0
TF_SEGMENT_DISPLAY_4X7_V2_STATUS_LED_CONFIG_ON = 1
TF_SEGMENT_DISPLAY_4X7_V2_STATUS_LED_CONFIG_SHOW_HEARTBEAT = 2
TF_SEGMENT_DISPLAY_4X7_V2_STATUS_LED_CONFIG_SHOW_STATUS = 3

int tf_segment_display_4x7_v2_get_status_led_config(TF_SegmentDisplay4x7V2 *segment_display_4x7_v2, uint8_t *ret_config)¶

Parameters:	segment_display_4x7_v2 – Type: TF_SegmentDisplay4x7V2 *
Output Parameters:	ret_config – Type: uint8_t, Range: See constants, Default: 3
Returns:	e_code – Type: int

Returns the configuration as set by tf_segment_display_4x7_v2_set_status_led_config()

The following constants are available for this function:

For ret_config:

TF_SEGMENT_DISPLAY_4X7_V2_STATUS_LED_CONFIG_OFF = 0
TF_SEGMENT_DISPLAY_4X7_V2_STATUS_LED_CONFIG_ON = 1
TF_SEGMENT_DISPLAY_4X7_V2_STATUS_LED_CONFIG_SHOW_HEARTBEAT = 2
TF_SEGMENT_DISPLAY_4X7_V2_STATUS_LED_CONFIG_SHOW_STATUS = 3

int tf_segment_display_4x7_v2_get_chip_temperature(TF_SegmentDisplay4x7V2 *segment_display_4x7_v2, int16_t *ret_temperature)¶

Parameters:	segment_display_4x7_v2 – Type: TF_SegmentDisplay4x7V2 *
Output Parameters:	ret_temperature – Type: int16_t, Unit: 1 °C, Range: [-2¹⁵ to 2¹⁵ - 1]
Returns:	e_code – Type: int

Returns the temperature as measured inside the microcontroller. The value returned is not the ambient temperature!

The temperature is only proportional to the real temperature and it has bad accuracy. Practically it is only useful as an indicator for temperature changes.

int tf_segment_display_4x7_v2_reset(TF_SegmentDisplay4x7V2 *segment_display_4x7_v2)¶

Parameters:	segment_display_4x7_v2 – Type: TF_SegmentDisplay4x7V2 *
Returns:	e_code – Type: int

Calling this function will reset the Bricklet. All configurations will be lost.

After a reset you have to create new device objects, calling functions on the existing ones will result in undefined behavior!

int tf_segment_display_4x7_v2_get_identity(TF_SegmentDisplay4x7V2 *segment_display_4x7_v2, char ret_uid[8], char ret_connected_uid[8], char *ret_position, uint8_t ret_hardware_version[3], uint8_t ret_firmware_version[3], uint16_t *ret_device_identifier)¶

Parameters:	segment_display_4x7_v2 – Type: TF_SegmentDisplay4x7V2 *
Output Parameters:	ret_uid – Type: char[8] ret_connected_uid – Type: char[8] ret_position – Type: char, Range: ['a' to 'h', 'z'] ret_hardware_version – Type: uint8_t[3] 0: major – Type: uint8_t, Range: [0 to 255] 1: minor – Type: uint8_t, Range: [0 to 255] 2: revision – Type: uint8_t, Range: [0 to 255] ret_firmware_version – Type: uint8_t[3] 0: major – Type: uint8_t, Range: [0 to 255] 1: minor – Type: uint8_t, Range: [0 to 255] 2: revision – Type: uint8_t, Range: [0 to 255] ret_device_identifier – Type: uint16_t, Range: [0 to 2¹⁶ - 1]
Returns:	e_code – Type: int

Returns the UID, the UID where the Bricklet is connected to, the position, the hardware and firmware version as well as the device identifier.

The position can be 'a', 'b', 'c', 'd', 'e', 'f', 'g' or 'h' (Bricklet Port). A Bricklet connected to an Isolator Bricklet is always at position 'z'.

The device identifier numbers can be found here. There is also a constant for the device identifier of this Bricklet.

Callback Configuration Functions¶

Callbacks¶

Callbacks can be registered to receive time critical or recurring data from the device. The registration is done with the corresponding tf_segment_display_4x7_v2_register_*_callback function. The user_data passed to the registration function as well as the device that triggered the callback are passed to the registered callback handler.

Only one handler can be registered to a callback at the same time. To deregister a callback, call the tf_segment_display_4x7_v2_register_*_callback function with NULL as handler.

Note

Using callbacks for recurring events is preferred compared to using getters. Polling for a callback requires writing one byte only. See here Optimizing Performance.

Warning

Calling bindings function from inside a callback handler is not allowed. See here Thread safety.

int tf_segment_display_4x7_v2_register_counter_finished_callback(TF_SegmentDisplay4x7V2 *segment_display_4x7_v2, TF_SegmentDisplay4x7V2_CounterFinishedHandler handler, void *user_data)¶

void handler(TF_SegmentDisplay4x7V2 *segment_display_4x7_v2, void *user_data)

Callback Parameters:	segment_display_4x7_v2 – Type: TF_SegmentDisplay4x7V2 * user_data – Type: void *

This callback is triggered when the counter (see tf_segment_display_4x7_v2_start_counter()) is finished.

Virtual Functions¶

Virtual functions don't communicate with the device itself, but operate only on the API bindings device object.

int tf_segment_display_4x7_v2_get_response_expected(TF_SegmentDisplay4x7V2 *segment_display_4x7_v2, uint8_t function_id, bool *ret_response_expected)¶

Parameters:	segment_display_4x7_v2 – Type: TF_SegmentDisplay4x7V2 * function_id – Type: uint8_t, Range: See constants
Output Parameters:	ret_response_expected – Type: bool
Returns:	e_code – Type: int

Returns the response expected flag for the function specified by the function ID parameter. It is true if the function is expected to send a response, false otherwise.

For getter functions this is enabled by default and cannot be disabled, because those functions will always send a response. For callback configuration functions it is enabled by default too, but can be disabled by tf_segment_display_4x7_v2_set_response_expected(). For setter functions it is disabled by default and can be enabled.

Enabling the response expected flag for a setter function allows to detect timeouts and other error conditions calls of this setter as well. The device will then send a response for this purpose. If this flag is disabled for a setter function then no response is sent and errors are silently ignored, because they cannot be detected.

The following constants are available for this function:

For function_id:

TF_SEGMENT_DISPLAY_4X7_V2_FUNCTION_SET_SEGMENTS = 1
TF_SEGMENT_DISPLAY_4X7_V2_FUNCTION_SET_BRIGHTNESS = 3
TF_SEGMENT_DISPLAY_4X7_V2_FUNCTION_SET_NUMERIC_VALUE = 5
TF_SEGMENT_DISPLAY_4X7_V2_FUNCTION_SET_SELECTED_SEGMENT = 6
TF_SEGMENT_DISPLAY_4X7_V2_FUNCTION_START_COUNTER = 8
TF_SEGMENT_DISPLAY_4X7_V2_FUNCTION_SET_WRITE_FIRMWARE_POINTER = 237
TF_SEGMENT_DISPLAY_4X7_V2_FUNCTION_SET_STATUS_LED_CONFIG = 239
TF_SEGMENT_DISPLAY_4X7_V2_FUNCTION_RESET = 243
TF_SEGMENT_DISPLAY_4X7_V2_FUNCTION_WRITE_UID = 248

int tf_segment_display_4x7_v2_set_response_expected(TF_SegmentDisplay4x7V2 *segment_display_4x7_v2, uint8_t function_id, bool response_expected)¶

Parameters:	segment_display_4x7_v2 – Type: TF_SegmentDisplay4x7V2 * function_id – Type: uint8_t, Range: See constants response_expected – Type: bool
Returns:	e_code – Type: int

Changes the response expected flag of the function specified by the function ID parameter. This flag can only be changed for setter (default value: false) and callback configuration functions (default value: true). For getter functions it is always enabled.

The following constants are available for this function:

For function_id:

TF_SEGMENT_DISPLAY_4X7_V2_FUNCTION_SET_SEGMENTS = 1
TF_SEGMENT_DISPLAY_4X7_V2_FUNCTION_SET_BRIGHTNESS = 3
TF_SEGMENT_DISPLAY_4X7_V2_FUNCTION_SET_NUMERIC_VALUE = 5
TF_SEGMENT_DISPLAY_4X7_V2_FUNCTION_SET_SELECTED_SEGMENT = 6
TF_SEGMENT_DISPLAY_4X7_V2_FUNCTION_START_COUNTER = 8
TF_SEGMENT_DISPLAY_4X7_V2_FUNCTION_SET_WRITE_FIRMWARE_POINTER = 237
TF_SEGMENT_DISPLAY_4X7_V2_FUNCTION_SET_STATUS_LED_CONFIG = 239
TF_SEGMENT_DISPLAY_4X7_V2_FUNCTION_RESET = 243
TF_SEGMENT_DISPLAY_4X7_V2_FUNCTION_WRITE_UID = 248

int tf_segment_display_4x7_v2_set_response_expected_all(TF_SegmentDisplay4x7V2 *segment_display_4x7_v2, bool response_expected)¶

Parameters:	segment_display_4x7_v2 – Type: TF_SegmentDisplay4x7V2 * response_expected – Type: bool
Returns:	e_code – Type: int

Changes the response expected flag for all setter and callback configuration functions of this device at once.

Internal Functions¶

Internal functions are used for maintenance tasks such as flashing a new firmware of changing the UID of a Bricklet. These task should be performed using Brick Viewer instead of using the internal functions directly.

int tf_segment_display_4x7_v2_set_bootloader_mode(TF_SegmentDisplay4x7V2 *segment_display_4x7_v2, uint8_t mode, uint8_t *ret_status)¶

Parameters:	segment_display_4x7_v2 – Type: TF_SegmentDisplay4x7V2 * mode – Type: uint8_t, Range: See constants
Output Parameters:	ret_status – Type: uint8_t, Range: See constants
Returns:	e_code – Type: int

Sets the bootloader mode and returns the status after the requested mode change was instigated.

You can change from bootloader mode to firmware mode and vice versa. A change from bootloader mode to firmware mode will only take place if the entry function, device identifier and CRC are present and correct.

This function is used by Brick Viewer during flashing. It should not be necessary to call it in a normal user program.

The following constants are available for this function:

For mode:

TF_SEGMENT_DISPLAY_4X7_V2_BOOTLOADER_MODE_BOOTLOADER = 0
TF_SEGMENT_DISPLAY_4X7_V2_BOOTLOADER_MODE_FIRMWARE = 1
TF_SEGMENT_DISPLAY_4X7_V2_BOOTLOADER_MODE_BOOTLOADER_WAIT_FOR_REBOOT = 2
TF_SEGMENT_DISPLAY_4X7_V2_BOOTLOADER_MODE_FIRMWARE_WAIT_FOR_REBOOT = 3
TF_SEGMENT_DISPLAY_4X7_V2_BOOTLOADER_MODE_FIRMWARE_WAIT_FOR_ERASE_AND_REBOOT = 4

For ret_status:

TF_SEGMENT_DISPLAY_4X7_V2_BOOTLOADER_STATUS_OK = 0
TF_SEGMENT_DISPLAY_4X7_V2_BOOTLOADER_STATUS_INVALID_MODE = 1
TF_SEGMENT_DISPLAY_4X7_V2_BOOTLOADER_STATUS_NO_CHANGE = 2
TF_SEGMENT_DISPLAY_4X7_V2_BOOTLOADER_STATUS_ENTRY_FUNCTION_NOT_PRESENT = 3
TF_SEGMENT_DISPLAY_4X7_V2_BOOTLOADER_STATUS_DEVICE_IDENTIFIER_INCORRECT = 4
TF_SEGMENT_DISPLAY_4X7_V2_BOOTLOADER_STATUS_CRC_MISMATCH = 5

int tf_segment_display_4x7_v2_get_bootloader_mode(TF_SegmentDisplay4x7V2 *segment_display_4x7_v2, uint8_t *ret_mode)¶

Parameters:	segment_display_4x7_v2 – Type: TF_SegmentDisplay4x7V2 *
Output Parameters:	ret_mode – Type: uint8_t, Range: See constants
Returns:	e_code – Type: int

Returns the current bootloader mode, see tf_segment_display_4x7_v2_set_bootloader_mode().

The following constants are available for this function:

For ret_mode:

TF_SEGMENT_DISPLAY_4X7_V2_BOOTLOADER_MODE_BOOTLOADER = 0
TF_SEGMENT_DISPLAY_4X7_V2_BOOTLOADER_MODE_FIRMWARE = 1
TF_SEGMENT_DISPLAY_4X7_V2_BOOTLOADER_MODE_BOOTLOADER_WAIT_FOR_REBOOT = 2
TF_SEGMENT_DISPLAY_4X7_V2_BOOTLOADER_MODE_FIRMWARE_WAIT_FOR_REBOOT = 3
TF_SEGMENT_DISPLAY_4X7_V2_BOOTLOADER_MODE_FIRMWARE_WAIT_FOR_ERASE_AND_REBOOT = 4

int tf_segment_display_4x7_v2_set_write_firmware_pointer(TF_SegmentDisplay4x7V2 *segment_display_4x7_v2, uint32_t pointer)¶

Parameters:	segment_display_4x7_v2 – Type: TF_SegmentDisplay4x7V2 * pointer – Type: uint32_t, Unit: 1 B, Range: [0 to 2³² - 1]
Returns:	e_code – Type: int

Sets the firmware pointer for tf_segment_display_4x7_v2_write_firmware(). The pointer has to be increased by chunks of size 64. The data is written to flash every 4 chunks (which equals to one page of size 256).

This function is used by Brick Viewer during flashing. It should not be necessary to call it in a normal user program.

int tf_segment_display_4x7_v2_write_firmware(TF_SegmentDisplay4x7V2 *segment_display_4x7_v2, const uint8_t data[64], uint8_t *ret_status)¶

Parameters:	segment_display_4x7_v2 – Type: TF_SegmentDisplay4x7V2 * data – Type: const uint8_t[64], Range: [0 to 255]
Output Parameters:	ret_status – Type: uint8_t, Range: [0 to 255]
Returns:	e_code – Type: int

Writes 64 Bytes of firmware at the position as written by tf_segment_display_4x7_v2_set_write_firmware_pointer() before. The firmware is written to flash every 4 chunks.

You can only write firmware in bootloader mode.

This function is used by Brick Viewer during flashing. It should not be necessary to call it in a normal user program.

int tf_segment_display_4x7_v2_write_uid(TF_SegmentDisplay4x7V2 *segment_display_4x7_v2, uint32_t uid)¶

Parameters:	segment_display_4x7_v2 – Type: TF_SegmentDisplay4x7V2 * uid – Type: uint32_t, Range: [0 to 2³² - 1]
Returns:	e_code – Type: int

Writes a new UID into flash. If you want to set a new UID you have to decode the Base58 encoded UID string into an integer first.

We recommend that you use Brick Viewer to change the UID.

int tf_segment_display_4x7_v2_read_uid(TF_SegmentDisplay4x7V2 *segment_display_4x7_v2, uint32_t *ret_uid)¶

Parameters:	segment_display_4x7_v2 – Type: TF_SegmentDisplay4x7V2 *
Output Parameters:	ret_uid – Type: uint32_t, Range: [0 to 2³² - 1]
Returns:	e_code – Type: int

Returns the current UID as an integer. Encode as Base58 to get the usual string version.

Constants¶

TF_SEGMENT_DISPLAY_4X7_V2_DEVICE_IDENTIFIER¶

This constant is used to identify a Segment Display 4x7 Bricklet 2.0.

The functions tf_segment_display_4x7_v2_get_identity() and tf_hal_get_device_info() have a device_identifier output parameter to specify the Brick's or Bricklet's type.

TF_SEGMENT_DISPLAY_4X7_V2_DEVICE_DISPLAY_NAME¶: This constant represents the human readable name of a Segment Display 4x7 Bricklet 2.0.